NEW Bulletproof Synthetic Playing Tips.

[Nealgl1985]

Even the break tips play great. I liked the hit of the red medium, but I noticed it was harder to get good English so ill be trying the green hard in the next week. I've played at least 15 racks with my bk rush w/ the break tip and the tip plays great. I can chalk up once a rack and be good that's how well the break tips hold chalk.

 

[Mensabum]

What brand of glue is the 2P-10?

I started using the 2P-10 several months ago with activator spray. Haven't had any issues with tips coming off since. Cures out so fast that way you can work it in 5 mins!!!
Just spray one surface and apply glue to the other. Press together for 30 seconds, let sit for a few minutes and shape. This was recommended to me by Robert @ Bulletproof.
Got my vote all day.

 

[Mensabum]

Can these tips be cut by hand? I don't have a lathe all my tips i've done by hand with a knife

Absolutely. Time involved depends on tip hardness. I do all mine by hand. Always have.

 

[Mensabum]

Super happy with these tips, and staff at Bulletproof. I tried a Medium, but after only a week, I missed that green hard unit.

Anyone that has hit with the green are impressed with the performance....most however do not like the hardness. I had the same initial reaction. Change is possible even at 65.

View attachment 810224

View attachment 810225
Revo w Recoil.
Rhino w factory tip (for now lol)
Still living on the edge....no silencer pad.

I put green on all 3 playing shafts and the clear on my breaker. These will outlast me. I scuff mine with that shaper looks kinda like a tuning fork. Quarter/dime with round sandpaper discs. Run it over that hard tip often and I haven't seen reduction in size yet!! Masters chalk after every shot. Part of the ol' PSR, dontchaknow.

 

[Mensabum]

Have been thoroughly enjoying playing with the green guy on a no-name CF shaft. One of the mediums popped off a bit back, so I tried Loctite Super Glue Power Flex Control for the hell of it (I normally use their Gel Control) and it's holding well

Perhaps these tips don't generate as much english as finer counterparts, but as a compulsive shaping and scuffing junkie who tends to hit the ball too hard anyways, the benefits of the resilient shape and consistent striking has me happy.

It's pretty damn difficult to scuff these well eh? I was trying out a pumice stone and some other weird objects. Settled on taking a tapper tool and gripping it quite firmly in the hand like a hammer and performing firm, short, and directionally kaleidoscopic scrapes amongst the dome.

Cheers. Waiting for the "Extra Hard" boys. I'll pay extra if it's purple

Put me on the bus!! I'd hit w a rock if I could get it to hold chalk!!
No probs getting all the spin I want w green. Nice consistent hit, even when getting way out there, like over a rail or extreme spin, grabs the cue ball well. Doesn't slip or miscue like other tips when they glaze over. I realize much of this has to do with your stroke, but these are some damn fine tips, irregardless. Just my 2¢.

 

[RickLafayette]

I bought the pick style scuffer from you and the picks work OK (on my medium red) but it takes a while to get the surface where I like it. I'll be watching for your dedicated scuffer and get one as soon as it's available.

I was going to try the green again but I'm so happy with the red medium I'm even using it to break 8 and 9 ball racks. I temporarily retired my BK Rush.
My shop is a little too cold right now to work with my lathe but as soon as it warms up I think I'm going to try the grey prototype. (Shhhhhh)

I think I'm sticking with the red medium. I haven't lost a match yet. I got a brand new Last 4 Ever tip tool (my other was old and worn) and have been rolling it over the tip while pressing down hard and this has been working really well. I'm using V10 chalk and it stays on until I wipe it off to put it in the case. My original tip shape with this tip was between a nickel and a dime, and it hasn't changed yet. The trick is to press in the "scuffed" surface instead of actually scuffing the surface. Either way that tip will outlast dozens of leather tips.

 

[dd0ck]

Just got the Bulletproof carbon fiber shaft with a red recoil tip in the mail this week. I really love the shaft, and wish I had ordered one earlier. Everything Bulletproof product has exceeded my expectations. Great stuff.

I’ve put in a ton of hours and the tip is holding up great. Chalk retention has been really great, a lot better than the tip that I had installed by a local repair guy.

@Bulletproof Billiards, what was used to shape and scuff the tip in the install?

I’d love to use that the same thing when it comes time to maintin this tip—really just want to maintain the same texture it has now, because it plays perfectly.

 

[boogieman]

Just got the Bulletproof carbon fiber shaft with a red recoil tip in the mail this week. I really love the shaft, and wish I had ordered one earlier. Everything Bulletproof product has exceeded my expectations. Great stuff.

I’ve put in a ton of hours and the tip is holding up great. Chalk retention has been really great, a lot better than the tip that I had installed by a local repair guy.

@Bulletproof Billiards, what was used to shape and scuff the tip in the install?

I’d love to use that the same thing when it comes time to maintin this tip—really just want to maintain the same texture it has now, because it plays perfectly.

I use an old Kamui gator grip. It works well. They sell knockoffs/different brands of the stuff that work just as well. With the gator grip type tool your goal is to just lightly lift the fibers/clear the old chalk out. Don't grind the tip away, just kind of lift/scuff the surface.