New Cue Lathe Accessories

customcuelathe

customcuelathe

AzB Silver Member
Silver Member
Here are some new cue lathe accessories, I thought might come in handy.
1. The standard Taig carriage works great, but what if you can increase the diameter of your top slide dial and hand wheel. Check out the new taig hand wheels conversion kit
Converts the dial wheel from 1" to 2" diameter, hand wheel from 1.8" to 2.65" diameter
2. Sanding Mandrels: I have an over stock situation with Radial and 3/8-10 sanding mandrels. My original shipment got lost, so I had some more made, and now 3-weeks later the original package showed up ( go figure). So now I have twice the amount of parts. My mishap created an over stock situation on those mandrels. I have 15 radial sets and 12 3/8"-10 and 2 3/8"-11.
Those 29 sets will be sold at 25% off
$220 for each set, all orders must be received within the next 7 days.
3. Drive pins
I had 50 radial drive pins plus 9 other sizes for now $15 each
Thanks
Cell# 248-884-4469
I just added a new picture for the finished sanding mandrels. They turned out great. I still have 18 sets of carbide sleeves and the following joints:
3/8"-10 8 sets
3/8"-11 5 sets
Radial. 6 sets
Those 3 sizes orders will be available within one week any other sizes are available with 2-week lead time
Once those carbide sleeves are gone, I might not order any more, due to the 100 sleeves minimum per order, and the high cost of carbide. get yours while they are still available
Ps: I won't be able to make them for this price next time either, it was a one time offer based on a bigger quantity than I actually have.
42b83192-5c55-c6ba.jpg
 

Attachments

  • ImageUploadedByTapatalk1307296889.045273.jpg
    ImageUploadedByTapatalk1307296889.045273.jpg
    37.8 KB · Views: 2,640
  • ImageUploadedByTapatalk1307296934.217457.jpg
    ImageUploadedByTapatalk1307296934.217457.jpg
    33.1 KB · Views: 2,514
  • ImageUploadedByTapatalk1307296914_222633.jpg
    ImageUploadedByTapatalk1307296914_222633.jpg
    48.7 KB · Views: 2,222
  • IMG_1209[1].jpg
    IMG_1209[1].jpg
    83.9 KB · Views: 2,235
Last edited:
What are you considering a "set" of mandrels? 2 pc or 4 pc?
What size are the mandrels?

What are your drive pins made from- Aluminum or SS?
Do they have a "female" end (making them maintenance pins) or are they "pin only?"

Maybe this is all in another thread, but it makes sense to have the details in a "for sale" thread, right?
Thanks!
 
ELBeau said:
What are you considering a "set" of mandrels? 2 pc or 4 pc?
What size are the mandrels?

What are your drive pins made from- Aluminum or SS?
Do they have a "female" end (making them maintenance pins) or are they "pin only?"

Maybe this is all in another thread, but it makes sense to have the details in a "for sale" thread, right?
Thanks!
Click to expand...

Those are all good questions, I apologize for not clarifying that in my listing
A set is one male one female, they all come oversized at 0.880", and the customer can specify what size they want, and I can then ground then to the desired size.
The maintenance pins are made out of 6061 aluminum 5/8" round stock
Each pin has both male and female.
Regards
 
You are makeing thing tough on the other guys . great stuff . Love that carrage . Good stuff . Thanks Jim
 
Jim Baxter said:
You are makeing thing tough on the other guys . great stuff . Love that carrage . Good stuff . Thanks Jim
Click to expand...

Thanks Jim
The 3/8"-11 are sold out for now, you can still order any size joint, and I can have them made it will only take couple of week more, right now, I am having 30 sets made, thats why I can sell them for a cheaper,
Remaining Mandrels sets at the $220 price:
3/8"- 10 6 sets remaining
Radial 12 sets Remaining
3/8"-11 sold out for now, but 10 more sets will be here by friday still $220
5/16-14, 5/16-18 and all the other sizes are available ( only 10 sets of carbide left for all the other sizes for now).
those will always be available as a special order item.
Best regards
Bassel
248-884-4469
 
customcuelathe said:
Here are some new cue lathe accessories, I thought might come in handy.
1. The standard Taig carriage works great, but what if you can increase the diameter of your top slide dial and hand wheel. Check out the new taig hand wheels conversion kit
Converts the dial wheel from 1" to 2" diameter, hand wheel from 1.8" to 2.65" diameter
2. Sanding Mandrels: I have an over stock situation with Radial and 3/8-10 sanding mandrels. My original shipment got lost, so I had some more made, and now 3-weeks later the original package showed up ( go figure). So now I have twice the amount of parts. My mishap created an over stock situation on those mandrels. I have 15 radial sets and 12 3/8"-10 and 2 3/8"-11.
Those 29 sets will be sold at 25% off
$220 for each set, all orders must be received within the next 7 days.
3. Drive pins
I had 50 radial drive pins plus 9 other sizes for now $15 each
Thanks
Cell# 248-884-4469
I just added a new picture for the finished sanding mandrels. They turned out great. I still have 18 sets of carbide sleeves and the following joints:
3/8"-10 8 sets
3/8"-11 5 sets
Radial. 6 sets
Those 3 sizes orders will be available within one week any other sizes are available with 2-week lead time
Once those carbide sleeves are gone, I might not order any more, due to the 100 sleeves minimum per order, and the high cost of carbide. get yours while they are still available
Ps: I won't be able to make them for this price next time either, it was a one time offer based on a bigger quantity than I actually have.
42b83192-5c55-c6ba.jpg
Click to expand...

Check out the picture of tony's and Larry's sanding mandrels, and you can see they were grounded as a set, so when they are screwed together you can't even see the joint looks like one piece which is exactly what you want your cue joint to look like.
42b83192-5e3e-96eb.jpg
42b83192-5e58-4374.jpg
 
Busbee Cue said:
Still waiting, it has been four weeks as of today!!
Click to expand...

Guys
Sorry for the long wait. As some of you may know already the original batch were grounded incorrectly and resulted in an unsaleble product, a new and better batch was made since and they will be getting grounded next week. Those are custom made and very complicated parts. The parts will be done in couple of weeks and they will definitely meet everyone's expectations, just be patient, and you all will get them soon. I am doing my best.
Thanks
 
customcuelathe said:
Guys
Sorry for the long wait. As some of you may know already the original batch were grounded incorrectly and resulted in an unsaleble product, a new and better batch was made since and they will be getting grounded next week. Those are custom made and very complicated parts. The parts will be done in couple of weeks and they will definitely meet everyone's expectations, just be patient, and you all will get them soon. I am doing my best.
Thanks
Click to expand...

I sent you an email Bassel reguarding this product.
 
Communication

Sir,

I understand things happen. I appreciate the information. Please keep me informed.
V/r
Richard
 
Last edited:
Bassel- Thanks for the info. These things happen. I'll be happy to wait. I'm sure the mandrels will be great.
 
customcuelathe said:
Guys
Sorry for the long wait. As some of you may know already the original batch were grounded incorrectly and resulted in an unsaleble product, a new and better batch was made since and they will be getting grounded next week. Those are custom made and very complicated parts. The parts will be done in couple of weeks and they will definitely meet everyone's expectations, just be patient, and you all will get them soon. I am doing my best.
Thanks
Click to expand...

Hi,

Why sell parts that have not been received, inspected and beta tested. You are better off to have them in hand ready to ship before you take them to market.

Once the flaming starts it is hard to stop. Your stuff could be the best there is but when these guys hear excuses "I am doing my best" they may get a bad image of you brand.

I was thinking of buying some parts but now I will wait and see to hear feedback.

Good Luck,

Rick G
 
You must log in or register to reply here.
Back
Top