Three new full-spliced cues. Just completed.

DBK

DBK

AzB Silver Member
Silver Member
Excuse if a double post. But I have thought probably this theme
http://forums.azbilliards.com/showthread.php?t=115584&page=2
is old and from it do not wait for anything new.:)

Has just finished three cues. Very interestingly your opinion concerning the general design, inlays, etc. Whether is a sense to move in this direction?

123410410.jpg


123410407.jpg


123410405.jpg


Thanks and Merry Christmas.
 
Once again, very nice. I really like the cue in the center. The only thing I would change is the are the inlays. They are too large in my opinion. I wouldnt have any inlays in the butt.
 
I would be all over the top cue if it didn't have the sleeve on the but. Pm me price and specs on the cue as is and if I were to order order without the sleeve.

Thanks
 
Thanks.

I love the first cue too. But I love the others too. Otherwise I would not show they.:)

I specially made sizable inlays, as base design. On the basis of these design will be possible new inlays, maybe the small size and probably "multi-storey" with internal additional inlays. The principle - from simple to difficult. Though these incrustations uneasy too.

Also without an inlays is possible to make. This one for example.
http://forums.azbilliards.com/showthread.php?t=95521
 
Love your cues, Be yourself, You wood combinations are really nice. Wish I could afford one. Thanks for showing. Jim
 
I would be all over the top cue if it didn't have the sleeve on the but. Pm me price and specs on the cue as is and if I were to order order without the sleeve.
Click to expand...

PM is sent

Specs and Price for the top cue please.
Click to expand...

Top - the minimal weight (only with the bamper) 525 grammes (about 18.5 ounces), balance - 49 sm (about 19.3"). With a long weight bolt 540 grammes (about 19.1 ounces), balance of 47.5 sm (about 18.7"),it is possible to increase weight approximately by 1.0-1.5 ounces. The laminated maple shaft 13 mm.

The second- the minimal weight (only with the bamper) 495 grammes (about 17.5 ounces), balance - 48 sm (about 18.9"). With a long weight bolt 520 grammes (about 18.1 ounces), balance of 46.5 sm (about 18.3"), it is possible to increase weight approximately by 1.0-1.5 ounces. The Hornbeam shaft 12.5 mm.

The third- the minimal weight (only with the bamper) 495 grammes (about 17.5 ounces), balance - 50 sm (about 19.7"). With a long weight bolt 520 grammes (about 18.4 ounces), balance of 48 sm (about 18.9"), it is possible to increase weight approximately by 1.0-1.5 ounces. The laminated maple shaft 13 mm.

All three have length 150 sm (about 59", 28.5"+28.5"), joint diameter about 21.5-21.6 mm (about 0.846"-0.850"), Butt diameter near bamper about 31.2-31.5 mm (1.23"-1.24"). Radial pin.

As for price? I think now in holidays the price of each will be 750.0 with shipment.

Merry Christmas.:smile:
 
Tempting... The weight is in my ballpark. Let me think about it until next week. Hopefully, it's still available.

What's the lenght? 58"
I think I saw you posted that it also has Joint Protectors, right?
How much with an extra shaft (Hard Rock Maple or Hornbeam)?

Merry X'mas!!!

Thanx,
 
Your cues look really nice. I like the sharp bottom ends on your points. Keep up the good work.
 
Thanks all for kind words and support.

Tempting... The weight is in my ballpark. Let me think about it until next week. Hopefully, it's still available.
Click to expand...

Welcome. I yet have not offered them officially for sale. Yesterday I have put last clear coats. I hope the cues will be ready on December, 29-30.

What's the lenght? 58"
Click to expand...

Length of 150 sm that approximately 59 ".

I think I saw you posted that it also has Joint Protectors, right?
Click to expand...

These cues were born on holidays therefore will not stay without gifts. :)

How much with an extra shaft (Hard Rock Maple or Hornbeam)?
Click to expand...

$150-$180. But I now have no Hard Rock Maple only the laminated maple or Hornbeam. I hope to receive new Hard Rock Maple shaft blanks at the end of January, 09.

Thanks once again. Merry Christmas and Happy New year.:)
 
Killer Cues as always...............dump the Inlays don't fit on you style cues
 
Killer Cues as always
Click to expand...
Thanks Greg.

dump the Inlays don't fit on you style cues
Click to expand...

Even on the second?:(

You have already found the style very much recognized and sharp, for example here, at once it is visible that is Gsirca cue. :wink:
http://forums.azbilliards.com/showthread.php?t=125087

I only search for the style. These inlays have been completely prepared and I was not kept to put they on the new cues.:) But I do not add the price for these additions, it is only search.

As in a joke about two violinists, old and young. Fingers of young fly on violin without a stop, and fingers of old almost stand on place hardly moving. But both play superb. To the old man ask question - why young is so active, and you are so passive. The old man answers - he only searches, but I have already found. :)

Merry Christmas and Happy New Year
 
Last edited:
Love the splices.
We may have to talk if 09 proves fruitful for me.

I am with a few others on the inlays though. However beauty is in the eye of the beholder.

Cheers!!!
 
Thanks.
Welcome. I hope new year will be successful for all despite of a negative prediction.:thumbup:

Happy new year.
By the way, New Year's gifts also are ready.:D
123598372.jpg
 
Has answered all PM. Thanks for kind words.

It is a lot of questions on the covering. I promised to make new photos. Probably these photos will tell more about the covering.

123637974.jpg

123637985.jpg

123637996.jpg


Thanks.
 
You must log in or register to reply here.
Back
Top