New Thru Spindle With Daul Chucks

brianna187

brianna187

BRIANNA SINCE 1988
Silver Member
We Are Offering A New Thru Spindle With Daul Chucks This Will
Fit Our New Storm Cnc To Allow Threading , Making Full Splice Blanks With The Cnc Also Allowing You Do Do Butt Work And Joint Work, Boring, Ring Cutting And Much Much More. Also This Thru Spindle With Daul Chucks Will Be Avail For Sale By Itself As A Stand Alone Unit, Also Available In A Cue Repair Lathe With Tailstock We Are Trying To Have This Ready For The Us Open Oct 17th Thru The 25th It May Not Be For Sale There But We Will Have A Proto Type With Production To Follow In Early November
I Think This Will Open The Door For Many That Cant Afford More Costly Units And Allow Poeple To Get A Start With Spending Huge Amounts Of Money .this Will Be Accurate Enough Also For The Professional Cue Maker .as Many Of You Know A Little Over A Year Ago I Bought Into A Large Machine Shop Allowing Us To Make Our Own Fixtures Direct Saving You Money And Suppling Quality Products Like Our New Storm Cnc. ....and Lightning Shaft Machine ... And Taig Based Breeze Cnc .let Brianna Be Your One Stop Cuemaking Dealer ........
 
Thru-spindle with Dual Chucks?
I have no idea what that is at all but sounds good.
Does it fit 11-12" metal lathes Lee?
 
brianna187 said:
We Are Offering A New Thru Spindle With Daul Chucks This Will
Fit Our New Storm Cnc To Allow Threading , Making Full Splice Blanks With The Cnc Also Allowing You Do Do Butt Work And Joint Work, Boring, Ring Cutting And Much Much More. Also This Thru Spindle With Daul Chucks Will Be Avail For Sale By Itself As A Stand Alone Unit, Also Available In A Cue Repair Lathe With Tailstock We Are Trying To Have This Ready For The Us Open Oct 17th Thru The 25th It May Not Be For Sale There But We Will Have A Proto Type With Production To Follow In Early November
I Think This Will Open The Door For Many That Cant Afford More Costly Units And Allow Poeple To Get A Start With Spending Huge Amounts Of Money .this Will Be Accurate Enough Also For The Professional Cue Maker .as Many Of You Know A Little Over A Year Ago I Bought Into A Large Machine Shop Allowing Us To Make Our Own Fixtures Direct Saving You Money And Suppling Quality Products Like Our New Storm Cnc. ....and Lightning Shaft Machine ... And Taig Based Breeze Cnc .let Brianna Be Your One Stop Cuemaking Dealer ........
Click to expand...


I think we all know you meant to say "without"....but I thought it was funny!

Joey...I believe he talking about having a chuck on each end of the headstock spindle.
 
BarenbruggeCues said:
I think we all know you meant to say "without"....but I thought it was funny!

Joey...I believe he talking about having a chuck on each end of the headstock spindle.
Click to expand...


YES YOU ARE CORRECT YOU CAN CHUCK A BUTT OR A SHAFT THRU AND WORK ON EITHER END
 
brianna187 said:
YES YOU ARE CORRECT YOU CAN CHUCK A BUTT OR A SHAFT THRU AND WORK ON EITHER END
Click to expand...
That's great.
I heard Dave likes working both ends. :thumbup:
 
corebuilder said:
Hey Lee, lets see some pics and specs. You raise some interest here.
Click to expand...
i will not have any pictures for the time being just letting everyone know we started on this and will have one for the us open i have everything needed to build this we will start this coming week. the through hole will
be around 1-3/8 with about 8 inches between chucks with 2 bearings
the center will be a solid block we will have a rear pulley simple but it will get the job done as far as price i have know idea at this time . we are using some higher dollars bearings when we are done and the unit is assembled we will machine bore both chucks mounted as a unit for super accuracy hope this helps somewhat
 
Lee, you have to excuse me for lack of knowledge about the Storm, but is this a Breeze big brother which is based on Align Rite design ? The pic's here
http://forums.azbilliards.com/showthread.php?p=1412824#post1412824
makes me feel that it is similar (A.R).

The new chuck arrangement, would this be possible to expand with a stepper motor so you could control the dual chuck setup from the CNC or would this be indexable and normal "lathe" operated? In case CNC I would be interested (depending on price of course) if you use a good stepper and the height is not greater then 200mm.

Kent
 
christian said:
I'd like mine with the turning/ cnc indexing option please.
Click to expand...
the shaft turning section works with a stepper and is ran thru mach 3
you have complete control over the speed . when tapering shafts you simply unplug your 4th axis and plug it in to the stepper that does the tapering then 2 simple check marks in the program changes to run the stepper for tapering simple easy with our shaaft tapering programs we turn off the Th shaft from turning anytime the cutter is not touching the wood we offer a program that cuts fro 1" dowel to finish size and we are working on a special rewrite of mach with fill in boxes to change sizes

the storm the breeze and the lightning not only will we sell you a machine
but will help make things as easy as we can for the owner with unsurpassed programing support and in house machine work

see all this machines and what they can do at the us open oct 19th thru the 25th plus the worlds best palyers and 30 other top notch vendors
 
...and your planning on selling this?

brianna187 said:
.....as far as price i have know idea at this time .....
Click to expand...

They'd frown on this sort of product development in business school! ;)
 
To Answer Your Question

Bill the Cat said:
They'd frown on this sort of product development in business school! ;)
Click to expand...
WE WILL SELL THESE BUT TIL I HAVE A FINISHED PRODUCT I WILL NOT KNOW THE COST AND WILL NOT GUESS ALL I CAN SAY IS THE PRICE WILL BE FAIR
 
brianna187 said:
The shaft turning section works with a stepper and is ran thru mach 3
you have complete control over the speed . when tapering shafts you simply unplug your 4th axis and plug it in to the stepper that does the tapering then 2 simple check marks in the program changes to run the stepper for tapering simple easy with our shaaft tapering programs we turn off the Th shaft from turning anytime the cutter is not touching the wood we offer a program that cuts fro 1" dowel to finish size and we are working on a special rewrite of mach with fill in boxes to change sizes

the storm the breeze and the lightning not only will we sell you a machine
but will help make things as easy as we can for the owner with unsurpassed programing support and in house machine work

see all this machines and what they can do at the us open oct 19th thru the 25th plus the worlds best palyers and 30 other top notch vendors
Click to expand...

I'm not sure if I understand what you are saying here. Is the dual chuck setup the 4th axis with a stepper which could be used for cutting spliced forarms/cues? Or is the dual chuck setup used for tappering shafts (which I would doubt) ?

What I'm looking for is a 4th axis with stepper which could be used with a tail stock. Then if it has a dual chuck setup this is great since it could hold items without the head stock.

I'm in Norway and would not be around the event you mentioned.

EDIT: I quoted the wrong post..



K
 
Last edited:
The STorm or the spindle?
Click to expand...


i was asking about the Storm.

i would advise against using a stepper for turning the workpiece.they don't go very fast and lose torque too easily.servo would be better or a small DC motor.
 
masonh said:
i was asking about the Storm.

i would advise against using a stepper for turning the workpiece.they don't go very fast and lose torque too easily.servo would be better or a small DC motor.
Click to expand...

Masonh; Good point and I was also concerned that this was the case. I have a turning setup so I'm only interested in a 4th axis for my CNC to do inlays and 3D work.

Well, I guess we just have to wait and see what it is then.

K
 
You must log in or register to reply here.
Back
Top