What type of pin is this , this is not radial I assume , Is it just a brass pin and is this a pin that is desirable. I see them in Josswest cues
What pin is this ?
- Thread starter PoolFan101
- Start date
Brass 3/8-10?
Looks like this type.
www.aliexpress.com
Looks like this type.
11.0US $ |Pool Cue Joint Pin 3/8 10 Self Aligning Screw SS, Brass, Aluminum, Copper|Snooker & Billiard Accessories| - AliExpress
Smarter Shopping, Better Living! Aliexpress.com
Last edited:
3/8-10 modified (if there are 10 threads per inch) or could be a 3/8-11modified (11 threads per inch)...
can't really tell from the image.
That's too tight to be a 10. Probably a 3/8-14. Did this photo come from a Josswest or a stock photo from the internet?
Yes , a stock photo from the net. I had seen this style pin in some of the Josswest cues and was curious as to what pin it was . Thanks
Yeah that's a 3/8-14. Similar styles are done on 3/8-10 and 3/8-11. Look up a Southwest for a common example
Looks like 3/8 10 to me . But, it doesn't matter .
10 or 12 or 14, they hit the same
10 or 12 or 14, they hit the same
Never seen a JW with one of these. Seen 5/16x14, Radial and 3/8x10 but not a modified flat-bottom pin.
Last edited:
If that's 3/8" wide, looks like there must be 10-11 threads per inch length.
pj <- don't know nothin' 'bout no pins
chgo
It's shorter than 1" and shows 10 threads
But not much shorter...
Here's a quick measure of the width/length ratio: width = 3 units, 10 threads = 7 units. Maybe 3/8-11?
pj
chgo
Last edited:
Looks like my 11
I vote for 10.625 TPI
DING DING DING
We have a WINNER!