Flex said:I'm thinking of getting a production grade snooker cue for use as a pool cue, to use especially for 9 ball, but also for 8 ball, 14.1 and one hole.
What brands/cues that are available in the U.S. would you recommend? What tip size? Taper?
Flex
Flex said:I'm thinking of getting a production grade snooker cue for use as a pool cue, to use especially for 9 ball, but also for 8 ball, 14.1 and one hole.
What brands/cues that are available in the U.S. would you recommend? What tip size? Taper?
Flex
cardiac kid said:Hi Craig,
This past weekend in Las Vegas, I watched one of your countrymen miss-cue several times per set attempting to play bar box nine ball with his snooker cue. Think twice. Perhaps three times. Sorry, I don't remember his name.
Lyn
Flex said:I'm thinking of getting a production grade snooker cue for use as a pool cue, to use especially for 9 ball, but also for 8 ball, 14.1 and one hole.
Flex
Hail Mary Shot said:just have yourself an 11mm shaft and a super pro taper. though I can play with those snooker cues with brass ferrule, I don't prefer them nor recommend them. Ash woods are stiff, but lacks some feel and feedback in them.
IMO and experience with snooker cues, they are good for accuracy but lacks the necessary CB action that a pool cue could do. probably due to the tip size which can go way below 10mm. I had used a 9mm.
smashmouth said:why ?? big mistake imo
dabarbr said:You do gain a fair amount of accuracy with the smaller tip, in regards to pocketing balls, however it takes a tramendous amount of a skill to strike the cue dead center when you don't want any side spin. Just a fraction off center will impart a lot of unwanted spin on the cue ball making it difficult to control the cue ball.
It takes a very good player with a lot of warm up to keep from over spinning the cue ball. Many times you will be two and out in tournament play before you get the feel of this small tip.
You will find that in order to play well you will quit fighting the extra spin and instead find yourself adding more spin. Instead of fighting the unwanted spin you will decide to join it. Now you will really have a complicated game.
I played with such a thing for many years, but I played every day for hours and hours at a time. When I was in tune with it I was hard to beat.
Eventually I saw that that I needed more consistancy with my game and went to a happy medium for me which was a 12.25 mm.
My advise is don't do it.
Mostly a tip between 10.5 and 11.0. Back in those day things were not as technical as they are today.Flex said:What size tip were you using on that cue?
Another good thing with my 11mm tip as noted above is that it squirts the cue ball much less than a Predator, and I confess to liking the lowered adjustments necessary when shooting power shots with english.
Flex said:In the quest for the ultimate cue for my style of game, of course.
Flex said:Hmmm.... well, I did have Schmelke make me a custom cocobolo sneaky pete with an 11 mm shaft, a 1/4 inch ferrule, a 16 inch pro taper, 19 ounces weight. Plays jam up. In essence, what I have is pretty close to a snooker cue then.
Do you think that a maple or ash shaft is better for this kind of cue?
Flex