Older Espiritu with Ivory Points

Only ERO's

AzB Silver Member
Silver Member
I am interested in selling this cue as I have a cue being built.

It is a used Russ Espiritu Custom Cue with 2 shafts. The signature isn't on the cue but I just received verification from Russ that he built the cue in the early 90s.

The cue is ebony on ebony, 1 green veneer, 4 ivory recut points, 10 ivory inlays in the butt sleeve, ivory slotted rings in positions C, D and E with 2 green stacked veneers on each side of these rings. The cue has a black leather wrap.

Stainless steel piloted 5/16-18 pin joint.

The butt weighs 16.2 ounces and has a .1 ounce weight bolt in it.

The newer looking shaft is 12.6mm and weighs 4.1 ounces and the ferrule appears to be ivory. (I had a cue collector look at it for a while and it isn't grainy and he thought it didn't look like a standard ferrule)

The older looking shaft is 12.6 mm and weighs 3.9 ounces. This is a standard ferrule.

Condition of the cue:

This came from a local cue collector:

The cue doesn't have any dings or gouges.

He figured the finish to be in about 80% after deep inspection under a magnifying glass.

Both of the shafts rolls straight and so does the butt. When either of the shafts and the butt are rolled together, there is a wobble to it. The collector said it is a taper roll. I know that it doesn't affect play as this cue hits great.

Please ask any other questions that you have or if you want additional pictures I can email those. I am not the best with a digital camera but I will try my best.

Thank you for your interest. I will try to respond as quickly as possible. I have a tourney all day tomorrow (Saturday 2/16). You can send emails as well to joshshones@gmail.com.

I am looking to get $700 shipped. Thank you.

poolcue012.jpg


poolcue003.jpg


poolcue001.jpg
 
Questions

What collector did you buy this cue from?

Can you provide a picture of the Espiritu signature on the cue?

Thanks

Kevin
 
Kevin Lindstrom said:
What collector did you buy this cue from?

Can you provide a picture of the Espiritu signature on the cue?

Thanks

Kevin

There isn't a signature on the cue. I am assuming the owner before me had it refinished at some point and it was removed then.

I posted this in the cue gallery asking to get a hold of Russ and he verified through email that he did make it and it was made in the early 90's. He even went to saying that I need to get his signature back on there.

I bought the cue online sometime back, I can't remember where it was.

Thank you.
 
FAST_N_LOOSE said:
I Love Propellors......

Was This Just On Ebay?

I have had it on Ebay recently with a lot of interest. I wasn't able to verify that Russ built the cue until a few days ago.
 
Only ERO's said:
I am interested in selling this cue as I have a cue being built.

It is a used Russ Espiritu Custom Cue with 2 shafts. The signature isn't on the cue but I just received verification from Russ that he built the cue in the early 90s.

The cue is ebony on ebony, 1 green veneer, 4 ivory recut points, 10 ivory inlays in the butt sleeve, ivory slotted rings in positions C, D and E with 2 green stacked veneers on each side of these rings. The cue has a black leather wrap.

Stainless steel piloted 5/16-18 pin joint.

The butt weighs 16.2 ounces and has a .1 ounce weight bolt in it.

The newer looking shaft is 12.6mm and weighs 4.1 ounces and the ferrule appears to be ivory. (I had a cue collector look at it for a while and it isn't grainy and he thought it didn't look like a standard ferrule)

The older looking shaft is 12.6 mm and weighs 3.9 ounces. This is a standard ferrule.

Condition of the cue:

This came from a local cue collector:

The cue doesn't have any dings or gouges.

He figured the finish to be in about 80% after deep inspection under a magnifying glass.

Both of the shafts rolls straight and so does the butt. When either of the shafts and the butt are rolled together, there is a wobble to it. The collector said it is a taper roll. I know that it doesn't affect play as this cue hits great. Please ask any other questions that you have or if you want additional pictures I can email those. I am not the best with a digital camera but I will try my best.

Thank you for your interest. I will try to respond as quickly as possible. I have a tourney all day tomorrow (Saturday 2/16). You can send emails as well to joshshones@gmail.com.

I am looking to get $700 shipped. Thank you.

Josh,

The "collector" speaketh ka-ka by calling this a "taper roll' issue. The cue presents this feature because it isn't properly centered, crooked pin, crooked insert or face off required. These issues are easily corrected whereas "taper roll", on the other hand, ..........

Nice cue and for 7hun somebody will be stealing
 
Back
Top