Guido's new Joint Pins

[ceebee]

Guido Orlandi has had some new joint pins made up... these babies are as straight as can be had.

They are 3.481 long, .372 in diameter, they are 303 Stainless Steel.

Front & Rear root depth concentricity is .0003

They are concentric with each other by .0005

Length of center section is 1.120

They are $7.50 each

 

[JoeyInCali]

Are these imported radials ?

 

[RBC]

Are these imported radials ?

Joey

They appear to be a pin he had machined.

They look to be made to the same thread form as the UniLoc brand Radial pin.


Royce

 

[whammo57]

Rediculous

Sent from my LG-D850 using Tapatalk

 

[JoeyInCali]

Joey

They appear to be a pin he had machined.

They look to be made to the same thread form as the UniLoc brand Radial pin.


Royce

Ah, thanks Royce.

 

[ceebee]

Orlandi Pins

Are these imported radials ?

Yes, these pins are made in Arizona. I did add some more info to the original post.

 

[ceebee]

Joey

They appear to be a pin he had machined.

They look to be made to the same thread form as the UniLoc brand Radial pin.


Royce

Yes Royce, they are similar to that Uniloc pin. They are made to Guido's specs.

 

[Canadian cue]

Do you sell the tap to make the mating thread? One is kinda useless without the other IMO.

 

[ceebee]

The taps can be obtained thru Atlas Billiards

 

[RBC]

Charlie

If they will work with the normal Radial™ tap, then the profile is the same as what we know as Radial™.

I'm not sure what specs Guido might have changed, but the important ones will still be the same.

Royce