T-Nuts for top of Cuesmith Deluxe Headstock

T

tg_vegas

Well-known member
Anyone know of a source for the "nuts" that slide in the T channel on the top of our Cuesmith Deluxe Headstocks?

I have designed a bracket that uses these slots to mount a digital RPM readout and would rather not have to make these if I can just buy them.
 
Just do a quick search for square nuts or thin square nuts, they also make rectangular nuts which would also work. Get them in the thread for the screws you'll likely be using. Home Depot also has a pretty good selection if you have one nearby.

Edit: Obviously make sure the nut itself fits in the groove. ;)
 
Last edited:
Thanks.. I wouldn't have thought this a common enough of a nut to be available at home depot. I'll check that out , thanks!
 
If it's the same size as the ones used on the cross slide, they are sold lots of places. Search for these:

Square Nut: #10-32 Thread Size, Steel, 1/8 in Height, 3/8 in wide​

 
tg_vegas said:
Anyone know of a source for the "nuts" that slide in the T channel on the top of our Cuesmith Deluxe Headstocks?

I have designed a bracket that uses these slots to mount a digital RPM readout and would rather not have to make these if I can just buy them.
Click to expand...
Check with Cueman, I’m sure he can help you. He’s always had the answer for me.
 
You must log in or register to reply here.
Back
Top