WTB: Joint protectors to fit an old R-series Schon

[SeanC]

Looking for these:

There is also this kind, but it doesn't fit an R-series Schon:

So let me know if you have anything of the 1st kind for sale. I need a 3 or a 4 piece set (1 butt, 2-3 shafts)...

Or if you have anything else that you're positive that it'll fit an R, please let me know. Thanks...

 

[SeanC]

Still looking...

 

[pooldawg8]

Hey brother
Have you tried shooting a PM to ''Troy'' azb member KOINNKID?
He may be able to help you out or give you a leed. Its worth a shot.
GL in your search
Jeff

 

[Realizm]

Shoot me your address i will give you some ...

 

[SeanC]

Hey brother
Have you tried shooting a PM to ''Troy'' azb member KOINNKID?
He may be able to help you out or give you a leed. Its worth a shot.
GL in your search
Jeff

Thanks Jeff, I always forget Troy is the person for Schon cues/accessories!

Shoot me your address i will give you some ...

Pm sent sir, thank you :thumbup2:

 

[stevekur1]

Be careful with the Plastic Pin joint protectors, i have had a few that the pin on them snapped off inside of the shaft !

-Steve

 

[SeanC]

Be careful with the Plastic Pin joint protectors, i have had a few that the pin on them snapped off inside of the shaft !

-Steve

That certainly is a concern, but I thought these were high quality Delrin j/p's. Maybe only the pin is cheap plastic?

 

[Jim Baxter]

Here are some I have made in the past .

With stich ring , like R seres or plain , both made from ebony with stainless steel pins and brass inserts .
So many ways to make the cue look nice and protect it at the same time .

If interested Pm me and we will discuss price .

 

[PDX]

Depending on how old your Schon is, the pin pitch is different, IIRC, for Runde era. You can't put a Runde Schon shaft on a post 93 Schon.

 

[SeanC]

Here are some I have made in the past .

With stich ring , like R seres or plain , both made from ebony with stainless steel pins and brass inserts .
So many ways to make the cue look nice and protect it at the same time .

If interested Pm me and we will discuss price .

Jim, pm sent.

Depending on how old your Schon is, the pin pitch is different, IIRC, for Runde era. You can't put a Runde Schon shaft on a post 93 Schon.

Yep, mine is from the 82-85 era, quite possibly from '82. After some research, I found out that Runde era 5/16x14 joints are 0.01'' undersized in the major diameter, so they are actually 0.302''x14, rather than 0.312''x14.

 

[SeanC]

Still looking for the ones shown in the first picture in my original post. I was able to locate them somewhere else, but I'd rather buy from somebody here on AZ.