slate screws

[rikdee]

Anyone know of a source for #16 x 3 1/2 flat head wood screws?

 

[realkingcobra]

Anyone know of a source for #16 x 3 1/2 flat head wood screws?

Drop them and get some 1/4" x 20 x 4" machine screws with washers & nuts to mount the slates.

 

[Jim Vondrell]

Drop them and get some 1/4" x 20 x 4" machine screws with washers & nuts to mount the slates.

Wouldn't that depend on the type of table? At least use Phillips head screws. 16's are probably bigger than you'll find in most hardware stores. Try Fastenal online.

 

[realkingcobra]

Wouldn't that depend on the type of table? At least use Phillips head screws. 16's are probably bigger than you'll find in most hardware stores. Try Fastenal online.

He has a GC:grin:

 

[ROB.M]

Post

Glen has a SweeeEeeet fix for the angled slate screw holes.
Too sweet; like spreaden butter'

Rob.M

 

[Travis3c]

1/4 X 4 with fender washers and locknuts on a gold crown 3 I set up last month.

 

[realkingcobra]

1/4 X 4 with fender washers and locknuts on a gold crown 3 I set up last month.

That's the way to fix the slate screws forever