1) Jerry Olivier: $SOLDOBO
Butt: 15.48oz, 3/8-10 with phenolic joint, leather wrap, Floating ivory points and inlays
S1: 3.75oz, 12.65mm, CM98-HH25
S2: 3.25oz, 12.86mm, CM98-SH25
Straight together and apart.
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/483070732_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/475147324_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/475147304_o.jpg
2) Classic 8pt exotic Verl Horn custom cue w 4 shafts: $3000.00
The forearm in this cue have 4 high and 4 low points with recuts of pink ivory and Ivory Points.
Butt: 16.04 oz, 3/8-10 with exotic joint and butt cap, original white Cortland Irish linen wrap
(Verl Horn in Tulsa, Ok was very well known for putting on the smoothest and tightest Irish linen wrap)
S1: 3.23oz, 11.45mm, unknown tip, very slight roll out
S2: 3.75oz, 11.95mm, Hard Molavia tip, Straight
New S3: 4.15oz plus, 12.90mm, Hard Molavia, Micarta Ferrulle, Dead Straight
New S3: 4.00oz plus, 12.82mm, Hard Molavia, Micarta Ferrule, Dead Straight
Butt rolls straight with 2 brand new shafts built by Paul Dayton.
Butt roll straight alone but has a very slight roll out at the joint when it together with either original shafts.
This cue was recently restored by Paul Dayton ensuring that the original wrap was only cleaned and kept original. I believe the original finish was partly retained and Paul also made 2 brand new shafts for this cue per spec above. It's definitely my top 10 best player cues of all time and I've gone through hundreds of custom cues.
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/485617913_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/485617779_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/485617686_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/485617611_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/485617476_o.jpg
3) Unknown Titlist Conversion: $1000.00
Butt: 14.11 oz, stainless steel, 5/16-14 pin (super solid player)
S1: 4.10 oz, 12.80mm, Hard Molavia
S2: 3.83 oz, 12.75mm, Hard Molavia
This is a monster straight pool cue...very easy to run ball with. I've played with higher end cue and can't seem to run consistently but with this cue for some reason it's some much easier. I generally prefer lighter cue with playing straight pool. Also, I have a nice Dennis Searing shaft that fit this cue perfectly.
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/475147257_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/475147231_o.jpg
10) 1996 custom Skip Weston:
* Ivory joint 3/8-10 pin.
* Solid Snakewood butt sleeve with ivory inlays.
* Birdeye maple forearm with Snakewood points and ivory inlays
* The cue butt alone weigh in at 15.39 oz and both shafts are 3.72 oz (12.6 MM blue diamond tip) and 3.64 oz (12.65 mm Tip unknown and has slight roll out).
* The butt is straight and one of the shaft is straight while the other has a slight roll out...together the cue roll straight.
* Snakewood points
Asking $1800 shipped or Best Offer considered
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/317258651_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/317258582_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/317258520_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/317258447_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/317258300_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/317258409_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/317258233_o.jpg
9) Joss West Custom: $3500.00
Butt: 15.3 oz,
Shaft #1: 4.4oz,12.88mm, ivory ferrule
Shaft #1: 4.4oz,13.05mm, ivory ferrule
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/378005563_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/378005531_o.jpg
10) Jerry McWorter: $3000.00
Butt 15.2 oz, butt number is "1680" meaning will always make money in chinese
Shaft #1: 3.8oz,13.05mm, ivory ferrule
Shaft #2: 4.0oz,13.05mm, ivory ferrule
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/378006123_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/378006079_o.jpg
11) Mike BENDER: $3000.00
Butt: 15.2oz, some finish scratches in the butt...one heck of a player's cue.
Shaft #1. 3.8 oz,12.7mm ivory ferrule
Shaft #2. 3.9 oz,12.77mm ivory ferrule
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/487120079_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/486996468_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/486996578_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/486996523_o.jpg
12) Older Ed Prewitt Custom Cue: $1400.00
Butt 15.0 oz
Shaft #1. 4.2 oz,12.4mm, ivory
Shaft #2. 4.2 oz,12.75mm, ivory (Not original shaft)
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/377945725_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/377945617_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/377945543_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/377945480_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/377945396_o.jpg
13) Custom High End Tascarella:
* Ivory Joint 5/16-14 and Ivory Butt Cap
* Rosewood forearm and Butt Sleeve, 4 ebony points with veneers
* Ivory inlays everywhere.
* Butt is 14.6 oz and shaft are 4.2oz both are 13mm.
I let the pics do the talking.....asking $6000.00 Reduced!!
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/341997811_o.jpg
14) High End Custom Kikel: $3600.00</b>
Butt: 15.3 oz
Shaft #1: 4.1 oz, 12.93mm, moori, Ivory Ferrule
Shaft#2: 4.2 oz, 12.95mm, moori, Ivory Ferrule
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/378005461_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/377949716_o.jpg
15) High End Capone Custom cue with exotic Burl:
Just picked this beautiful brand new unchalked Capone cue up and looking to see if there any interest for the cue here on AZ. The cue butt is made of amboyna burl weighing in at 15.5oz and the original shafts both shaft are 3.6oz each at 13.0+mm. Both the butt and one shaft is dead straight. One of the brand new shaft has a slight roll out but roll flat (Unchalked). The cue has Capone signature radial pin with silver railroad track ring work in all positions. The cue has 6 amboyna burl points (3 high and 3 lower) into jet black ebony forearm with diamond ivory inlays. The butt also has 6 larger diamond ivory inlays. I'll let the pictures describe the cue. Looking to get $2650.00/BO for this cue. Trade for SW may be considered as well.
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/435806798_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/435806814_o.jpg
16) Joel Weinstock/CM98: No Longer Available.
Butt: 14.90oz, 3/8-11, Ivory Joint, Richard Harris original ring work, 29" long
Shaft: 3.7oz, 13.05mm, CM98 Molavia 35 Type B, Westinghouse Micarta installed, 29.75" long.
Straight together and apart.
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/475145245_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/475145274_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/475145302_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/475145217_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/475145190_o.jpg
5) Cory Barnhart Exotic 4pts Hoppe: $1250.00
This Barnhart has an exotic burl forearm with ivory joint,ivory hoppe ring and Cory's classic ringwork. (awesome player)
Butt: 15.1oz
Shaft: 3.7oz, Full size 13mm.
6) Cory Barnhart Wrapless 5pts: $700.00 shipped
5 points with ebony forearm.
Butt: 15.2oz
Shaft: 3.7oz, full size 13mm.
7) 2002 Mike Gulyassy w/1 new shaft: $500.00
Butt: 15.55oz
S1: 3.57oz, 12.90mm, Hard Molavia
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/466537529_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/466537577_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/466537624_o.jpg
8) CM98 8pt full splice hoppe: $450[/B][/COLOR]
Butt: 13.75 oz
Shaft: 12.65mm, 3.99oz Hard Molavia
Other shaft pictured is sold!
Straight Together and apart
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/475149185_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/475149109_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/475149156_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/475149065_o.jpg
9) CM98 8pt full splice hoppe: $450.00
Butt: 13.85 oz
Shaft: Paul Mottey shaft 12.85mm, 3.31oz, hard Molavia
Shaft: 12.83mm, 3.54oz, Hard Molavia
Straight apart and together.
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/475145142_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/475145082_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/475145116_o.jpg
Butt: 15.48oz, 3/8-10 with phenolic joint, leather wrap, Floating ivory points and inlays
S1: 3.75oz, 12.65mm, CM98-HH25
S2: 3.25oz, 12.86mm, CM98-SH25
Straight together and apart.
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/483070732_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/475147324_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/475147304_o.jpg
2) Classic 8pt exotic Verl Horn custom cue w 4 shafts: $3000.00
The forearm in this cue have 4 high and 4 low points with recuts of pink ivory and Ivory Points.
Butt: 16.04 oz, 3/8-10 with exotic joint and butt cap, original white Cortland Irish linen wrap
(Verl Horn in Tulsa, Ok was very well known for putting on the smoothest and tightest Irish linen wrap)
S1: 3.23oz, 11.45mm, unknown tip, very slight roll out
S2: 3.75oz, 11.95mm, Hard Molavia tip, Straight
New S3: 4.15oz plus, 12.90mm, Hard Molavia, Micarta Ferrulle, Dead Straight
New S3: 4.00oz plus, 12.82mm, Hard Molavia, Micarta Ferrule, Dead Straight
Butt rolls straight with 2 brand new shafts built by Paul Dayton.
Butt roll straight alone but has a very slight roll out at the joint when it together with either original shafts.
This cue was recently restored by Paul Dayton ensuring that the original wrap was only cleaned and kept original. I believe the original finish was partly retained and Paul also made 2 brand new shafts for this cue per spec above. It's definitely my top 10 best player cues of all time and I've gone through hundreds of custom cues.
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/485617913_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/485617779_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/485617686_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/485617611_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/485617476_o.jpg
3) Unknown Titlist Conversion: $1000.00
Butt: 14.11 oz, stainless steel, 5/16-14 pin (super solid player)
S1: 4.10 oz, 12.80mm, Hard Molavia
S2: 3.83 oz, 12.75mm, Hard Molavia
This is a monster straight pool cue...very easy to run ball with. I've played with higher end cue and can't seem to run consistently but with this cue for some reason it's some much easier. I generally prefer lighter cue with playing straight pool. Also, I have a nice Dennis Searing shaft that fit this cue perfectly.
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/475147257_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/475147231_o.jpg
10) 1996 custom Skip Weston:
* Ivory joint 3/8-10 pin.
* Solid Snakewood butt sleeve with ivory inlays.
* Birdeye maple forearm with Snakewood points and ivory inlays
* The cue butt alone weigh in at 15.39 oz and both shafts are 3.72 oz (12.6 MM blue diamond tip) and 3.64 oz (12.65 mm Tip unknown and has slight roll out).
* The butt is straight and one of the shaft is straight while the other has a slight roll out...together the cue roll straight.
* Snakewood points
Asking $1800 shipped or Best Offer considered
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/317258651_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/317258582_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/317258520_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/317258447_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/317258300_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/317258409_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/317258233_o.jpg
9) Joss West Custom: $3500.00
Butt: 15.3 oz,
Shaft #1: 4.4oz,12.88mm, ivory ferrule
Shaft #1: 4.4oz,13.05mm, ivory ferrule
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/378005563_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/378005531_o.jpg
10) Jerry McWorter: $3000.00
Butt 15.2 oz, butt number is "1680" meaning will always make money in chinese
Shaft #1: 3.8oz,13.05mm, ivory ferrule
Shaft #2: 4.0oz,13.05mm, ivory ferrule
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/378006123_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/378006079_o.jpg
11) Mike BENDER: $3000.00
Butt: 15.2oz, some finish scratches in the butt...one heck of a player's cue.
Shaft #1. 3.8 oz,12.7mm ivory ferrule
Shaft #2. 3.9 oz,12.77mm ivory ferrule
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/487120079_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/486996468_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/486996578_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/486996523_o.jpg
12) Older Ed Prewitt Custom Cue: $1400.00
Butt 15.0 oz
Shaft #1. 4.2 oz,12.4mm, ivory
Shaft #2. 4.2 oz,12.75mm, ivory (Not original shaft)
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/377945725_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/377945617_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/377945543_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/377945480_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/377945396_o.jpg
13) Custom High End Tascarella:
* Ivory Joint 5/16-14 and Ivory Butt Cap
* Rosewood forearm and Butt Sleeve, 4 ebony points with veneers
* Ivory inlays everywhere.
* Butt is 14.6 oz and shaft are 4.2oz both are 13mm.
I let the pics do the talking.....asking $6000.00 Reduced!!
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/341997811_o.jpg
14) High End Custom Kikel: $3600.00</b>
Butt: 15.3 oz
Shaft #1: 4.1 oz, 12.93mm, moori, Ivory Ferrule
Shaft#2: 4.2 oz, 12.95mm, moori, Ivory Ferrule
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/378005461_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/377949716_o.jpg
15) High End Capone Custom cue with exotic Burl:
Just picked this beautiful brand new unchalked Capone cue up and looking to see if there any interest for the cue here on AZ. The cue butt is made of amboyna burl weighing in at 15.5oz and the original shafts both shaft are 3.6oz each at 13.0+mm. Both the butt and one shaft is dead straight. One of the brand new shaft has a slight roll out but roll flat (Unchalked). The cue has Capone signature radial pin with silver railroad track ring work in all positions. The cue has 6 amboyna burl points (3 high and 3 lower) into jet black ebony forearm with diamond ivory inlays. The butt also has 6 larger diamond ivory inlays. I'll let the pictures describe the cue. Looking to get $2650.00/BO for this cue. Trade for SW may be considered as well.
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/435806798_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/435806814_o.jpg
16) Joel Weinstock/CM98: No Longer Available.
Butt: 14.90oz, 3/8-11, Ivory Joint, Richard Harris original ring work, 29" long
Shaft: 3.7oz, 13.05mm, CM98 Molavia 35 Type B, Westinghouse Micarta installed, 29.75" long.
Straight together and apart.
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/475145245_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/475145274_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/475145302_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/475145217_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/475145190_o.jpg
5) Cory Barnhart Exotic 4pts Hoppe: $1250.00
This Barnhart has an exotic burl forearm with ivory joint,ivory hoppe ring and Cory's classic ringwork. (awesome player)
Butt: 15.1oz
Shaft: 3.7oz, Full size 13mm.
6) Cory Barnhart Wrapless 5pts: $700.00 shipped
5 points with ebony forearm.
Butt: 15.2oz
Shaft: 3.7oz, full size 13mm.
7) 2002 Mike Gulyassy w/1 new shaft: $500.00
Butt: 15.55oz
S1: 3.57oz, 12.90mm, Hard Molavia
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/466537529_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/466537577_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/466537624_o.jpg
8) CM98 8pt full splice hoppe: $450[/B][/COLOR]
Butt: 13.75 oz
Shaft: 12.65mm, 3.99oz Hard Molavia
Other shaft pictured is sold!
Straight Together and apart
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/475149185_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/475149109_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/475149156_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/475149065_o.jpg
9) CM98 8pt full splice hoppe: $450.00
Butt: 13.85 oz
Shaft: Paul Mottey shaft 12.85mm, 3.31oz, hard Molavia
Shaft: 12.83mm, 3.54oz, Hard Molavia
Straight apart and together.
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/475145142_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/475145082_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/475145116_o.jpg
Last edited:
