F.S. work station

tsp&b

tsp&b

Well-known member
Silver Member
For Sale: Just a simple-basic little work station. Shaft cleaning & sanding, wrap station or whatever else you want to do with it. It has a 48 inch bed, Headstock with .593 bore, 3 jaw self centering chuck opens to approx 1.38 inch, motor is approx. 1/10 horsepower 110 vac, variable speed with two controls, one foot control and one hand control. Drilling tailstock with 1/2 inch jacobs chuck. Mounted and ready to go.... $318.00 + S&H. If you have any questions please just let me know. Send me a PM here or email me at jtoddshultz@yahoo.com Thanks a Million!! Todd

work station.jpg
 
Last edited:
The little motor is rated at 6,000 rpms (no laod i'm sure). The gear ratio is approx 4 to 1 so the headstock would be turning at about 1,250 to 1,500 rpms max (no load).
 
A couple of folks have asked about getting a larger motor. I can replace the motor and controls shown in the original post with the 1/2 hp reversable rotation, full variable speed motor which also includes the plug-in foot control. $473.00 + S&H Total.
 
Last edited:
cueworkshop said:
Nice and Simple....Do you have a rear steady rest for doing tips?
Click to expand...

I don't think this machine has the ability to fit the cross slide, but no problem for him to put a steady rest with a 3 or 4 jaw chuck on it. Todd's got some great machines, great ideas and can pretty much put together something to meet your needs! Just send him a PM! Great guy to do business with and the machines work great and the parts are the same as the others- Taig!

Zim
 
is that not the same thing that everybody and his brother is selling. They all buy Taig off the shelf stuff and that act like they are inventors. It's very fuuny.
 
cueboy22 said:
is that not the same thing that everybody and his brother is selling. They all buy Taig off the shelf stuff and that act like they are inventors. It's very fuuny.
Click to expand...

yah, but this guy actually takes care of business and is more than welcome here imo...also, doesnt act like an inventor, and has some non taig parts that he designs and builds for folks.

FYI, you can't even buy a stock foot long taig lathe for what he is selling this one for, so he is offering more than fair pricing on his stuff. Hopefully nobody will see these last two posts as the OP doesnt deserve any negativity
 
cueboy22 said:
is that not the same thing that everybody and his brother is selling. They all buy Taig off the shelf stuff and that act like they are inventors. It's very fuuny.
Click to expand...

Just to let you know the only stock taig parts are the head stock, 3 jaw chuck and the tail stock. The dove tail bed he has to have made because taig wont sell the extruded beds to anyone but Chris Hightower. Tods not trying to reinvent the wheel he is just offering a good product at a very fair price IMHO.
 
cueworkshop said:
Nice and Simple....Do you have a rear steady rest for doing tips?
Click to expand...

I suppose a person could do tips free hand. but that is not what this rig is for. You may want to look at something like one of these.

Basic "beginner"... Good http://forums.azbilliards.com/showthread.php?t=173278

Basic with 4 ft bed... Better http://forums.azbilliards.com/showthread.php?t=182197

Professional... Best http://forums.azbilliards.com/showthread.php?t=175012


Thanks a Million!!
Todd
 
w/s

Thanks Todd they all look great......(i'm looking at a mini lathe)I will get with you later.need something for a same tournament thnxs again Barry D.
 
just last week i bought a "Professional" model from todd, and it is just that "very Professional"...todd is great to deal with and does what he says he is going to do..i also have a porper model b i bought new about 10 years ago...and todds machine is worth every bit of what he is charging for it...but most important is that you will be happy with todds business practice...joe
cueboy22 said:
is that not the same thing that everybody and his brother is selling. They all buy Taig off the shelf stuff and that act like they are inventors. It's very fuuny.
Click to expand...
 
Felt the need to put in my $.02. I have dealt with Todd on 2 occasions and both were flawless and effortless transactions. Last item, I sent Paypal on Friday and my item was in my hands Monday morning before 9:00 in perfect condition. What more could I ask for?
Thanks a million Todd :thumbup:
 
You must log in or register to reply here.
Back
Top