For your consideration is a very nice Mike Kinder cue. this cue was made in the Kinder/Tull shop at Shooter's Billiards around 1991. I have hit balls with this cue and it is very solid. The cue was made at the shop in Shooter's when Mike was primarily making cues by himself, thus the MWK labling as opposed to the earlier cues that were called Tunder cues (Tull/Kinder). Dan was still heavily involved but was trying to help Mike establish himself as a cue maker. This cue is available for $SOLD shipped via FEDEX 2nd day anywhere in the Lower 48. No trades please, this is another that Dan Tull is thinning from the herd.
Description:
Build Date: Between 1990 and 1992
Forearm: Four ebony points into birdseye maple.
Points: Ebony with Maple, Orange, Red, and Ebony veneers.
Wrap: Incredibly clean and smooth green/white spec irish linen, looks new still.
Butt: Ebony with Delrin butt cap with MWK Logo (Mike W. Kinder). Also, if the new owner wants I can put a brown bumper on the cue to give it an even older school look
Joint: 5/16-14 piloted steel with silver rings.
Specifications:
Butt: - Very good shape zero dings and scratches, there is one spot at the bottom of one of points that loos like a smudge and will probably buff out.
Joint: 5/16-14 piloted steel with silver rings.
Joint Width .840"
Top of wrap: 1.03"
Bottom of wrap: 1.19"
Butt 15.4oz with a bolt
Shaft 1 - 13.0mm 4.1oz Aegis Ferrule Triangle Tip
Shaft 2 - 13.1mm 4.1oz Aegis Ferrule Triangle Tip and a hairline crack at the base of the ferrule, at this point the crack is not all the way through the ferrule and still hits solid.
Butt Pictures, shafts in next post:
Description:
Build Date: Between 1990 and 1992
Forearm: Four ebony points into birdseye maple.
Points: Ebony with Maple, Orange, Red, and Ebony veneers.
Wrap: Incredibly clean and smooth green/white spec irish linen, looks new still.
Butt: Ebony with Delrin butt cap with MWK Logo (Mike W. Kinder). Also, if the new owner wants I can put a brown bumper on the cue to give it an even older school look
Joint: 5/16-14 piloted steel with silver rings.
Specifications:
Butt: - Very good shape zero dings and scratches, there is one spot at the bottom of one of points that loos like a smudge and will probably buff out.
Joint: 5/16-14 piloted steel with silver rings.
Joint Width .840"
Top of wrap: 1.03"
Bottom of wrap: 1.19"
Butt 15.4oz with a bolt
Shaft 1 - 13.0mm 4.1oz Aegis Ferrule Triangle Tip
Shaft 2 - 13.1mm 4.1oz Aegis Ferrule Triangle Tip and a hairline crack at the base of the ferrule, at this point the crack is not all the way through the ferrule and still hits solid.
Butt Pictures, shafts in next post:
Attachments
Last edited: