Weight of 1.5" slate (9' table, 3 pieces)

R

RussLickteig

Registered
Hey everyone,

Heard from a friend that slate is typically 168lbs per cubic foot. I have a 9' table to move that has 1.5" slate. My quick calculation comes back at 244 pounds for each of the three pieces. Is this correct? Numbers used. 100" x 50" and 1.5" thick. Comes back at 4.34ft3 x 168lbs = 730 / 3 = 244lbs. This seems light because everyone has been telling me they will be around 400-500lbs each. Looking for any personal experience here.

Thanks! Russ
 
RussLickteig said:
Hey everyone,

Heard from a friend that slate is typically 168lbs per cubic foot. I have a 9' table to move that has 1.5" slate. My quick calculation comes back at 244 pounds for each of the three pieces. Is this correct? Numbers used. 100" x 50" and 1.5" thick. Comes back at 4.34ft3 x 168lbs = 730 / 3 = 244lbs. This seems light because everyone has been telling me they will be around 400-500lbs each. Looking for any personal experience here.

Thanks! Russ
Click to expand...
Your figures are pretty close. An entire 9ft GC, frame and all, weighs about 1,200lbs. Each piece doesn't weigh 4-500lbs.
 
Last edited:
RussLickteig said:
Hey everyone,

Heard from a friend that slate is typically 168lbs per cubic foot. I have a 9' table to move that has 1.5" slate. My quick calculation comes back at 244 pounds for each of the three pieces. Is this correct? Numbers used. 100" x 50" and 1.5" thick. Comes back at 4.34ft3 x 168lbs = 730 / 3 = 244lbs. This seems light because everyone has been telling me they will be around 400-500lbs each. Looking for any personal experience here.

Thanks! Russ
Click to expand...
300 pounds per piece, which is 50% more than the standard 200 pounds per piece for 1 inch thick slates. Your figures are off because the playing area is indeed 100“ x 50” but the overall slate measurement is 107“ x 57“.
 
Last edited:
RussLickteig said:
Hey everyone,

Heard from a friend that slate is typically 168lbs per cubic foot. I have a 9' table to move that has 1.5" slate. My quick calculation comes back at 244 pounds for each of the three pieces. Is this correct? Numbers used. 100" x 50" and 1.5" thick. Comes back at 4.34ft3 x 168lbs = 730 / 3 = 244lbs. This seems light because everyone has been telling me they will be around 400-500lbs each. Looking for any personal experience here.

Thanks! Russ
Click to expand...

That's very thick slate, similar to what you might find in an Anniversary table. Gold Crown slate is typically 1" thick, maybe 1&1/8" in the GCI's. I'm guessing each piece is closer to 250-275 pounds.
 
jay helfert said:
That's very thick slate, similar to what you might find in an Anniversary table. Gold Crown slate is typically 1" thick, maybe 1&1/8" in the GCI's. I'm guessing each piece is closer to 250-275 pounds.
Click to expand...
Anniv. had 1" slates. GC's were 1" unless Brunstone and those were thicker(1.25").
 
a guy on facebook showed me a forumla for it, said he inported slate for many yrs, i looked and looked but cant find it

basically my slate (on my 10ft carom table) which is 50mm, 1.968 inches
is over 500lbs a piece
 
Good catch on the 107-57! Ok...really appreciate everyone's input here. 300 is so much better than 500!!! Won't loose nearly as much sleep thinking about "moving day"! :)
 
I agree with 300 being close. 1" slate for 9ft is typically about 200 maybe 225. So 100lbs per 1/2" thick works out to be 300 for your piece
 
RussLickteig said:
Hey thanks for the info. What does "62 GC I" mean? New to the pool table world.

Never mind! Just did some research and figured it out!
Click to expand...

1962 Brunswick Gold Crown I....the beginning of that table design with ball boxes and rail counters (the fat easy ones to rotate for 14.1 scoring).
When the GC III's came into being the smaller numbering counters were introduced to fill the same holes, they were More difficult to rotate and were not of the same quality.
 
I have a 2000 Diamond Professional with 3 piece slate.
It's 1.5 inches thick. I was told when it was delivered
and set up that each piece weighed 275 lbs. Heavy for
sure, we rolled it down the steps on a low profile Dolly.
The table weighs just under 1400 lbs, with 975 lbs of
that being slate.

Not sure if this helps, just thought I'd add to the thread.
At any rate, thoughts and prayers for your back :)
 
You must log in or register to reply here.
Back
Top