I'm a 30 year retiree of the U.S. Postal Service, and I've seen a lot. Yes, parcels can get mishandled; something not entirely unique with using the USPS as your carrier. These points apply to any carrier you might choose.
I'll be prepping a cue for shipping shortly. My packing method is certainly not the only way to do things. I detail my packing method below, but the primary reason for this thread's relevance is this.
Clearly and boldly mark the outer carton on each side, and the ends as well, with the word "GLASS". The airport baggage handlers, semi tractor trailer loading crews, and anyone else handling your cue along to its final destination haven't a clue that it's not glass.
Contrary to the widely held belief that government employees cannot read, most actually can to a limited degree, well, except for the supervisors. This is close to a sure fire way to get your parcel thru the system without any catastrophic damage inflicted. Boldly applied with a RED Sharpie, I haven't had it let me down yet. Yeah, there's always an exception, but I've rarely seen it fail.
Lightly immobilize the cue parts in a nearly bulletproof and indestructible heavy duty tube; enough so it won't move within the tube, yet so as to not put any unnecessary lateral pressure on the cue. I weigh 190 pounds and I can stand on this tube without it collapsing. The tube provides a real physical barrier for the actual cue against assorted impacts via conveyor belts, tossing, etc.
Enclose your barrier tube in a cardboard carton. Using bubble wrap, cushion the tube on all points of its circumference; not forgetting a bubble wrap cushion on each end of the carton. The point here is to use the bubble wrap as a material to perform as a shock absorber. Your cue has already been immobilized in the tube, so now the tube is also cushioned against any shock or movement inside the carton.
Just thought I'd tho' that out there... :shrug:
I'll be prepping a cue for shipping shortly. My packing method is certainly not the only way to do things. I detail my packing method below, but the primary reason for this thread's relevance is this.
Clearly and boldly mark the outer carton on each side, and the ends as well, with the word "GLASS". The airport baggage handlers, semi tractor trailer loading crews, and anyone else handling your cue along to its final destination haven't a clue that it's not glass.
Contrary to the widely held belief that government employees cannot read, most actually can to a limited degree, well, except for the supervisors. This is close to a sure fire way to get your parcel thru the system without any catastrophic damage inflicted. Boldly applied with a RED Sharpie, I haven't had it let me down yet. Yeah, there's always an exception, but I've rarely seen it fail.
Lightly immobilize the cue parts in a nearly bulletproof and indestructible heavy duty tube; enough so it won't move within the tube, yet so as to not put any unnecessary lateral pressure on the cue. I weigh 190 pounds and I can stand on this tube without it collapsing. The tube provides a real physical barrier for the actual cue against assorted impacts via conveyor belts, tossing, etc.
Enclose your barrier tube in a cardboard carton. Using bubble wrap, cushion the tube on all points of its circumference; not forgetting a bubble wrap cushion on each end of the carton. The point here is to use the bubble wrap as a material to perform as a shock absorber. Your cue has already been immobilized in the tube, so now the tube is also cushioned against any shock or movement inside the carton.
Just thought I'd tho' that out there... :shrug:
