Had a friend from the league ask me last night to try and find him his first custom cue...his budget is $400-$500.... Shaft/shafts must be in the 12.75 range...no production cues...please post pics/specs and price here...No pm's please.....thanks, Brian
WTB custom cue $400-$500
- Thread starter doctorb98
- Start date
Go check out BCMCUE.COM. Bryan Mordt has a TON of cue for that price range and is a very reputable builder. He may have some near completion to sell, check his page. You can get a brand new cue from Bryan for that price range and have some choices. I have his cues and can't say enough good about him or his cues!
How about one of mine?
I'm asking $450 shipped for the one shown below.
Specs:
19.15 oz. (15.2 butt / 3.95 shaft)
balanced 18 1/2" from butt cap
13mm dia. tip
.850" dia. joint (Black Phenolic)
1.250 dia. Butt cap (Black Phenolic)
3/8-10 joint pin
Titan ferrule
Ultraskin medium Tip
Holly Forearm and Butt Sleeve
Wrapless Curly Purpleheart handle
Ebony points w/3 veneers (yellow/orange/red)
Purpleheart diamonds at base of points
Purpleheart, ebony and redheart inlays in buttsleeve
Purpleheart (yellow/black/yellow) stitch rings at joint and buttsleeve
I'm asking $450 shipped for the one shown below.
Specs:
19.15 oz. (15.2 butt / 3.95 shaft)
balanced 18 1/2" from butt cap
13mm dia. tip
.850" dia. joint (Black Phenolic)
1.250 dia. Butt cap (Black Phenolic)
3/8-10 joint pin
Titan ferrule
Ultraskin medium Tip
Holly Forearm and Butt Sleeve
Wrapless Curly Purpleheart handle
Ebony points w/3 veneers (yellow/orange/red)
Purpleheart diamonds at base of points
Purpleheart, ebony and redheart inlays in buttsleeve
Purpleheart (yellow/black/yellow) stitch rings at joint and buttsleeve
I have more.
I also have a number of cues that are less than your $400-$500 price target.
Let me know if any of these interest you.
I also have a number of cues that are less than your $400-$500 price target.
Let me know if any of these interest you.
I'll sell this Tom Coker cue for $500 with one shaft, the 12.8mm shaft. And if he needs a case I'll put it in a case for him.
http://forums.azbilliards.com/showpost.php?p=4155063&postcount=1
http://forums.azbilliards.com/showpost.php?p=4155063&postcount=1
Last edited:
Tom makes one hell of a cue. I played with one for years, now I build my own. Great price on that too.
Leon Sly....
Hello! Here is an amazing playing cue, by a very reputable maker... $525 including shipping, insurance and Paypal fees.
http://forums.azbilliards.com/showthread.php?t=317334
Leon Sly 4 point cue. Cocobolo into birsdeye, no veneers. Standard build short splice, not a sneaky conversion. Beautiful wood as you can see from the pictures. Small mineral spot came out on the final pass. Ringwork at joint and matching ringwork on shaft. Cue only a couple months old, played twice for about an hour total. Weight just under 19, I believe Leon said it was 18.7 if memory serves correct. Radial pin. Sly sells these for $750 new.
Link to all the pictures of the cue...
http://forums.azbilliards.com/album.php?albumid=1469 (click on any picture to enlarge)
Hello! Here is an amazing playing cue, by a very reputable maker... $525 including shipping, insurance and Paypal fees.
http://forums.azbilliards.com/showthread.php?t=317334
Leon Sly 4 point cue. Cocobolo into birsdeye, no veneers. Standard build short splice, not a sneaky conversion. Beautiful wood as you can see from the pictures. Small mineral spot came out on the final pass. Ringwork at joint and matching ringwork on shaft. Cue only a couple months old, played twice for about an hour total. Weight just under 19, I believe Leon said it was 18.7 if memory serves correct. Radial pin. Sly sells these for $750 new.
Link to all the pictures of the cue...
http://forums.azbilliards.com/album.php?albumid=1469 (click on any picture to enlarge)
Attachments
Fisher Merry Widow
Hello Brian,
I have a Bryan Fisher Bacote/Curly Maple Merry Widow with 2 shafts. There's a little taper roll in one of the shafts & the other is straight.
I also live in NJ and play at Sandcastle in Edison once in a while so we could meet there and he could check it out to see if he likes it.
If a picture is worth 1000 words, then seeing/trying it out is worth 1000 pictures - LOL.
I'm looking for $400 & that's firm.
If he wants to go to $600, I also have a nice Jack Madden Cocobolo/BEM Merry Widow that I could bring along as well.
If he has any interest, just PM me back and we can set up a time to meet.
Best regards & happy hunting!
Harry
Hello Brian,
I have a Bryan Fisher Bacote/Curly Maple Merry Widow with 2 shafts. There's a little taper roll in one of the shafts & the other is straight.
I also live in NJ and play at Sandcastle in Edison once in a while so we could meet there and he could check it out to see if he likes it.
If a picture is worth 1000 words, then seeing/trying it out is worth 1000 pictures - LOL.
I'm looking for $400 & that's firm.
If he wants to go to $600, I also have a nice Jack Madden Cocobolo/BEM Merry Widow that I could bring along as well.
If he has any interest, just PM me back and we can set up a time to meet.
Best regards & happy hunting!
Harry
Heres a brand new PFD. I would work on the price.
http://forums.azbilliards.com/showthread.php?t=318790
http://forums.azbilliards.com/showthread.php?t=318790