Brunsiwck B26

leonkush

AzB Silver Member
Silver Member
Brunswick B26

If you are looking for something a little different and a piece
of billiard history then this cue may interest you.This is a Brunswick
B26 cue converted by Roger Corsair. The cue features in the 1920
Brunswick catalogue and came from an estate house and has been kept in
good condition over the years. The cue came as a one piece and I had
it converted using traditional joints and materials. Custom joint
protectors where also made to fit the butt and shafts.

Butt Specifications:
Width: The butt is the old fat style width and has a great balance.
Length: 28.6 inchesWeight: 15.20 ounces
Material: Ivory butt cap and joint.

Condition

The butt is dead straight and has an oiled finish. Understandably it
has developed a couple of small nicks over the past 90+ years and a
very slight separation on one of the points. I decided not to have
these filled and the butt re-finished, as Roger suggested the solvents
could lift the badge which I wanted to keep. Although if someone
preferred a re-finish, this would be a fairly inexpensive alteration.

Shaft Specifications:
The cue comes with 3 shafts, 2 Predator shafts and the original
shaft.1st and 2nd Generation Predator Shafts. Both are test hit
shafts: in mint condition, one is an original 314, the other is a 2nd
generation shaft. Both roll clinically straight alone and with the
butt. The cue is 57.5 inches long with each shaft.

The specifications are:
Tip Diameter: 12.75mm
Length: 29.2 inches
Weight: approx.. 4.15 ounces
Material: Ivory joint Collars, Predator Ferrules

Original Shaft
Looking down the shaft it appears to have developed a slight lean over
the years, although, it rolls dead straight with the butt joined
together. The cue is 57 inches long with this shaft. The shaft hits
like a dream and I decided to restore it with the butt to maintain
it's character.

The specifications are:
Tip Diameter: 13mm
Length: 28.2 inches
Weight: approx.. 4.35 ounces
Material: Ivory ferrule and joint collar
 

Attachments

  • 1.gif
    1.gif
    80.1 KB · Views: 433
  • 2.gif
    2.gif
    92.6 KB · Views: 367
  • 3.gif
    3.gif
    69.3 KB · Views: 325
  • 4.gif
    4.gif
    33.9 KB · Views: 290
  • 5.gif
    5.gif
    98.7 KB · Views: 251
Last edited:
Nice model 26.5. I've seen these in BBC catalogs as early as 1908. Are there three veneers, or four? Looks like 3 from the small pics. What is the base wood?
 
Last edited:
The base wood appears to be rosewood, I will need to check the points when i finish work, I think it has 4
 
leonkush said:
If you are looking for something a little different and a piece
of billiard history then this cue may interest you.This is a Brunswick
B26 cue converted by Roger Corsair. The cue features in the 1914
Brunswick catalogue and came from an estate house and has been kept in
good condition over the years. The cue came as a one piece and I had
it converted using traditional joints and materials. Custom joint
protectors where also made to fit the butt and shafts.

Butt Specifications:
Width: The butt is the old fat style width and has a great balance.
Length: 28.6 inchesWeight: 15.20 ounces
Material: Ivory butt cap and joint.

Condition

The butt is dead straight and has an oiled finish. Understandably it
has developed a couple of small nicks over the past 90+ years and a
very slight separation on one of the points. I decided not to have
these filled and the butt re-finished, as Roger suggested the solvents
could lift the badge which I wanted to keep. Although if someone
preferred a re-finish, this would be a fairly inexpensive alteration.

Shaft Specifications:
The cue comes with 3 shafts, 2 Predator shafts and the original
shaft.1st and 2nd Generation Predator Shafts. Both are test hit
shafts: in mint condition, one is an original 314, the other is a 2nd
generation shaft. Both roll clinically straight alone and with the
butt. The cue is 57.5 inches long with each shaft.

The specifications are:
Tip Diameter: 12.75mm
Length: 29.2 inches
Weight: approx.. 4.15 ounces
Material: Ivory joint Collars, Predator Ferrules

Original Shaft
Looking down the shaft it appears to have developed a slight lean over
the years, although, it rolls dead straight with the butt joined
together. The cue is 57 inches long with this shaft. The shaft hits
like a dream and I decided to restore it with the butt to maintain
it's character.

The specifications are:
Tip Diameter: 13mm
Length: 28.2 inches
Weight: approx.. 4.35 ounces
Material: Ivory ferrule and joint collar

Summary
I am asking $1200 for the cue..

Did Rodger sign the cue or is there a Letter of Authenticity from Mr.Corsair?

Just to add a little information, these were certainly made before 1910, and they were made thru the 1930's. However, the cue pictured was made in the Mid-1920's not during the 1914 time frame according to the Brunswick lable that is on that cue.

Thanks for sharing and it is a nice cue.

Craig
 
There isn't a signed letter, but Roger has done a lot of work for me in the past and a letter would not be difficult to obtain. Nor would a signiture if the cue was sent to Roger.

I will update my description to 1920. I have just invested in a new Tad cue and will be sorry to let this one go but there are only so many cues that someone can have at one time!

Thanks

Leon

manwon said:
Did Rodger sign the cue or is there a Letter of Authenticity from Mr.Corsair?

Just to add a little information, these were certainly made before 1910, and they were made thru the 1930's. However, the cue pictured was made in the Mid-1920's not during the 1914 time frame according to the Brunswick lable that is on that cue.

Thanks for sharing and it is a nice cue.

Craig
 
leonkush said:
There isn't a signed letter, but Roger has done a lot of work for me in the past and a letter would not be difficult to obtain. Nor would a signiture if the cue was sent to Roger.

I will update my description to 1920. I have just invested in a new Tad cue and will be sorry to let this one go but there are only so many cues that someone can have at one time!

Thanks

Leon

Leon, the letter of authinticity would help you a great deal with the sale of this cue. Roger, is well know and his and his fathers work is well respected, if you have access to him, I would get the letter. That way the buyer will have proof if they choose to sell the cue some day. Most likely they will not have access to Roger.

Have a great night!!!!!
 
Back
Top