Cue & Case Collection for Sale

johnf_34

johnf_34

JF - Fitz Cues!!
Silver Member
It's not much, but I'm looking to sell off most of my cues and cases. I love my cues and cases, but I also really love classic cars. I would be interested in selling them all separately or as a group, except for the three cues marked "NFS". I would also be interested in trading for some classic muscle cars(project or restored), but don't expect too many offers on here for those:grin: . I will consider all offers of cash, trade, cars, or any combination of those three.

It will take me awhile to get the specs ready for all of the cues and will be glad to add them as soon as I can. I can also take more pictures if needed.

Add 3% if using paypal.

CUES (L to R):
Willeecue J/B (NFS),

James Hanshew 1of1 ($300 shipped) - Ebony/Birdseye/PH, 3/8x10, 58", 19.58oz, B:29 1/8", 15.95oz, S:28 7/8", 3.63oz, 12.46mm, buckhorn ferrule & rings
One small chip in the finish on the butt cap.

Carolina Cue (NFS),

Carolina Cue (SOLD)

Zylr ($1200) - Bocote & Curly Maple, 3/8x11, 58", 18.14-18.19oz, B:29", 14.56oz, S1:29", 3.58oz, 12.74mm, Buckhorn, S2:29", 3.63oz, 12.82mm, Buckhorn
There are three chips in the finish on the butt cap, the buckhorn is not chipped though.

Kornele ($900 shipped) - 8pt Ebony & Birdseye, 4hi/4low all with red, red, black veneers, 3/8x10, 58", 18.16-18.83oz, B:29", 14.66oz, S1:29", 4.17oz, 12.93mm, S2:29", 3.5oz, 12.81mm, Ivory ferrules, Ivory joint, Ivory recut points, Ivory inlays, Ivory rings, non-ivory buttcap
The butt cap is cracked, there is a chip in the finish on the butt sleeve, a dent in the forearm that doesn't break the finish, and the shaft collar on S1 is chipping off.

Rauenzahn ($2250 shipped) - 4 pt Ebony into Birdseye w/maple, green, blue, black veneers. Blue/green/blue Szamboti rings at joint/shafts, radial pin, 59 1/2", 19.31-19.37oz, B:29 3/4", 15.16oz, S1:29 3/4", 4.21oz, 12.94mm, S2:29 3/4", 4.15oz, 12.88mm, Ivory ferrules, Ivory joint, Ivory inlays, Ivory rings, veneered boxes in butt sleeve, non-ivory buttcap.
New cue with maybe 10 racks played with one shaft!

Barber ($800 shipped) - 4pt Purpleheart into Birdseye w/curly handle, white & black veneers, 3/8x10, 58", 17.5-17.55oz, B:28 7/8", 13.81oz, S1:29 1/4", 3.69oz, 12.56mm, Ivory ferrule, S2:29 1/4", 3.74oz, 13.10mm, LBM ferrule, Ivory joint, Ivory Buttcap, Ivory rings.
One chip in bottom of butt cap and I crack in finish on forearm.
This cue is on the Cover of American Cueist and I have that issue which will go with the cue and it's in excellent shape!

Hunter Classics Titlist ($1600 shipped) - Wrapless Titlist conversion, 58 1/4", 19.48-19.51oz, B:29 1/8", 15.41oz, S1:29 1/8", 4.10oz, 12.6mm, S2:29 1/8", 4.07oz, 13.04mm, Ivory ferrules, Ivory sleeved joint, Ivory inlays, Ivory hoppe ring. Most vibrant veneers I've seen and Wes matched the ringwork perfectly! There is two chips in the finish in the butt sleeve, but the cue will probably need a refinish. One ferrule is bell-shaped outwards toward the tip and should probably be smoothed out.

Steve Klein Titlist 1of1 ($900 shipped) - Titlist Conversion, brass radial pin, 58", 19.66oz, B:29", 15.71oz, S:29", 3.95oz, 13.12mm, Melamine ferrule, phenolic flat faced joint, phenolic butt cap, magenta barbells with MOP dots. This cue is new and signed Steve Klein 1of1, but the bottom of the points were not straight and so the inlays aren't completely aligned with the bottom of the points because of that.

Toeboy Titlist (NFS),

Brunswick 26 1/2 cue (Saved for Conversion)
Brunswick 26 1/2 cue (Saved for Conversion)
Titlist cue (Saved for Conversion)

CASES
Justis 2x4 ($425 shipped)
It's George 3x6 Black ($450 shipped)
It's George 3x6 Brown ($450 shipped)
Instroke Artisan 3x5 ($150 shipped)
ProSeries 4x8 (SOLD)


DSC01804.jpg

DSC01788.jpg

DSC01789.jpg

DSC01790.jpg

DSC01791.jpg

DSC01835.jpg
 
Last edited:
rack'em zach'em said:
???

What's up John? You quitting?
Click to expand...

Nope, not quitting. I've been pretty much set on my playing cue for awhile, so I don't really use the other cues. Instead of letting the cues sit in cases in my pool room, I would rather have a nice classic GTO or Mustang or something in my garage for a fun weekend car. I have been a classic car and muscle car nut as long as I have loved pool....cues have just been a little easier to acquire and so I'm going to see what happens!
 
Thanks to all that have inquired so far! All PMs have been responded to. As for specs, I have weighed and measured all of the cues and will be posting specs first thing in the morning at the top of this thread. I appreciate the patience! Thanks!
 
I apologize for not getting the specs sooner as planned. I was not able to get on AZ at work today. The Specs have been added to the first post.

Troy, yes the Klein has the brown Lizard embossed leather wrap that is perfect!
 
Just a little bump. I will be measuring the 1-piece titlists/brunswick 26 1/2 cues to determine how conversion worthy they are. I will post those measurements when I get a chance.

Also, keep in mind that I like cash offers, but still don't mind some cue trade offers as well.
 
those wrapless titlist are sooo swweeeeettt!! im trying to gater funds(xmas....bah humbung)to order one...nice!
 
Nice Hunter Titlist

That cue always has me scrapping around for $$$. Beautiful cues, and a great guy to deal with. No problems dealing with John.

Michael
 
Thanks Michael! It is always good to talk to you and do business as well.

Just a bump back to the top after a couple days! Specs for the titlist/26.5 cues have been added as well!

Still interested in trades!! I've had some offers, but feel free to send more!
 
Last edited:
You must log in or register to reply here.
Back
Top