tip technology - hardness at center different from hardness at edges

Hail Mary Shot said:
I was hoping that we have manufacturers that sell tips of typical sizes now that are already cut and shaped. do they still expect people to play with 14mm tips? pretty much the standard now is less than 13mm. hopefully they get the drift. also, I hate using the typical trimmer/sharpener. they don't cut good. I find doing it manually with a box cutter faster and much better.
Click to expand...
Somewhat agree, but for single layer tips such as Triangle, you want the biggest ones. They come from the better, thicker part of the hide.
 
maha said:
cant you size tips to the exact mm size someone asks for?. then no trimming needed. put on and play almost immediately.

you could also then sell any brand of tip to satisfy all.

this way people can pop off a tip and try a different one and even put back the one they took off.
Click to expand...
There are so many tip sizes, Cuetec has a shaft that is 10.5 mm, I have shafts that are 12.5mm,12.0 mm and 11.8mm, and there are plenty more sizes, then you have different tip radius as well, thats why they just make them bigger so it covers all of them.
 
you can cut them to any size for a customer. your pants don't come in one size and you have to resize them.
 
You must log in or register to reply here.
Back
Top