QXtenders

8

8ball9ball

Registered
I have several POOL CUE EXTENSIONS "QXtenders" in stock, They range from 14-1/2" to 20" long. I make my "QXtenders" out of old pool cues, so they look and feel like a pool cue. They are made to fit most Pool Cues and fit cues best that are 1-1/4" in diameter at the butt. The butt has 1 heavy coat of SPAR URETHANE, the head has a coat of 2-part epoxy, and a soft material socket insert that will not scratch your pool cue. All of my extensions that have any decorations, they are NOT INLAYS, They are DECALS. They are all individual's, no two of them are alike. There may be a small blimish in the wood of any one of my "QXtenders", But it will be filled with the Polyurethane. The blimishes come from the pool cues that may have been bounced off of the table or the wall because someone may have missed a shot. It may be visible to the eye but not to the touch. I try to take them all out but there is some that are deep in the wood. I can also provide a "PIGGYBACK" carrying case "w/straps and velcro that wrap around your cue carrying case" for an additional $10.00 if you order it with the "QXTENDER", Otherwise with postage your cost will be $15.00 for the carrying case. If you order one of these "Piggyback" cases, Please give me the measurement around your Cue Case.

Plain QXtenders are $20.00 including postage to a US address.
Decorated QXtenders start at $25.00 including postage and go up from there.

This is my first posting and I am having trouble posting a picture, I would appriciate any help with picture posting.
 
Sent you a private message. (Look to the right and up a bit)
Click on private messages and the pick from the list that pops
up below. Or you can email pics to dccro11@aol.com, and I'll
post them in this post.
 
I need pictures to become more interested so I'll bump this up and see if anybody offers to post the pictures for you.
 
Finally Pics

Sorry for the delay, I finally have pictures up.

DSCN3003.jpg


DSCN2995.jpg
 
Welcome to AZB... forgot to say that before. :)

How deep is the receptacle that the cue to slides into? Does the receptacle unscrew from the handle?
 
Just curious how can you adjust the extension if you have a thinner of fatter butt. What weight are we talking about on these extensions? An extra 7 or 8ozs? does the bottom of the extension can damage the edge of the butt?
 
Last edited:
JimS said:
Welcome to AZB... forgot to say that before. :)

How deep is the receptacle that the cue to slides into? Does the receptacle unscrew from the handle?
Click to expand...

Thank you for the welcome! The socket of my QXTENDERS are 1-1/2" deep and hold the cue snuggly. I make them to fit pool cues that are 1-1/4" in diameter, So please measure your cue to be sure. I can also make them to fit any size cue.

The head does not detatch from the butt, but could be made to detatch.
Thank You
8ball9ball

The socket will not damage your pool cue.
 
Last edited:
BENFICA said:
Just curious how can you adjust the extension if you have a thinner of fatter butt. What weight are we talking about on these extensions? An extra 7 or 8ozs? does the bottom of the extension can damage the edge of the butt?
Click to expand...



I would make the socket to fit a smaller or larger pool cue. As for the weight, of coarse that would depend on the length of the butt, we are talking 5oz to 12oz. I use one and don't notice the weight at least for that one shot that it is used.
Thank you
8ball9ball
 
8ball9ball said:
Thank you for the welcome! The socket of my QXTENDERS are 1-1/2" deep and hold the cue snuggly. I make them to fit pool cues that are 1-1/4" in diameter, So please measure your cue to be sure. I can also make them to fit any size cue.

The head does not detatch from the butt, but could be made to detatch.
Thank You
8ball9ball

The socket will not damage your pool cue.
Click to expand...

So they will hold a cue that has a 1.25 butt. I noticed that the inside part that slips onto the butt is padded. How plush is this material? What is the material? I have a cue that is approximately 1.28 at the butt, only a difference of 3/100ths. Would this work for me? Very interested. Please let me know. Thanks. Rob.

By the way I am interested in the second one down in the pic. Please reserve that one for me it this will work with my cue. Thanks.
 
Last edited:
2 Things...................

First, I've sent you 3 or 4 Personal Messages. Either your not responding
because A: You dont know how to, or B: You dont want to, or C: Your not
receiving them. Either way, your not going to get too many sales by not
responding to them. Please et me know if your receiving my PM's. If not,
we'll have to do it another way. If so, please answer them. I'm a potential
buyer.

Second, Bump to the top.
 
I'll be anxiously awaiting a review on this new product from a reputable AZ'er. My interest has been aroused. :grin:

Trevor
 
IA8baller said:
I'll be anxiously awaiting a review on this new product from a reputable AZ'er. My interest has been aroused. :grin:

Trevor
Click to expand...

Honestly Trevor, I have a Hager extension and I love it. I just want to
buy one of those holsters.
 
I love the hager also, but the problem is transporting the hager. Its useless for me if I can't bring it to the poolhall with me. I might purchase the holder like you Snook
 
You must log in or register to reply here.
Back
Top