its seen better days....

I am so glad you are going to restore it. I love Palmers and can't wait to see the pics when you are done.

Oh hell, just send it to me when you are done.:D :D :D
 
As it sits, both shafts are cracked/warpedand the butt could shoot around corners. :eek:
 
I had an old Palmer (I bought it second hand in the 70's) refinished not too long ago. I looks great now, but the only problem is that, since the butt cap was chipped to hell, it had to be replaced and now there's nothing to identify the cue as a Palmer. BTW, there were no inlays, just a solid BE Maple Butt.
 
CaptainHook said:
Dang, with that much damage can you even rebuild it? :o
Click to expand...

Of course I can rebuild it. Most of the warp is in the handle. There is a little in the forearm but not enough to cause any problems. The thick rings in the butt sleeve are supposed to be white pearl and I'll need to replace the GNS collar.

This is the stuff I love to do. I always prefer the challenge of rebuilding to building.
 
ratcues said:
Of course I can rebuild it. Most of the warp is in the handle. There is a little in the forearm but not enough to cause any problems. The thick rings in the butt sleeve are supposed to be white pearl and I'll need to replace the GNS collar.

This is the stuff I love to do. I always prefer the challenge of rebuilding to building.
Click to expand...


Ok, send it to me when it is done, I will give it a good home.:D
 
CaptainHook said:
Ok, send it to me when it is done, I will give it a good home.:D
Click to expand...

Sorry, its not mine. Somebody is paying good money to have all of this work done.
 
ratcues said:
Sorry, its not mine. Somebody is paying good money to have all of this work done.
Click to expand...

Oh...my bad. I thought you found it and were restoring it for yourself.:)

I still want to see the pics when it is done.
:D
 
ratcues said:
Take a look at this old Palmer. It looks a little rough so I'm going to rebuild it and will post pics as I go.
Click to expand...

This is an early Palmer. I would estimate 1966 -1967. The forearm was made in Palmer's shop and is almost a copy of the forearm Burton Spain was making at the time, but with the handle attached with a "V" splice. The forearm will be a real beauty when it's re-done.

Concerning the unusual butt sleeve configuration on this cue, Palmer did use "marblette" for a very short while, but cutting it and sanding stunk up the shop so bad, they quit using it. I don't know if all of the the butt sleeve components are original to this cue.

This cue is going to clean up beautifully - wait and see. Those veneers and inlays are going to pop right out at you.

Chris
 
Last edited:
Here's a pic of the butt cap disassembled. All of the parts seem to be original. Notice the weight pin that was hidden inside of the sleeved and was capped with wood. I made a new handle piece today and will have pics of it next week.
 
Last edited:
TATE said:
This is an early Palmer. I would estimate 1966 -1967. The forearm was made in Palmer's shop and is almost a copy of the forearm Burton Spain was making at the time, but with the handle attached with a "V" splice. The forearm will be a real beauty when it's re-done.

Concerning the unusual butt sleeve configuration on this cue, Palmer did use "marblette" for a very short while, but cutting it and sanding stunk up the shop so bad, they quit using it. I don't know if all of the the butt sleeve components are original to this cue.

This cue is going to clean up beautifully - wait and see. Those veneers and inlays are going to pop right out at you.

Chris
Click to expand...
I was going to ask if it was one of Burton's blanks when I saw the butterfly splice below the points. Did Palmer ever use any of his blanks?
 
ratcues said:
Here's a pic of the butt cap disassembled. All of the parts seem to be original. Notice the weight pin that was hidden inside of the sleeved and was capped with wood. I made a new handle piece today and will have pics of it next week.
Click to expand...

Thank you for the update.:)
 
Here is the Palmer with the old handle removed and a new handle made, with the ebony splice. I will also rejoin the two pieces using a threaded ebony dowel (already installed) to maintain the feel and balance, or at least as much as I can. I also had to core out a few inches into the forearm because the original ebony was cracking and I didn't want it to continue.
 

Attachments

  • palmA1.JPG
    palmA1.JPG
    99.2 KB · Views: 159
Shawn Armstrong said:
I was going to ask if it was one of Burton's blanks when I saw the butterfly splice below the points. Did Palmer ever use any of his blanks?
Click to expand...

They sure did, as did Frank Paradise and Balabushka

Burt was the first(?) to build and sell front blanks and full length butts.

Said he only did it because the Hoppe/Titlist had declined so much
in quality.

Dale Pierce
 
You must log in or register to reply here.
Back
Top