long or short pivot point?

conetip

AzB Silver Member
Silver Member
What are the advantages/disadvantages of a cue with a long pivot point?
Is a long pivot point in a cue a desirable thing?
If you have a cue shaft with a really long pivot point,what do you do to shorten that pivot point?
Thanks for any replies.
Neil
 
What are the advantages/disadvantages of a cue with a long pivot point?
"cue with a long natural pivot length" = "low-squirt cue" = "LD (low CB deflection) shaft"

Both advantages and disadvantages of low-squirt shafts are listed here:

Is a long pivot point in a cue a desirable thing?
Yes, for the people who like LD shafts. And based on how successful Predator and other LD shaft suppliers have been, many people like LD shafts.

If you have a cue shaft with a really long pivot point,what do you do to shorten that pivot point?
I can't imagine why you would want to do this, but this is easy: Do the opposite of everything that is done to make a shaft low-squirt. For example, don't turn it down to such a small diameter, use a heavier ferrule, and/or insert a heavy core in the end of the shaft.

Regards,
Dave
 
What are the advantages/disadvantages of a cue with a long pivot point?
Is a long pivot point in a cue a desirable thing?

Long pivot, very likely a Low squirt on cb. very desirable for most players.

If you have a cue shaft with a really long pivot point,what do you do to shorten that pivot point?
Thanks for any replies.
Neil
I don't think you can, unless you can increase the shaft size or increase weight in the ferrule area.
 
Thanks for the replies.
I can easily adjust the weight to the tip end by making th etip holders out of heavier materials. I will now look into that and the effects it has on the overall hit of the cue.
Glad it seems I might be on the right track.
 
Well I learned a new term. I have always used a form of fronthand english, but never referred to the pivot point. It was always referred to as the BRIDGE POINT. THANKS...JER
 
Well I learned a new term. I have always used a form of fronthand english, but never referred to the pivot point. It was always referred to as the BRIDGE POINT. THANKS...JER

its like anything else...terminology screws with you at times.

When i was up in colorado they asked me for a tubing valve......so i looked for a dam hour. Untill an old man asked me and I said what I was searching for.....he says oh thats just a 2 way selector! That i knew lol but I still scratched my head for a hour lol.

-The Grey One
 
You can get way too involved in the process of things at times, too.
Some of the best players I've ever known, would laugh in your face if you asked them about half of that stuff.... They have no clue whatsoever, and play on pure instinct and muscle memory. No aiming systems, no thought about deflection, BHE, etc.
 
I used the 11.6 tip shaft last night. I was amazed at making long shots that I should have used a bridge for.I was bridgeing at 21-22 inches for the long shots ,the few that I did,made every shot.
 
I used the 11.6 tip shaft last night. I was amazed at making long shots that I should have used a bridge for.I was bridgeing at 21-22 inches for the long shots ,the few that I did,made every shot.

Maybe it was something that you eat. :D
 
Back
Top