Hi Guys,
Here's are a few of the lower end cues in my inventory that I'm clearing out!!! Check them out!!
Cue #1: Limited Schon cue $625 shipped!!
This is a limited edition schon cue but unfortunately the butt cap was broken and it was replaced. Ideally I would have sent this back to schon as they can repair and replace it with the proper butt cap. The butt is dead straight and the original shaft has a very slight taper roll. The additional shaft is suppose to be an older schon and it does has a slight roll. Older shaft weigh in at 3.61 oz with a 12.5mm tip...original shaft is 4.10 oz with about 13mm tip. The original shaft has a slight taper roll and the older schon shaft has a roll out but it's playable as the tip roll flat on the table. The butt is dead straight and weigh in at 14.88 oz.
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/320966658_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/320966530_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/320966088_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/320965950_o.jpg
Cue #2: Old Huebler with 2 non-original shaft ($SOLD!! Shipped)
This is an older huebler with 2 shafts that not original. The butt weigh in at 16.30 oz and the newer straight shaft is 13mm at 3.66 oz. The other shaft has a roll out and does play well with this huebler at 13mm weigh in at 3.8 oz. The butt is straight...check out the pics:
Cue #3: Break cue by CAM cue (House cue conversion) $160 shipped.
This is plain simple conversion from a house cue into a break cue by CAM cue. The butt weight in at 14.03 oz and the builder use a really nice piece with straight grain maple forearm. The shaft is about 13mm with a phenolic tip and weigh in at 3.83 oz. Cue break really nice...and I think with an additional shaft it would also be a nice player!! Check out the pics:
Cue #4: Ebony Paul Dayton Cue $300.00 shipped
I have an nice ebony plain jane cue made by Paul Dayton...the cue play great unfortunately these a roll out on the handle but the shaft is dead straight as it the forearm. When you sight the cue from the forearm to the tips..it perfect..so this will not affect playability. A refinish and handle replacement is definitely worth on this cue as it play rock solid.
Cue #5: Dale Taegue custom cue with 2 shafts (1 original, 1 cuemaster98) $499 shipped!!
This cue plays as well as any SW...custom made to be 59" long, the Dale Teague play rock solid. It has one original shaft and a custom shaft that I've built for it with no ferrule. I just installed a new wrap on this cue as well but there are some finish chip on this cue. Will post spec and pics shortly.
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/321233732_o.jpg
Cue #6: Full Splice Conversion by Cuemaster98 $SOLD Shipped.
Here a nice conversion cue that I've made with one of my full splice near finish blank. The cue has the classic 4 points and 4 veneers with a leather wrap installed.
Check out this image...I have a bunch of other cues here..if you see anything you like..PM Me and I will forward more details:
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/305011789_o.jpg
1) Michael Morgan: $SOLD shipped
2) Paul Rubino Billiard Cue: $500 Shipped
3) Custom Billiard Cue: $150 Shipped
4) SOLD!!
5) Full Splice Sneaky Pete $135 shipped
6) Sold!! Full Splice conversion $SOLD shipped! I can make more if you're interested.
7) Full Splice Sneaky Pete $SOLDshipped
8) Jerry Olivier purpleheart full splice 8 pts wrapless: SOLD shipped!!
9) Jerry Olivier Full splice 8 pts wrapless: 750 shipped!!
10) Paul Dayton ebony merry widow: $285 shipped
11) Dale Teague w/2 shaft and new wrap: 500 shipped
12) Sold
13) Doug Patrick Conversion with 2 shaft: $650 shipped
14) Doug patrick Conversion with 2 shaft: $550 shipped
15) Full splice unilock conversion with PDF Ivory Shaft. 185 shipped
16) Merry Widow Sold!!!
17) 3/8-10 full splice conversion SOLD shipped
18) 8 pts full splice conversion with 2 shafts 500 shipped!!
Here's are a few of the lower end cues in my inventory that I'm clearing out!!! Check them out!!
Cue #1: Limited Schon cue $625 shipped!!
This is a limited edition schon cue but unfortunately the butt cap was broken and it was replaced. Ideally I would have sent this back to schon as they can repair and replace it with the proper butt cap. The butt is dead straight and the original shaft has a very slight taper roll. The additional shaft is suppose to be an older schon and it does has a slight roll. Older shaft weigh in at 3.61 oz with a 12.5mm tip...original shaft is 4.10 oz with about 13mm tip. The original shaft has a slight taper roll and the older schon shaft has a roll out but it's playable as the tip roll flat on the table. The butt is dead straight and weigh in at 14.88 oz.


http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/320966658_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/320966530_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/320966088_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/320965950_o.jpg
Cue #2: Old Huebler with 2 non-original shaft ($SOLD!! Shipped)
This is an older huebler with 2 shafts that not original. The butt weigh in at 16.30 oz and the newer straight shaft is 13mm at 3.66 oz. The other shaft has a roll out and does play well with this huebler at 13mm weigh in at 3.8 oz. The butt is straight...check out the pics:
Cue #3: Break cue by CAM cue (House cue conversion) $160 shipped.
This is plain simple conversion from a house cue into a break cue by CAM cue. The butt weight in at 14.03 oz and the builder use a really nice piece with straight grain maple forearm. The shaft is about 13mm with a phenolic tip and weigh in at 3.83 oz. Cue break really nice...and I think with an additional shaft it would also be a nice player!! Check out the pics:





Cue #4: Ebony Paul Dayton Cue $300.00 shipped
I have an nice ebony plain jane cue made by Paul Dayton...the cue play great unfortunately these a roll out on the handle but the shaft is dead straight as it the forearm. When you sight the cue from the forearm to the tips..it perfect..so this will not affect playability. A refinish and handle replacement is definitely worth on this cue as it play rock solid.
Cue #5: Dale Taegue custom cue with 2 shafts (1 original, 1 cuemaster98) $499 shipped!!
This cue plays as well as any SW...custom made to be 59" long, the Dale Teague play rock solid. It has one original shaft and a custom shaft that I've built for it with no ferrule. I just installed a new wrap on this cue as well but there are some finish chip on this cue. Will post spec and pics shortly.

http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/321233732_o.jpg
Cue #6: Full Splice Conversion by Cuemaster98 $SOLD Shipped.
Here a nice conversion cue that I've made with one of my full splice near finish blank. The cue has the classic 4 points and 4 veneers with a leather wrap installed.
Check out this image...I have a bunch of other cues here..if you see anything you like..PM Me and I will forward more details:

http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/305011789_o.jpg
1) Michael Morgan: $SOLD shipped
2) Paul Rubino Billiard Cue: $500 Shipped
3) Custom Billiard Cue: $150 Shipped
4) SOLD!!
5) Full Splice Sneaky Pete $135 shipped
6) Sold!! Full Splice conversion $SOLD shipped! I can make more if you're interested.
7) Full Splice Sneaky Pete $SOLDshipped
8) Jerry Olivier purpleheart full splice 8 pts wrapless: SOLD shipped!!
9) Jerry Olivier Full splice 8 pts wrapless: 750 shipped!!
10) Paul Dayton ebony merry widow: $285 shipped
11) Dale Teague w/2 shaft and new wrap: 500 shipped
12) Sold
13) Doug Patrick Conversion with 2 shaft: $650 shipped
14) Doug patrick Conversion with 2 shaft: $550 shipped
15) Full splice unilock conversion with PDF Ivory Shaft. 185 shipped
16) Merry Widow Sold!!!
17) 3/8-10 full splice conversion SOLD shipped
18) 8 pts full splice conversion with 2 shafts 500 shipped!!
Last edited: