Threaded Pool Bridge

ArizonaPete

ArizonaPete

AzB Silver Member
Silver Member
I'm not certain if this is the right forum for this. Someone gave me two brass pool bridges. I'm trying to determine the thread size. The larger hole is about 1/2" diameter and is threaded to screw onto a pool cue. The two feet are also threaded and about 1/4" diameter. Can anyone help me on this one.
 
ArizonaPete said:
I'm not certain if this is the right forum for this. Someone gave me two brass pool bridges. I'm trying to determine the thread size. The larger hole is about 1/2" diameter and is threaded to screw onto a pool cue. The two feet are also threaded and about 1/4" diameter. Can anyone help me on this one.
Click to expand...

Go to Home Depot. The have a Thread Checker.... looks like a long string of nuts and bolts.

*
 
bruppert said:
Go to Home Depot. The have a Thread Checker.... looks like a long string of nuts and bolts.

*
Click to expand...

That has to be the craziest reply I have ever read. Heres the real deal. Go to Loews, tell the manager you know me and tell him I said to direct you to the thread checker......looks like a string of nuts and bolts.:grin:
 
Hahaha, Tom, yer a nut and thats why they probably know you from hanging out in the nuts and bolts section.

Or, you could do it the easy way or the way I'd most likely do it.
Take the bridge down there and start testing nuts until you find the two that work.
Yes, I've been known to do stuff like that. I now have a thread checker so don't have to any longer.
 
Last edited:
Thanks for the suggestion guys. Lowe's was closer and I did find the thread tester (although I had to ask 5 Lowe's guys before one of them pointed me to the right aisle). I think the help at Home Depot are a lot more knowledgeable. Anyhow, I got the info and thank you once again.
 
My bad. It takes 5 Lowes employees to screw in a lightbulb where as Home Depot it only takes 2.:grin:
 
you guys

you guys are sending him nut dept. just have them page it over the intercom system head nut checker. LOL
1/2 coarse. for your brass bridge ;)
average ferrule is 13 mm = 1/2 or close enough


I know all the important stuff like a beer can is 56mm in dia.
Becauese everyday at 6 pm I get 56mm cramp in my left hand and a beer can is the perfect size to stop the cramp see abc simple:dance:
trust me 1/2 n/c .

head nut checker
MMike
 
Last edited:
You must log in or register to reply here.
Back
Top