Birdseye Maple 10 Cue Display Case

FAST_N_LOOSE

<--I collect kicks too!
Silver Member
I BOUGHT THIS FROM A DISPLAY CASE MAKER ON HERE ABOUT 1.5 YEARS AGO. I NEVER HUNG IT UP, I NEVER PUT A CUE IN IT, IT'S JUST SITTING HERE. AWESOME FIGURE IN THE BIRDSEYE. HOLDS 10 BUTTS, HAS A LOCK ON THE DOOR, AND HAS A REAL GLASS PANE. I PAID 450 FOR THE CASE WITH THE SHIPPING.

I'LL TAKE $OLD INCLUDING USPS PRIORITY MAIL SHIPPING.

NO YOU DON'T GET THE VACCUM OR THE OTHER CRAP IN THE PICS....LOL.

DSC00580.jpg


DSC00582.jpg


DSC00583.jpg


DSC00581.jpg
 
Last edited:
Very nice, that would look great in my pool room displaying my tiny little collection.

Is there currently any sort of lighting on the inside??

We may talk............... :)

Thanks,
Jimmy
 
Jimmyrayk said:
Very nice, that would look great in my pool room displaying my tiny little collection.

Is there currently any sort of lighting on the inside??

We may talk............... :)

Thanks,
Jimmy

NO LIGHTING, BUT I HAD IT MADE SHALLOW SO WITH OVERHEAD TRACK LIGHTING SHINING ON IT, IT WOULD BE LIKE A MUSEUM DISPLAY.
 
KOINNKID said:
Does it hold shafts as well?

NO SHAFT SPOTS..... I HAVE A RACK THAT I HANG MY SHAFTS FROM.

YOU WOULDN'T WANT THE SHAFTS STORED STANDING UP LIKE THIS, AT LEAST I WOULDN'T.
 
All Pm's Replied To... If You Need To Contact Me Anymore Tonight, Call Me. I'll Be Away From A Computer. (if All Goes Well)
 
Jimmyrayk said:
Is there currently any sort of lighting on the inside??

Thanks,
Jimmy
I had a friend who had a display case similar to this in his pool room except his was tall enough to have the shaft on the butt in the case. He had light bulbs in it to show off the cues and the heat from the light dried the cues out to the point that some of them warped! I'd be sure to use a light source that didn't create heat in the display case........

James
 
Last edited:
SCCues said:
I had a friend who had a display case similar to this in his pool room except his was tall enough to have the shaft on the butt in the case. He had light bulbs in it to show off the cues and the heat from the light dried the cues out to the point that some of them warped! I'd be careful putting light (heat) in a cue display case. Just a tip to think about........

James

I HAVE AN LED LIGHT SETUP (NO HEAT) IN MY BIG DISPLAY CASE AT THE POOLHALL. WORKS GREAT, WITH NO ADVERSE EFFECT ON THE CUES.

P.S. THE SHAFT BEING ON TEH BUTT WHILE DISPLAYED WAS ALSO A BAD IDEA FOR THE CUES. I'D ALMOST THINK, THAT THE FACT THAT THEY WERE SCREWED TOGETHER WILE DISPLAYED WAS MORE OF A CAUSE FOR THE WARP, THAN THE LIGHT WAS.
 
FAST_N_LOOSE said:
NO SHAFT SPOTS..... I HAVE A RACK THAT I HANG MY SHAFTS FROM.

YOU WOULDN'T WANT THE SHAFTS STORED STANDING UP LIKE THIS, AT LEAST I WOULDN'T.
Marcus, one quick question and back to the for sale thread...

I have a friend that I might have build me an oak case similar to this but I'm curious as to the best way to store all the shafts. If you hang them vertically from a rack or store them vertically in a display case like this, what is the difference and how does it affect the shafts?
 
FAST_N_LOOSE said:
I HAVE AN LED LIGHT SETUP (NO HEAT) IN MY BIG DISPLAY CASE AT THE POOLHALL. WORKS GREAT, WITH NO ADVERSE EFFECT ON THE CUES.

P.S. THE SHAFT BEING ON TEH BUTT WHILE DISPLAYED WAS ALSO A BAD IDEA FOR THE CUES. I'D ALMOST THINK, THAT THE FACT THAT THEY WERE SCREWED TOGETHER WILE DISPLAYED WAS MORE OF A CAUSE FOR THE WARP, THAN THE LIGHT WAS.
You are probably right about not storing the cues screwed together. The small light bulbs he used created heat and they took all of the moisture out of the case.

LED lights without heat would be fine.
 
Zeek said:
Marcus, one quick question and back to the for sale thread...

I have a friend that I might have build me an oak case similar to this but I'm curious as to the best way to store all the shafts. If you hang them vertically from a rack or store them vertically in a display case like this, what is the difference and how does it affect the shafts?

HANGING FROM A RACK, IS BY FAR THE BEST WAY... JUST LIKE THE CUEMAKERS STORE THEM THROUGH THE WORK STAGES.

THERE IS NO SIDE PRESSURE ON THE SHAFTS IF THEY'RE HANGING.

SIDE PRESSURE IS BAD....
 
SCCues said:
You are probably right about not storing the cues screwed together. The small light bulbs he used created heat and they took all of the moisture out of the case.

LED lights without heat would be fine.

I'M VERY SURPRISED THAT SMALL LIGHT BULBS COULD CAUSE THE CUES TO WARP. THE SECRET IS TO HAVE VENT HOLES AT THE TOP OF THE CASE SO THE HEAT CAN ESCAPE. THAT'S HOW I HAD MY FIRST ONE SET UP.
 
just don't use burger king heat lamp lights like I did with mine.


chris G<--------likes his wraps slightly warm, but turned his cues into overdone french fries.
 
FAST_N_LOOSE said:
I BOUGHT THIS FROM A DISPLAY CASE MAKER ON HERE ABOUT 1.5 YEARS AGO. I NEVER HUNG IT UP, I NEVER PUT A CUE IN IT, IT'S JUST SITTING HERE. AWESOME FIGURE IN THE BIRDSEYE. HOLDS 10 BUTTS, HAS A LOCK ON THE DOOR, AND HAS A REAL GLASS PANE. I PAID 450 FOR THE CASE WITH THE SHIPPING.

I'LL TAKE $375.00 INCLUDING USPS PRIORITY MAIL SHIPPING.

NO YOU DON'T GET THE VACCUM OR THE OTHER CRAP IN THE PICS....LOL.



DSC00582.jpg


DSC00583.jpg

Love the wood in this Displaycase .... simply awesome ....

Good luck Buddy
Berny
 
cuemasterpieces said:

Love the wood in this Displaycase .... simply awesome ....

Good luck Buddy
Berny

THERE REALLY IS SOME NICE FIGURE TO IT. THAT'S WHY IT'S SUCH A SHAME FOR ME NOT TO USE IT.

I'M SURE THE BUYER WILL BE VERY HAPPY WITH IT.
 
Back
Top