Joint collar width

[Catalin]

Anyone knows what the typical width of the black joint collar in a classic design like this is (Tascarella, Hoppe etc )? Is it .500? Less ?

Julian

 

[bbb]

you may want to ask your question in the "ask the cuemaker" forum
https://forums.azbilliards.com/forumdisplay.php?f=22

 

[Kim Bye]

.500" is 1/2 inch Catalin, that's about 12.7mm
Most makers have their measurement, but they all hover in the .800" range, or just over 21mm

 

[Cuebuddy]

.825 -.850 on most production cues .835 is very common.

 

[RiverCity]

He is talking about the thickness of the black joint ring below the stainless collar.

Not sure what measurements those guys used, but yes, .500 is about right. When I order a cue, and supply specs, thats the measurement I use. :thumbup:


The top cue with the .750 white collar, has a .500 black ring below it.

 

[Cuebuddy]

He is talking about the thickness of the black joint ring below the stainless collar.

Not sure what measurements those guys used, but yes, .500 is about right. When I order a cue, and supply specs, thats the measurement I use. :thumbup:


The top cue with the .750 white collar, has a .500 black ring below it.

Thanks, I should know better to try and read before I have coffee
I would say .50 is about right.

Nice Bocote in your middle cue!

 

[AtLarge]

about 7/16" or 11 mm on a Brunswick Hoppe I just checked.