W T B 1x2 GTF KopyKat ON THE CHEAP

you can try ASKA off ebay they are slightly less then sterling but same/better quality

both are vinyl
 
maybe a 1x2 case just like the GTF KopyKat.
just enough to get my cue to the room and back without scratching it.
used will be ok, but it has to be dead clean, maybe a thomas or george or centennial ect ect.
 
Nothing wrong with the Copy Kats Bud.
I have a couple of GTF and I can tell ya one thing. The protection is great.

I believe that JB puts the same interiors in the CKs.
With the type of vinyl used in some cases these days, you'd be hard pressed to tell the difference between that and leather.
 
you can try ASKA off ebay they are slightly less then sterling but same/better quality

both are vinyl

there's a reason why i particulary want GTF Kopy Kat and GTF Replica... L@@K
 

Attachments

  • GTF.jpg
    GTF.jpg
    14.3 KB · Views: 581
I have this its george.1x2 black

its george leather eel ....$165 shipped......usa only
 

Attachments

  • justi_george 007.jpg
    justi_george 007.jpg
    29.2 KB · Views: 553
  • justi_george 009.jpg
    justi_george 009.jpg
    43.9 KB · Views: 551
  • justi_george 012.jpg
    justi_george 012.jpg
    27.1 KB · Views: 546
i think the KopyKat is great, there would be no trouble at all to put a Fellinni style lock on one of these.
 

Attachments

  • GTFe.jpg
    GTFe.jpg
    75.1 KB · Views: 490
  • GTFf.jpg
    GTFf.jpg
    52.2 KB · Views: 509
  • GTFg.jpg
    GTFg.jpg
    56.2 KB · Views: 499
i think the KopyKat is great, there would be no trouble at all to put a Fellinni style lock on one of these.

I bought one of these about 3 months ago. And LOVED it at first. But within a couple of hours the little Kopy Kat name plate popped off and was lost forever. I asked about getting a replacement from the guy I bought it from and was told 'no problem once I get them in'. Never heard from him again.

At first I REALLY loved the friction fit top. But nowadays, if you grab it by the lid, whether there's a cue inside or not, it just slides right off. Kinda disappointing. If you don't grab it by the lid though OR turn it upside down, you should be fine .
 
check your private message box, i asked if you'd like to sell that one.

I bought one of these about 3 months ago. And LOVED it at first. But within a couple of hours the little Kopy Kat name plate popped off and was lost forever. I asked about getting a replacement from the guy I bought it from and was told 'no problem once I get them in'. Never heard from him again.

At first I REALLY loved the friction fit top. But nowadays, if you grab it by the lid, whether there's a cue inside or not, it just slides right off. Kinda disappointing. If you don't grab it by the lid though OR turn it upside down, you should be fine .
 
i bought one of these about 3 months ago. And loved it at first. But within a couple of hours the little kopy kat name plate popped off and was lost forever. I asked about getting a replacement from the guy i bought it from and was told 'no problem once i get them in'. Never heard from him again.

At first i really loved the friction fit top. But nowadays, if you grab it by the lid, whether there's a cue inside or not, it just slides right off. Kinda disappointing. If you don't grab it by the lid though or turn it upside down, you should be fine .

hey mia, are you reading this, i'll buy yours.
 
waiting for invoice from seller.
if all goes well, this is the GTF case i'm coming home with.
 

Attachments

  • qw321aa.JPG
    qw321aa.JPG
    51.9 KB · Views: 167
  • qw321bb.JPG
    qw321bb.JPG
    47.1 KB · Views: 163
GTF 2 x 4 interior

thought some of you might like to see the larger GTF case interior.
 

Attachments

  • ww456aa.jpg
    ww456aa.jpg
    48.4 KB · Views: 148
my GTF 1x2 case is lost in the USPS mail and recovery does not seem likely.

still trying to find a decent 1x2 GTF on the cheap.
 
Back
Top