Post All the Stuff You Want to Sell or Trade

UGOTDA7 said:
Hercek (Blue Book cue, scrimshaw rings and butt sleeve).
Hercek (ivory inlays and ivory joint).
Tascarella (Brazilian rosewood, 4 points).
Bludworth (all ebony/ivory).
Schick (rosewood w/birdseye wrap, ivory inlays and joint).
Gilbert jump/break (purpleheart).
Gilbert jump/break (tulipwood).
Phillippi (ivory, turquoise, silver).
Olivier Model 10 "Parica" cue (ivory joint and buttcap).
Arnot (purpleheart, no points, ivory joint by Phillippi, T3 shaft, Predator shaft).
Scruggs SP (cocobolo joint and buttcap, original and Predator shaft).
Click to expand...

Tascarella has been sold.
 
I have a like new 2005 Paul Mottey on ebay, item no.7171267325. It has a 3/8 X 10 ivory joint, pigskin leather wrap(nicely done) 4 ebony points 4 veneers(black,orange,blue,white) curly maple forearm, ebony butt with delrin buttcap, 2-13mm shafts, 4.2oz. each(1 with light play) ivory ferrules and new med. morri's, signed P. Mottey 2-2005 between points, 19.7oz. balanced very well, very solid hitter. $1500.00 + shipping. You can reach me at roymjr2@aol.com, thanks
 
Here are the cues I still have for sale:

Schon SL-1. This cue is used but in excellent condition. This model is no longer made but is similar to the current STL-1. It comes with one old style Schon shaft.

Pechauer P21. This cue is used but in mint condition. It has floating cocobola points inlayed with ivory. This cue and description can also be seen on the Pechauer website.

Chad Carter custom. The cue has an ivory joint and come with two shafts with ivory ferrules. The forearm is tiger maple with 8 double veneered high/low points of amboyna burl. The cue is new, however the finish has lifted around some of the rings.

The Schon SL-13 in the photos is no longer available.
 

Attachments

  • pic2.jpg
    pic2.jpg
    96.6 KB · Views: 147
  • pic1.jpg
    pic1.jpg
    88.7 KB · Views: 168
Shorty said:
Tony Bautista from the Phillipines made this cue under the name Jazz Cue, dated 04.

*Comes 2 shafts. 1 13 mm diameter and 1 12.25mm hard rock maple shafts with industrial PVC ferrules
*Pigskin layared tips installed
*18.9 oz weight
*Balance point is 2" from the joint handle
*Pin 5/16 x 14, flat face
*110+ inlays of Amboyna, Genuine Elephant Tusk Ivory, etc.
*Handle is cored spliced maple
*58 inches
*Comes with Amboyna/Ebony protectors

Cue is very pretty and has a great balance. 1 shaft has been turned down from original pictures here...no nicks or dings.

Looking to get $450 shipped for this cue. It retails close to $1200. Just selling to make room for another titleist.

Shorty
Click to expand...

Hey Shorty
Why would you want to sell this cue. It looks like a keeper to me.
Kevin
 
UGOTDA7 said:
Hercek (Blue Book cue, scrimshaw rings and butt sleeve).
Hercek (ivory inlays and ivory joint).
Tascarella (Brazilian rosewood, 4 points).
Bludworth (all ebony/ivory).
Schick (rosewood w/birdseye wrap, ivory inlays and joint).
Gilbert jump/break (purpleheart).
Gilbert jump/break (tulipwood).
Phillippi (ivory, turquoise, silver).
Olivier Model 10 "Parica" cue (ivory joint and buttcap).
Arnot (purpleheart, no points, ivory joint by Phillippi, T3 shaft, Predator shaft).
Scruggs SP (cocobolo joint and buttcap, original and Predator shaft).
Click to expand...

gilbert tulip wood jump break umm how much one of those go for????
 
Nice Micro Tech Auto knife

I have a Nice Micro Tech Auto knife I weould love to find a home for, something ever Hustler Might Need it an Emergency....

Knife is NEW in the Box with Warranty Card, and will only be shipped to a State Were Procession is Legal

Asking $310.00 Delivered


MICROTECH ULTRATECH II

The next generation of Ultratech, the Ultratech II builds upon success of the previous design and adds a number of improvements. Gone are the flat side slabs, they have been replaced with a ergonomicly swelled, gradiated step design that both increases gripping comfort and retention. The pocket clip has been moved to the back of the knife which allows for a slightly deeper pocket carry. The pocket clip also serves as a lanyard attachment point for a secondary retention device.
ratech II
Length, Open:
8.25"*

Length, Closed:
4.875"

Blade Length:
3.5"

Blade Material:
154-CM

Handle Material:
6061 T6
Aircraft Aluminum

Locking Method:
Friction

Opening Method:
Thumb switch

Clip:
Yes

Weight:
3.7 oz

Opening and closing are accomplished though the sliding switch - move it forward 1/2 inch and the knife rockets open using the ingenious dual spring system. When in place, the knife is locked solidly open until you reverse the switch, where the blade retracts fully into the handle.

Each Microtech Ultratech II comes with a ballistic nylon duty sheath.


PM ME if Interested.... ;)
 

Attachments

  • mt-ut2_sm.jpg
    mt-ut2_sm.jpg
    9.9 KB · Views: 354
Last edited:
for sale!

here's what I got for sale. I have my cocobolo DZ cue, and I have a nice condition 1x2 black it's george case also. I'd like some money to buy a new predator shaft w/ 3/8x10 joint for my maple cue. I also have a DZ sneaky pete (05) for sale if anyone's interested. my sneaky pete I need $200, my cocobolo DZ is open to trade, and my 1x2 case is open to offers. anyone interested, let me know. thanks,Jeff
 
Following the lead for listing non-pool related items, I have the following:

--New Kooks long tube headers with hardware for a 2003 Cobra--$800

--Badlander take-off seat from a 2005 Harley Night Train--$50

--Take-off wheels (rear w/pulley) from a 2005 Harley Night Train--$100

To answer the earlier question on the tulipwood Gilbert j/b--price is $350 shipped within the U.S. These Gilbert j/b cues are usually priced at $400, this one also has an added Moori III medium tip. I have been playing with one (rosewood) for about a year, in my opinon they are among the best all around cues out there, they do everything well.
 
Vinman said:
Here are the cues I still have for sale:

Schon SL-1. This cue is used but in excellent condition. This model is no longer made but is similar to the current STL-1. It comes with one old style Schon shaft.

Pechauer P21. This cue is used but in mint condition. It has floating cocobola points inlayed with ivory. This cue and description can also be seen on the Pechauer website.

Chad Carter custom. The cue has an ivory joint and come with two shafts with ivory ferrules. The forearm is tiger maple with 8 double veneered high/low points of amboyna burl. The cue is new, however the finish has lifted around some of the rings.

The Schon SL-13 in the photos is no longer available.
Click to expand...
hey vinman
i could be interested in your sl-1 ,condition?,weight?,tip size?
get back to me thanks sly
 
sly said:
hey vinman
i could be interested in your sl-1 ,condition?,weight?,tip size?
get back to me thanks sly
Click to expand...

Hi Sly,

I wasn't able to PM you for some reason. Can you PM me with a way to contact you? Thanks!
 
Bruce S. de Lis said:
I have a Nice Micro Tech Auto knife I weould love to find a home for, something ever Hustler Might Need it an Emergency....
.....PM ME if Interested.... ;)
Click to expand...
Sheesh. I hope I never cross you!! :eek: :p :D
 
ScottR said:
I still have this cue and am entertaining serious offers. Please, no insults or I send Shorty after you! :D
Click to expand...
I just got two visuals...
Pick one and that will be Shorty's new avatar :D

pzTSMPT0023.jpg


And i couldn't find the exact pic i was looking for but this is good enough...
3707R.jpg
 
I have 2-ginacues, one from the early 60's and one from the late 60's

1-Richard Black cue

1- Joss from the 70's with an ivory joint
 
I'm interested in any older McDermotts, no airbrushed or decaled ones please. 80s or 90s mostly.

DawgAndy
Also a Gentile person :D
 
yo

badabing said:
I have 2-ginacues, one from the early 60's and one from the late 60's

1-Richard Black cue

1- Joss from the 70's with an ivory joint
Click to expand...

ive been looking for a old gina.
could i get pics, measurements, and prices?

chris
413-297-2100
 
You must log in or register to reply here.
Back
Top