NYCueCollector
Banned
Now available for your enjoyment is a brand new Porper Model B pool cue lathe. This is the item that many people want, but few can justify the expense. Here is your chance to get a brand new one cheap, cheap, cheap! I purchased two of the lathes and have only used one of them.
$55 per spot paid via Paypal only. This will cover the original cost of the lathe and shipping to me, shipping to the winner and the expensive paypal fees. This will include shipping in the original crate. Reserve your spot in this thread, then I'll PM you with my address. After all spots are full and paid, the winner will be determined by the Pennsylvania state daily number lottey drawing.. ... www.palottery.com
This is how we will work it.. The pennsylvania daily number is a 3 ball drawing from 0 to 9 on each ball.. we will use the second and third balls to determine our winner.. example : the number 174 is drawn, that would mean place 74 would be the winner.. also there is a day and evening drawing.. once the raffle fills up we will decide which day and which drawing will be used.. there will be notification on this thread before any drawing is made so there will be no confusion..
* Due to recent developments, I am forced to require the following of all participants: You must have at least 1 year of AZ membership, or 100 posts, or 3 iTrader transactions with different members each having at least 1 year of AZ membership. (or I must know and trust you.) I hope you understand...
* International participants please note:
This is a larger and more expensive item to ship. Domestic shipping is included in your ticket price, but international shipping will be the responsibility of the winner on this one if applicable. Rather than saying no international participants on this one, I'm leaving the choice up to you.
Here is a picture and list of attachments. I am not taking pictures of this machine because it is still crated and I am not unpacking it to take pictures.
The Model B is the complete cue maker's workshop. The Model B will perform any and all steps necessary to make the cues of your dreams. Set-up for basic turning chores to tapering shafts, cutting points, installing joints is quick. Solid cast base and precision-machined carriage assures accuracy to ten-thousandths of an inch. A completely variable speed motor takes you through roughing or finishing steps without hesitation. If you could have only one machine in your shop, this one would have to be the one! After all the Model B Q-Lathe was engineered and built specifically for the cue maker by a cue maker who knew what it took. Includes warranty against defects for one year on parts and labor.
Dimensions: 62" L x 15" W x 13" H
Weight: 150 lbs. (approx.)
Motor size: 1/3 HP; 90 volt DC
Power Req.: 115 Vac/60 hz.
Speed: Variable 0-3200 RPM
Through Hole: 1.350"
2008 Model B Q-Lathe Components:
Drill Chuck with key
3 Jaw Bison Chuck with key
1 Alignment collect
2 Adjustable Collets
1 Wrap Holder
X-Y Tool Post
Router & Attachment
Taper Bar with micrometer adjustment
Indexing Lock
1 Dead Center
1 Steady Rest
Variable Speed Foot Control
1 Sanding Block
VHS or DVD Instructions
$55 per spot paid via Paypal only. This will cover the original cost of the lathe and shipping to me, shipping to the winner and the expensive paypal fees. This will include shipping in the original crate. Reserve your spot in this thread, then I'll PM you with my address. After all spots are full and paid, the winner will be determined by the Pennsylvania state daily number lottey drawing.. ... www.palottery.com
This is how we will work it.. The pennsylvania daily number is a 3 ball drawing from 0 to 9 on each ball.. we will use the second and third balls to determine our winner.. example : the number 174 is drawn, that would mean place 74 would be the winner.. also there is a day and evening drawing.. once the raffle fills up we will decide which day and which drawing will be used.. there will be notification on this thread before any drawing is made so there will be no confusion..
* Due to recent developments, I am forced to require the following of all participants: You must have at least 1 year of AZ membership, or 100 posts, or 3 iTrader transactions with different members each having at least 1 year of AZ membership. (or I must know and trust you.) I hope you understand...
* International participants please note:
This is a larger and more expensive item to ship. Domestic shipping is included in your ticket price, but international shipping will be the responsibility of the winner on this one if applicable. Rather than saying no international participants on this one, I'm leaving the choice up to you.
Here is a picture and list of attachments. I am not taking pictures of this machine because it is still crated and I am not unpacking it to take pictures.
The Model B is the complete cue maker's workshop. The Model B will perform any and all steps necessary to make the cues of your dreams. Set-up for basic turning chores to tapering shafts, cutting points, installing joints is quick. Solid cast base and precision-machined carriage assures accuracy to ten-thousandths of an inch. A completely variable speed motor takes you through roughing or finishing steps without hesitation. If you could have only one machine in your shop, this one would have to be the one! After all the Model B Q-Lathe was engineered and built specifically for the cue maker by a cue maker who knew what it took. Includes warranty against defects for one year on parts and labor.
Dimensions: 62" L x 15" W x 13" H
Weight: 150 lbs. (approx.)
Motor size: 1/3 HP; 90 volt DC
Power Req.: 115 Vac/60 hz.
Speed: Variable 0-3200 RPM
Through Hole: 1.350"
2008 Model B Q-Lathe Components:
Drill Chuck with key
3 Jaw Bison Chuck with key
1 Alignment collect
2 Adjustable Collets
1 Wrap Holder
X-Y Tool Post
Router & Attachment
Taper Bar with micrometer adjustment
Indexing Lock
1 Dead Center
1 Steady Rest
Variable Speed Foot Control
1 Sanding Block
VHS or DVD Instructions
Last edited:
