Here's an option.
If you know someone who does lasar engraving
And is GOOD AT IT,
That could work.
schon butt cap?
- Thread starter old-newbe
- Start date
If you know someone who does lasar engraving
And is GOOD AT IT,
That could work.
DannyWilde
New member
Thank you. But I think my chances are very small
DannyWilde
New member
Thank you. This could be a possibility. I will try to find someone, who could do this. But I could imagine that no one wants to do it, for fear of producing a forgery.
DannyWilde
New member
@Michael Webb
Do you think, there's an option to buy a used one somewhere?
Do you think, there's an option to buy a used one somewhere?
You just never know.
I think there's a Schon collectors site on FB
Great place to ask.
DannyWilde
New member
Thanks for your help
If you buy a used butt cap, and mount it, it is going to need turned, sanded, and finished if it is going to match up perfectly.
Very rarely do we see such parts for sale. They would be from a broken cue. And then, they were turned on that exact cue when it was made. They were perfectly matched on a lathe.
How could it end up? Hard to say. Hard to believe it would be as perfect as a Schön should be.
If I were serious about such a project, I would be talking to Schön.
They could replace the butt cap, if they were willing, or make an entirely brand new cue to suit your needs.
I see you are in Germany, which adds some complications.
If you have a butt cap made and engraved by anyone other than Schön, it is a counterfeit. Honest tradesmen would refuse to do it. If you put a used butt cap on, it is a frankencue.
It's your cue, do whatever you damn well please with it. But I think your adventure could easily be a misadventure.
Personally, I have swapped a few butt caps. But not on anything of any brand significance, and certainly not putting a makers mark on one.
Very rarely do we see such parts for sale. They would be from a broken cue. And then, they were turned on that exact cue when it was made. They were perfectly matched on a lathe.
How could it end up? Hard to say. Hard to believe it would be as perfect as a Schön should be.
If I were serious about such a project, I would be talking to Schön.
They could replace the butt cap, if they were willing, or make an entirely brand new cue to suit your needs.
I see you are in Germany, which adds some complications.
If you have a butt cap made and engraved by anyone other than Schön, it is a counterfeit. Honest tradesmen would refuse to do it. If you put a used butt cap on, it is a frankencue.
It's your cue, do whatever you damn well please with it. But I think your adventure could easily be a misadventure.
Personally, I have swapped a few butt caps. But not on anything of any brand significance, and certainly not putting a makers mark on one.
Personally,
If it's broken. Take a picture of it. Then replace it so you can play with it.
If it's broken. Take a picture of it. Then replace it so you can play with it.
DannyWilde
New member
@Chopdoc
@Michael Webb
I completely agree with you on every point. However, I would only do it for myself because I don't like the black butt cap. Naturally, I would keep the black one and restore the cue to its original condition if I were to sell it. They are an SL 13 and an STL 13. If I were to send the cues to Schön, it would be disproportionately expensive, and—more importantly—customs would confiscate them, meaning they would be lost forever.
@Michael Webb
I completely agree with you on every point. However, I would only do it for myself because I don't like the black butt cap. Naturally, I would keep the black one and restore the cue to its original condition if I were to sell it. They are an SL 13 and an STL 13. If I were to send the cues to Schön, it would be disproportionately expensive, and—more importantly—customs would confiscate them, meaning they would be lost forever.
DannyWilde
New member
DannyWilde
New member
It's a SL13 and a STL 13.
Schon is about a 3 hr drive from me, but near our family we visit and I stop in now and then for this and that. A few yrs back I cracked the butt cap on one of my Schon's, a beautiful SP I had purchased a couple years before. I was spinning around by my house table and it contacted a stand up table. I was sick as I'm really careful with my cues and none of them have a mark on them. A few weeks later we were going to visit family so I stopped at Schon on a Friday morning to drop it off to get fixed.
Had a good talk with the guy that designed it, it was a no wrap, and when telling him I was in town for the weekend, he looked at me and said, I hope you don't need it done this afternoon. I laughed and said no, but just wanted the cap to match the original in color and have the SP markings.
Monday morning we get a call from Schon as we were driving home and the guy said my cue was done as he rushed it in case I was still in town. We were too far away to turn around so I had them ship it.
Fantastic service, cap was perfect in color and everything. $125 very reasonable all considered.
Had a good talk with the guy that designed it, it was a no wrap, and when telling him I was in town for the weekend, he looked at me and said, I hope you don't need it done this afternoon. I laughed and said no, but just wanted the cap to match the original in color and have the SP markings.
Monday morning we get a call from Schon as we were driving home and the guy said my cue was done as he rushed it in case I was still in town. We were too far away to turn around so I had them ship it.
Fantastic service, cap was perfect in color and everything. $125 very reasonable all considered.
OK, POST 29 IN CASE y'all didn't read it.
