Need help finding brass or stainless exposed weightbolt for bumperless cue

T

thubosky

AzB Silver Member
Silver Member
Hi,

I am having a Titlist built and I'd like to find a brass weight bolt with the wide head to look good on the cue since it'll be bumperless. Please pm me if you have one or if you know where to get them. I also saw there could be titanium ones too.
Thanks,
Tim
 
if it were me

i would have the guy that is building the cue to supply the bolt. if he cannot find one you might need to get a different builder.

you can get one from ebay, or any large hardware store.


if you still cannot locate one, send me your address and i will send you a stainless steel piece. ask your builder if he can polish the head or does he want me to polish it for him.
 
desi2960 said:
i would have the guy that is building the cue to supply the bolt. if he cannot find one you might need to get a different builder.

you can get one from ebay, or any large hardware store.


if you still cannot locate one, send me your address and i will send you a stainless steel piece. ask your builder if he can polish the head or does he want me to polish it for him.
Click to expand...

Thanks, I sent you a PM.

Also, still looking for a brass weight bolt. I would also like to know what size and threads is used on a typical bumperless cue's weight bolt? If I knew this I might be able to find one locally.
Thanks,
Tim
 
You must log in or register to reply here.
Back
Top