wtb...a few weight bolts

cueaddicts

cueaddicts

AzB Gold Member
Silver Member
Was curious if anyone has a few of these to spare? Looking for six (6) of these....aluminum, ~2-2.5" length, 3/8-16, drilled and tapped for bumper screw. Send me a message and let me know what you've got and price.

Thanks !!
 

Attachments

  • PART_1378927073473.jpg
    PART_1378927073473.jpg
    43.8 KB · Views: 366
If I may ask, Why do you want an aluminum weight bolt. Why not steel or brass?
 
If the cue is already to the desired wght. you still need something to screw the bumper to.
 
scdiveteam said:
Sean,

Try Ace Hardware.

Rick
Click to expand...

Been there and done that. I don't think you will find them at any hardware store. If you do, please let me know.

I have tried to buy these aluminum flat head screws in a 3/8-16 thread. I have been to most fastener companies and no luck. The size stops at 1/4-20 and no larger. No one that I found makes them as a standard piece of hardware. I talked to the man that runs Connecticut Cue Parts and he said "that's why we make them." All of their threaded screws have a rolled thread not a cut thread.

Kim
 
whammo57 said:
Been there and done that. I don't think you will find them at any hardware store. If you do, please let me know.

I have tried to buy these aluminum flat head screws in a 3/8-16 thread. I have been to most fastener companies and no luck. The size stops at 1/4-20 and no larger. No one that I found makes them as a standard piece of hardware. I talked to the man that runs Connecticut Cue Parts and he said "that's why we make them." All of their threaded screws have a rolled thread not a cut thread.

Kim
Click to expand...

Exactly, Kim. No luck at any local hardware stores.
 
aluminum bolt

http://www.aluminumfastener.com/images/catalog.pdf

Scroll down to page 16.

Don't know the minimum, and they aren't drilled and tapped for the bumper screw.

As far as I can find, CT cue parts is the best/cheapest place to buy the slotted ones, unless you need a whole lot of them. But they only make one length.
 
cutter said:
http://www.aluminumfastener.com/images/catalog.pdf

Scroll down to page 16.

Don't know the minimum, and they aren't drilled and tapped for the bumper screw.

As far as I can find, CT cue parts is the best/cheapest place to buy the slotted ones, unless you need a whole lot of them. But they only make one length.
Click to expand...

Great information.... you would need to drill and tap each one for the #10 screw to hold on the bumper. They say that you must buy a box of 100. I bet they are not cheap.

CT cue parts has them for $2.50 each, drilled - tapped - and with the #10 screw......... I think that's a great deal. I think their min order is $45. I use them and they work great and weigh about 1/4 oz.

Kim
 
light flathead screws

I have used nylon flat head 3/8-16 screws to anchor bumpers to when weight saving was critical. They are available in hardware stores as toilet seat hardware. Very light.

Robin Snyder
 
You must log in or register to reply here.
Back
Top