how to keep a shaft from siezeing up to the butt

[GlobalGamer]

I have a Break cue that i constantly have problems with the shaft siezeing(sp?) up to the butt. It can get so bad that i have to have another person grab the shaft side and break it loose. The cue is a wood to wood joint style with a stainless pin(3/8X10), no insert. Any tips/tricks of the trade to keep this from happening?

Thanks

 

[nineballsafety8]

I have a Break cue that i constantly have problems with the shaft siezeing(sp?) up to the butt. It can get so bad that i have to have another person grab the shaft side and break it loose. The cue is a wood to wood joint style with a stainless pin(3/8X10), no insert. Any tips/tricks of the trade to keep this from happening?

Thanks

Graphite powder

Can find it at any hobby store

Sent from my LG-P930 using Tapatalk 2

 

[Mase]

A bit of wax on the threads of the pin should help it turn easier and may help with the seizing.

 

[whammo57]

I am guessing it's a unilock...........

Kim

 

[akaminski]

2nd the carnauba wax on the threads.... Just a small amount should do the trick

 

[measureman]

how to keep a shaft from siezeing up to the butt -
I was going to comment on this but then I remembered it's Sunday.
Just let it go Bruce.

 

[GBCues]

3rd vote for wax - NO not for your issue MeasureMan!!
:grin-square:
Gary

 

[the breed]

http://www.ebay.com/itm/250934408532?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649