Early Runde Era Schon R12 Amazing condition

calibration

calibration

AzB Silver Member
Silver Member
THIS SCHON R12 IS JUST AMAZING, IT HAS BEEN STORED WITHOUT PLAY FOR ALMOST 20 YEARS. OF COURSE IT HAS THE RAZOR SHARP RUNDE POINTS WITH HIGHLY COVETED RED AND STEEL BLUE VENEERS. WRAP HAS SOME DISCOLORING BUT OTHERWISE IN FANTASTIC CONDITION. NO EVIDENCE OF RING POPS EXCEPT ON THE LOWER WRAP ONES ARE EVER EVER SO SLIGHTY RAISED, I MEAN EVER SO. I'LL LET THE PICTURES DO THE REST OF THE TALKING.

PILOTED 5/16 14 STEEL JOINT

BUTT WEIGHT -15.3 OUNCES AT 29" LONG AND IS 1.28" IN DIAMETER AT THE BUTT CAP

The shafts are from 1993. I love these era shafts, some guys say they were made from an older stock of wood

SHAFT 1 - 29" NON-IVORY FERRULED 12.47mm/3.78 OUNCES, WITH ORIGINAL FACTORY INSTALLED FIBER PAD AND SCHON TIP. KAMUI LAYERED TIP IS SHOWN IN PICTURE SORRY I REINSTALLED THE ORIGINAL TODAY. THIS SHAFT HAS HAD SOME PLAY

SHAFT 2 - 29" NON-IVORY FERRULED 13.08mm/3.95 OUNCES, WITH ORIGINAL FACTORY INSTALLED FIBER PAD AND SCHON TIP. NEVER REALLY PLAYED

CUE IS IN FANTASTIC CONDITION ALL STRAIGHT TOGETHER AND APART

I AM PRICING THIS CUE AT AN AMAZING $ CUE IS SOLD. PLEASE NO TRADE OFFERS
 

Attachments

  • 2011-01-30 11.18.37.jpg
    2011-01-30 11.18.37.jpg
    98.6 KB · Views: 2,851
  • 2011-01-30 11.13.56.jpg
    2011-01-30 11.13.56.jpg
    98.5 KB · Views: 2,654
  • 2011-01-30 11.13.04.jpg
    2011-01-30 11.13.04.jpg
    92.8 KB · Views: 2,847
  • 2011-01-30 11.19.27.jpg
    2011-01-30 11.19.27.jpg
    97.8 KB · Views: 2,501
  • 2011-01-30 11.14.50.jpg
    2011-01-30 11.14.50.jpg
    96.8 KB · Views: 2,501
Last edited:
I think azer ''deanoc'' was looking for an old Runde style cue. Maybe try sending him a PM.
Good looking cue you got there & GL with your sale.
Jeff
 
Man I want that cue... I bet it hits a TON!!!... This is in my opinion the prettiest Schon ever made very classy and elegant yet it still has that old school look and feel!!! Good luck with your sale.... :grin:
 
This is certainly one of the best examples I have seen,I may be showing my ignorance,but is this cue one of those commonly referred to as a Runde.And a second like question,what does the metal vs stitch ring tell us

Thank you for referring him to me,I am looking for some sharp point cues,in fact I bought 6 of them in the last 2 weeks,but most are Runde cues.

If I were an az person wanting that 1 perfect Schon classic,I would look no further than this one.

best wishes to buyer and seller on this prime example

Dean
 
deanoc said:
This is certainly one of the best examples I have seen,I may be showing my ignorance,but is this cue one of those commonly referred to as a Runde.And a second like question,what does the metal vs stitch ring tell us

Thank you for referring him to me,I am looking for some sharp point cues,in fact I bought 6 of them in the last 2 weeks,but most are Runde cues.

If I were an az person wanting that 1 perfect Schon classic,I would look no further than this one.

best wishes to buyer and seller on this prime example

Dean
Click to expand...


To answer your question and the nickel vs stitched ring at the time nickel was a "upgrade" it is also rare to see to different color veneers on a r12.
This is a fantastic cue for sale and shouldn't take long to sell. Good luck with your sale!
 
The nickel ring was an upgrade pre 85 IIRC and standard after. The shafts are 1993 shafts.
 
Thanks for the comments guys

Thanks for the comments guys. I have corrected the description to reflect the shafts not being from the original era, sorry about that, thanks for the info PDX.
 
Last edited:
R12

If I were in the market for another R12 I would be all over this one. Also notice the boxes on the butt sleve are not mitered. Makes it a whole different look up close and personal. Good luck with the sale!
 
I hope this cue is sold by Sat. I so so want this cue. An I have too many cues. Man I have to get a life. This cue is king KONG. :eek:
 
Jam Up Cue

offering a cue at a fantastic price- the deadness on az is horrifying- just a bump to the top where it belongs, Most people are looking for deals and this is a deal, there are many options for shafts for this cue. mark
 
calibration said:
THIS SCHON R12 IS JUST AMAZING, IT HAS BEEN STORED WITHOUT PLAY FOR ALMOST 20 YEARS. OF COURSE IT HAS THE RAZOR SHARP RUNDE POINTS WITH HIGHLY COVETED RED AND STEEL BLUE VENEERS. WRAP HAS SOME DISCOLORING BUT OTHERWISE IN FANTASTIC CONDITION. NO EVIDENCE OF RING POPS EXCEPT ON THE LOWER WRAP ONES ARE EVER EVER SO SLIGHTY RAISED, I MEAN EVER SO. I'LL LET THE PICTURES DO THE REST OF THE TALKING.

PILOTED 5/16 14 STEEL JOINT

BUTT WEIGHT -15.3 OUNCES AT 29" LONG AND IS 1.28" IN DIAMETER AT THE BUTT CAP

SHAFT 1 - 29" IVORY FERRULED 12.47mm/3.78 OUNCES, KAMUI LAYERED TIP. THIS SHAFT HAS HAD SOME PLAY

SHAFT 2 - 29" IVORY FERRULED 13.08mm/3.95 OUNCES, WITH ORIGINAL FACTORY INSTALLED FIBER PAD AND SCHON TIP. NEVER REALLY PLAYED

CUE IS IN FANTASTIC CONDITION ALL STRAIGHT TOGETHER AND APART

I AM PRICING THIS CUE AT AN AMAZING $1250 O.B.O. PLUS SHIPPING. PLEASE NO TRADE OFFERS
Click to expand...



Are the shafts original to the cue?
 
manwon said:
Are the shafts original to the cue?
Click to expand...

No, the shafts are from 1993. I love the old shafts but I really like the 93s too.
Does anyone know if they were made from an older stock of wood? Sure feels like it.
 
Thanks again for the great comments

Appreciate all your guys positive comments. yes she's a rare beaut. Have received quite a few PM's from potential wannabee buyers put nobodys pulled the trigger. Need to sell kinda fast.
 
Thank you for the R12

All those that passed this cue up, missed out.
The cue is a Monster. It was described to a tee as far as condition.
Cal is the best to deal with.
I would buy my next Wife from him.

Thank you Cal,
Jeff
 
You must log in or register to reply here.
Back
Top