http://forums.azbilliards.com/showthread.php?t=321065
I have followed the careers of both Glen and Mark Gregory over the last few years. I would bet money, and have seen, that Glen doesn't want any part of a match between them measuring mechanic ability. Glen will come back with the fact that he taught Mark everything he knows, but its become pretty obvious lately that Glen is full of sh!t in that department. It's sad that Glen is allowed to bully every other table tech off of here, so he is considered "the guy" in his own little world.
It is true that I thought I'd have him back later to do more work in my table, but that was only because I was new to AZ and didn't know any other mechanics. I'd let Zach, Mark, or Donny work on my table now that I know about them, but I wouldn't let Glen eat the peanuts out of my sh!t
"and yes, I'll even pay the shipping back". Are you seriously trying to look like the Good Samaritan here? You told him his rails would be done and back to him 2 months ago, all the while holding his coin. ALL HE WANTED WAS HIS RAILS FIXED TWO MONTHS AGO LIKE YOU PROMISED. how hard is that for you to understand?
Then why did you tell him he'd have them two months ago and not reply to his questions? If you had been honest he could have shipped the rails to Donny, Zach, Mark, or a number of other guys that could do the same work and had them a couple months ago. there is no excuse for dishonesty. This thread wouldn't have ever started had you been honest anytime during the three on this you had his rails.
Glen, I didn't get ran out at all. I had numerous PMs thanking me for calling you out. You've ran off most of the great mechanics on there with your ego. The deal is made?!?!? Tony made a deal in FEBRUARY, and you weren't honest enough to keep it. I'm sure Tony is like me, we'd have chosen another mechanic had we known the options now.
Glen, for heaven's sake, quit digging. He put a thread on here a few days before he called you out saying he had a Gandy without rails for sale because the guy that had his rails was unresponsive. So what exactly were you doing to help him set up his table then? If you had been honest and told him "I can't get to it, but here are the guys that can do the rails"' he would have been playing pool in the table he saved up for two months ago.
You're a classy son of a gun Glen. Safe travels.
So are you going to answer my question or just duck? This thread is about how you treated a customer poorly, and your reaction to it has out the exclamation point on your ability to take care of your clientele.
Ok Glen, I'll talk slow and loud because its pretty obvious you can't keep up on this thread
Q:. Why are you sending the rails AND the money back to the OP?
A: because you picked them up in FEBRUARY and told him he's have them in MARCH
Q: why are you butthurt that he/ we have called you out?
http://forums.azbilliards.com/showthread.php?t=163213
This isn't the first time Glen has sat on the guys goods AND his cash. But just listen to Glen, as we have no business on HIS forum, even if he does act like a dipshit.
Glen, you bullshit you're friends and ill bullshit mine. Do you really expect us to believe that Tony getting his rails back UNTOUCHED three and a half months later is to his liking? You're a piece of work.
In case you think this thread was the reason Tony got his money back, you're badly mistaken, all he had to do before this thread was text me that he wanted it back and I would have been gladly returned it...so don't even go there!!
Glen
Sounds familiar from a few years ago doesn't it?
It is obvious you don't care what Tony believes either.
So you want to bring his personal issues into this too? You haven't made a post before on here, but you drag the OP though the mud? Shame on you. I sent red rep your way and I hope others do the same.
Then I'm wrong, not afraid to admit it. You got defensive right off the bat and talked about "IRS issues", which was not appropriate. He piled on with the same BS.
Dirtbag? I've told nothing but the truth and anyone that questions that can send me a PM. My wife will attest to the way you treated her and our household while you were here. If you have a problem with me, then we can meet up and figure it out, you've yet to send a PM or call because you know what you did. You are the dirtbag, dipshit
You did plenty at our home that led to our decision that you're never welcome again. Zach, on the other hand, is welcome whenever. My wife said she had never seen such a pig as you. She fed you, packed Dr Peppers to you,and you never once thanked her. If you are calling me a liar, then I'm absolutely calling you out. Let me know next time you're in Idaho and we can figure it out. You're used to people calling you a liar, I'm not because I don't lie.
What did I lie about? She's sitting right here.
It's LIAR dipshit. I will TALK LOUD AND SLOW AGAIN BECAUSE OBVIOULSY YOU CAN'T KEEP UP
I didn't say anything because I was new to AZ and didn't know there were other guys out there that could do the same work. Knowing what I know now about you, I wouldn't let you polish my balls, let alone touch my table. And as for calling me a liar, send me a PM next time your in my area. I might not be able to whip you, but if you're feeling froggy, then jump fat man. Calling someone a liar is a big deal around here, especially if you're wrong.
That was a post from Zach moron. I've said multiple times that Zach is welcome here anytime, but not you. Safe travels
Read my post and look at the pics moron. Did I shake your hand for a pic when the job was done? No, because Zach did all the work and you were a tool. You came to the house at 10am the second day, when Zach had been working on the table for a couple hours. Zach was a great guy and is welcome here anytime, but you are a classless tool who keeps digging a bigger hole because you can't do the right thing.
http://forums.azbilliards.com/showthread.php?t=325510
Glenn is a liar
From RKC roughly six weeks ago:Before I sent Tony his money back by Walmart moneygram, I asked him if he was sure he wanted to go this route, he assured me that he did, So, I sent the money back...
Another helpful response from RKC. He's not only one of the biggest trolls on AZ, but also the king of not answering a question, but using plenty of smilies
:wink:
http://forums.azbilliards.com/showthread.php?t=329887
How many years did Diamond market tables that banked short? I would rather deal with larger facings than a table that didn't play true.
You didn't answer my question Glen. How many years did Diamond market their tables (that you say you designed) that bank short? Thanks so much for answering.
You're right, I don't know anything about it. Just going off of what you told me. How many years were they out before they fixed it? Seems weird you would set up all those tables that banked wrong.
Fair enough, thanks. You're very critical of other table manufacturers that have flaws in their tables, so I was wondering why you set up so many diamond tables with a flaw in the rails? BTW, you told me you designed the diamond pro-am, along with the fact you pioneered the marketing of McDermott cues. I can use smilies too
http://forums.azbilliards.com/showthread.php?t=331693
More crap. Glen, did that guy get his rails back yet?
Best 2 out of 3 for $1k a man Straight pool to 150pts Race to 11 9 ball Race to 11 8 ball Winner breaks, rack you're own. I have a table and I would hope you approve with how it's set up. Say when fat man
You're a pool player, not a furniture installer, right? If you're feeling froggy, then jump fat man
Idiot, you know where I live if that was the case. I hear "I can't float $1k". Hell, I think I got the worst of the game with what you've spewed about your skills. Feel free to take this to PMs so we don't wreck the thread
http://forums.azbilliards.com/showthread.php?t=336630
Don't let Glen get under your skin. He spouts off and defends it, even if proven wrong. And for the record...he's a banger. I played him 3 racks and he couldn't make 3 balls in a row.....on a table HE set up.
Yeah, you have all the answers. Like when you were at my house and said we had to drive 30 miles to town to buy shorter rail bolts. I said "why don't we just cut some down?" You said we couldn't do it until I explained we do shit like that every day in the ranch. Next thing I know trees a post on AZ on how to cut rail bolts down. Didn't take expert knowledge dipshit, just some common sense. Difference is, those with common sense don't toot their own horn when they figure it out. Preach on buddy
Here's the link.
http://forums.azbilliards.com/showthread.php?t=200543&highlight=rail+bolts
Many other chime in on ways to do it easier (which I also told him), but the moron keeps defending himself like he reinvented the wheel. RKC is an idiot, but talks LOUD and likes smiley faces while living in his van
