Maybe some of you on here can help me out with this cue. I got this sneaky pete a couple months ago. It has a brown phenolic joint and two shafts. the cue that it was converted from is a nice bar cue, not the cheap ones you see today. The points are pretty even and it has a 3/8 10 stainless pin in it. One of the shafts is a predator 314 and the other is shaft made for the cue. This cue plays awesome and hits like a Scruggs. I have had several Scruggs sneaky petes and this one is very similar except this has the 3/8 pin. I have seen a couple cues of his that had this same pin though and i think one of them was listed on here a good while back. The guy i got this from was from one of the Carolinas and he said he had it for about 3 or 4 for years and the guy he got it from had it for about 6 years. Im guessing this is in the neighborhood of about 9 - 11 or so years old maybe a little more, thats why i thought it might be a Scruggs instead of a Frey. I know Tim signed most all his cues and this one has no signiture anywhere. The finish on this cue has come off for the most part but it is very smooth almost like a satin finish or natural finish. Just by holding this cue You can tell it is done by a very good cue maker. the butt weighs 14.7oz and the shafts are 3.7oz with the predator being 3.3oz.
Attachments
Last edited: