Search results

I totally agree with all the posted comments on Chris! Not only are Orders always out quickly, but he takes the time and patience to answer my vague or dumb questions. I also want to give cudos to his family, Keisha & Israel, when Chris is away. I have placed orders and my orders have...

I really like the poor man's readout attachment. Did you make it yourself or by it already made? If self made would like to know how you did it?

Meuller's sells Porper accessories for the model b. There is an attachment for square wood available. I just measured mine and it will accomodate 2" stock. Hope this helps.

I use the one I got from chris. I had to put a couple of trim rings on the dremel before I screwed it into the holder so that my controls were on top for easier use. Works great with very little vibration with my newer dremel.

During the course of our conversation Chuck spoke highly of both Brent and Chris. Chris, Chuck shared a good story with me concerning his professional dealings with the cueman that just let me know that I was in the company of a straight-up fellow. greg

I was in Missouri this past weekend for my wife's family reunion with some time to kill. I did a search for cue makers in my area and found Chuck just a few miles down the road and gave him a call. "come on over pardner" and we'll swap some stories for a few hours. I met chuck and his 2 dogs...

thanx for the info!!

trent, what brand of epoxy are using? I chose the g5 so that I could spray a clearcoat on the cue.

thanx whammo. do heat the g5 after it is mixed or heat the bottles prior to mixing? 5 minute epoxy doesn't give a lot of working time.

In Chris's video on finishing cues he uses a torch to heat the cue cote sealerto remove air bubbles; does the G5 also need to be torched when applying as a sealer? Used G5 on an ebony forearm to seal and got little white specks in the sealer, couldn't sand it out and had to strip the forearm...

thank you for that post.

A special thanks to all veterans and the families and friends that supported them during their sevice years. I appreciate and applaud your patriotic service!!:thumbup:

Need some advice on removing a stainless joint collar. I've tried using leather and turning at high speed to heat, pliers to grip and turn with no luck. Anyone got a trade tip that I can try other than cutting the collar off? Customer wants me to replace it with cocobola. Appreciate all...

thanx for info KJ

When using cocobola for the handle should you bore and core before tapering the handle or taper first almost to final dimensions then bore and core? thanx for any input. cribbeecues

The white shows up a little after sanding, but when I put a urethan finish over it it dissappears. I have gotten into the finish in a few areas because I can see the wood. I may be losing some of the outline of the clover. Took a dental pick to try and keep the edges of the clover defined...

I need some advice on a McDermott butt cap. Had to reinstall a customers butt cap on a McD and refinish. Black with a wolf overlay. I keep losing the white on the clover when I sand the butt. Any tips on how to keep the white outline for the clover with the M inside shy of sending it back to...

Unique is offeing a stack wrap video. Haven't seen it but if it is anything like their previous dvd's it should be quite helpful.

Forgot to give phone # 910 389-7700 cribbeecues

cuesmith I am interested. PM me with info on age of lathe and any other excessories that come with it. thanx cribbeecues