>>>>>>>>>>>> TS -- Loaded With Ivory -- VERY UNUSUAL -- MINT & STRAIGHT >>>>>>>>>>>>

Quality Cues

Quality Cues

AzB Gold Member
Gold Member
Silver Member
>>>>>>>>>>>> TS -- Loaded With Ivory -- VERY UNUSUAL -- MINT & STRAIGHT >>>>>>>>>>>>

This Tim Scruggs is in MINT CONDITION & ROLLS DEAD STRAIGHT together and apart. The butt sleeve and 4 razor-sharp points are Cocobolo. Each point has 5 veneers. All the white inlays in the cue are Ivory (the butt cap is not). The joint is flat-faced stainless steel with a radial pin. MAN WHAT A MONSTER HIT! The wrap is seamless brown lizard.

The specs are:

Length: 29.0" + 29.0" = 58.0"

Weight: 19.1 oz. with one shaft and 19.0 oz. with the other; the butt alone weighs 15.3 oz.

Shaft Diameters: 12.89 mm and 12.82 mm.

My CASH price is $2,290.00 or best offer (payment terms to be agreed upon) delivered by USPS Express Mail with full insurance to any point in the Continental U.S.

entireforearmwith1pointandshaftring.jpg

buttsleevewithlogoandshaftrings.jpg

entireforearmwith2pointsandshaftrin.jpg

buttsleevewithoutlogoand2windows.jpg

entireforearmwith1pointandtips.jpg

tipof1point.jpg

lizardwrap.jpg

entireforearmwith2pointsandtips2.jpg

buttsleevealonewithlogo.jpg

tipof1poin2.jpg
 
Last edited:
your use of >>>>>>>>>>>> and <<<<<<<<<<<< is a bit distracting in finding what you have for sale. Almost makes you dizzy..

Nice cue Mike. Good luck with the sale..
 
Nice, that has the diameters I like too. If I take a very quick glance without looking too hard, the forearm kind of looks like an older BB, or maybe I'm a retard.

He doesn't make many radial pin cues does he? Also, seems like most cuemakers don't use a stainless steel joint with a radial pin. This must have quite a unique hit to it.
 
spanky981 said:
your use of >>>>>>>>>>>> and <<<<<<<<<<<< is a bit distracting in finding what you have for sale. Almost makes you dizzy..

Nice cue Mike. Good luck with the sale..
Click to expand...
Will only add that when looking at things on my phone (long work days recently) that the actual title does not appear on screen so I tend to miss it.

Pretty cue and a very good price.
Nothing but the best once again Mike.

See you in a couple of weeks.
 
alpine9430 said:
Will only add that when looking at things on my phone (long work days recently) that the actual title does not appear on screen so I tend to miss it.

Pretty cue and a very good price.
Nothing but the best once again Mike.

See you in a couple of weeks.
Click to expand...

Hi Myron:

Yes, I will see you at the Expo. I ticketed a flight just last week, I'll call you before the trip to VF.
 
sly_shooter said:
Nice, that has the diameters I like too. If I take a very quick glance without looking too hard, the forearm kind of looks like an older BB, or maybe I'm a retard.

He doesn't make many radial pin cues does he? Also, seems like most cuemakers don't use a stainless steel joint with a radial pin. This must have quite a unique hit to it.
Click to expand...

I have not seen another Scruggs with a flat-faced stainless steel joint with a radial pin. Yes, the hit is unique and superb.
 
Scruggs Joint

That's probably been the most common joint coming out of the Scruggs shop for quite a while. It's a stainless steel joint sleeve with a Radial pin.
 
cjohnsonjr said:
That's probably been the most common joint coming out of the Scruggs shop for quite a while. It's a stainless steel joint sleeve with a Radial pin.
Click to expand...

Like I said, it's the first TS cue that I recall seeing with a flat-faced stainless steel joint, and I've seen thousands of cues in the past 6 years.
 
Last edited:
Quality Cues said:
And I'm sure that there are others. Kudos to you for finding one.
Click to expand...

WASN'T REAL HARD..... IT'S HERE WITH ME.

I JUST WANTED THE OTHER GUYS LOOKING TO KNOW THAT THE JOINT ISN'T ALL THAT RARE.

JUST LIKE YOU MADE SURE TO CHIME IN ON MY CANTANDO THREAD AND THEN EDIT YOUR POST AFTER YOU WERE CALLED OUT ABOUT IT.

GOOD LUCK WITH YOUR SALE.

Marcus
 
FAST_N_LOOSE said:
WASN'T REAL HARD..... IT'S HERE WITH ME.

I JUST WANTED THE OTHER GUYS LOOKING TO KNOW THAT THE JOINT ISN'T ALL THAT RARE.

JUST LIKE YOU MADE SURE TO CHIME IN ON MY CANTANDO THREAD AND THEN EDIT YOUR POST AFTER YOU WERE CALLED OUT ABOUT IT.

GOOD LUCK WITH YOUR SALE.

Marcus
Click to expand...

I never used the word "rare." The cue is unusual because of the combination of the joint and the fact that it has 5 veneers, but I'm sure that you are looking at one of those as well. Perhaps I should chime in on your BB thread and the ridiculous price you are asking for the cue.
 
Last edited:
Hay guys

This cue isn't a oldie. It hasn't been all that long Timi or Mike started using the radial pin. I know it wasn't an option in 2000. They both are earlier radial pinned cues as far as that goes.
They started machining the front of the radial pins after a while and have stayed with it. You two have some sweet cues!
This is alot of cue for under $2300.00.
Nick :)
 
Quality Cues said:
Perhaps I should chime in on your BB thread and the ridiculous price you are asking for the cue.
Click to expand...

I MENTIONED NOTHING ABOUT YOUR PRICE HERE, BUT I CAN IF YOU WANT ME TO?

I SIMPLY PROVIDED A PICTURE.

FEELING A BIT DEFENSIVE?

Marcus
 
You must log in or register to reply here.
Back
Top