I am interested in selling this cue as I have a cue being built.
It is a used Russ Espiritu Custom Cue with 2 shafts. The signature isn't on the cue but I just received verification from Russ that he built the cue in the early 90s.
The cue is ebony on ebony, 1 green veneer, 4 ivory recut points, 10 ivory inlays in the butt sleeve, ivory slotted rings in positions C, D and E with 2 green stacked veneers on each side of these rings. The cue has a black leather wrap.
Stainless steel piloted 5/16-18 pin joint.
The butt weighs 16.2 ounces and has a .1 ounce weight bolt in it.
The newer looking shaft is 12.6mm and weighs 4.1 ounces and the ferrule appears to be ivory. (I had a cue collector look at it for a while and it isn't grainy and he thought it didn't look like a standard ferrule)
The older looking shaft is 12.6 mm and weighs 3.9 ounces. This is a standard ferrule.
Condition of the cue:
This came from a local cue collector:
The cue doesn't have any dings or gouges.
He figured the finish to be in about 80% after deep inspection under a magnifying glass.
Both of the shafts rolls straight and so does the butt. When either of the shafts and the butt are rolled together, there is a wobble to it. The collector said it is a taper roll. I know that it doesn't affect play as this cue hits great.
Please ask any other questions that you have or if you want additional pictures I can email those. I am not the best with a digital camera but I will try my best.
Thank you for your interest. I will try to respond as quickly as possible. I have a tourney all day tomorrow (Saturday 2/16). You can send emails as well to joshshones@gmail.com.
I am looking to get $700 shipped. Thank you.
It is a used Russ Espiritu Custom Cue with 2 shafts. The signature isn't on the cue but I just received verification from Russ that he built the cue in the early 90s.
The cue is ebony on ebony, 1 green veneer, 4 ivory recut points, 10 ivory inlays in the butt sleeve, ivory slotted rings in positions C, D and E with 2 green stacked veneers on each side of these rings. The cue has a black leather wrap.
Stainless steel piloted 5/16-18 pin joint.
The butt weighs 16.2 ounces and has a .1 ounce weight bolt in it.
The newer looking shaft is 12.6mm and weighs 4.1 ounces and the ferrule appears to be ivory. (I had a cue collector look at it for a while and it isn't grainy and he thought it didn't look like a standard ferrule)
The older looking shaft is 12.6 mm and weighs 3.9 ounces. This is a standard ferrule.
Condition of the cue:
This came from a local cue collector:
The cue doesn't have any dings or gouges.
He figured the finish to be in about 80% after deep inspection under a magnifying glass.
Both of the shafts rolls straight and so does the butt. When either of the shafts and the butt are rolled together, there is a wobble to it. The collector said it is a taper roll. I know that it doesn't affect play as this cue hits great.
Please ask any other questions that you have or if you want additional pictures I can email those. I am not the best with a digital camera but I will try my best.
Thank you for your interest. I will try to respond as quickly as possible. I have a tourney all day tomorrow (Saturday 2/16). You can send emails as well to joshshones@gmail.com.
I am looking to get $700 shipped. Thank you.