What’s the diameter of your Butt?? 😏

[middleofnowhere]

On a 29 inch butt .840 to 1.25 was pretty much standard. I have never measured one but today's cues as I see on tv look thinner. I played with Steve Miz's cue and as big as he was it had a pretty slim butt.

 

[garczar]

i had schmelke make my 60" sneaky 1.22 and its perfect.

 

[David in FL]

My wife says it's perfect.

But then, over the years I've convinced her about other measurements that probably aren't quite what I claim…

 

[jeephawk]

This thread is not delivering on its promise.

 

[Paul_#_]

get folks to post what cue the have and what the butt diameter is for that cue. Kind of building a data base.

AZers data below is from this link for an AZ post.

Anton's Ukrainian _________ 28.9 mm or 1.14"
Viking skinny ______________ 30.6
Newer Predator ___________ 31.2
Newer Predator ___________ 31.4
Pure X_____________________ 31.3
Cuetec _____________________31.7 or 1.25"
Falcon ______________________32.0
2010 Predator _____________32.6
Brunswick __________________32.7
Mali _______________________ 32.8
Meucci BMC _______________32.8
Viking ______________________33
Briggs (100-year old) ______35.3
Brunswick Master Stroke __36.8
WHP 22 ounce ____________37.5 or 1.48"

I have a 22oz WHP with natural veneers and a Rambow ring, the butt is 37.5

My Brunswick Masterstroke I have,maxed out at 36.77 mm. and Bmc meucci I got is: 32.82 mm

Anton's Ukrainian cue at 28.9mm & a 100-year old Briggs one-piece cue at 18 ounces: 35.3mm

My 2010 Predator is much more bell shaped and both of my newer Preds are slimmer.
1.285" vs 1.230" and 1.235" at the fattest point on each.

 

[Johnny Rosato]

My Rick Howard is 1.27 & .84 joint
McDermott E-B5 is 1.29 & .85
McDermott D-4 is 1.28 & .85.5
Those are the only cues I own now.
(I am looking for a beater Sneaky for the "more lively"
joints here In Birmingham and down on the river).