Someone sell me a cue with a thin handle...

both of these are 30mm at the bottom of the wrap.

TS2.jpg

TS5.jpg
 
Wondering if you want a thin handle because that is what you are used to having in your hand.....:rolleyes:

:thumbup:

Ken
 
Jeff Olney. Tricked out cue with veneer colors of a Gus Szamboti I ordered in the early 70's which was the first B/W veneered cue he'd done. Cue has solid ivory joint w/ivory Tiffany diamonds & ivory dash ring work. Specs:
2 unplayed shafts w/Ivory ferrules @4.0 & 4.1. !3mm & 12.8mm
Dead even ebony points w/ Black white veneer motif.
Leather wrap by Cory Barnhart
Butt is 30 cm at bottom of wrap. Delrin buttcap.19.2 oz total weight
Cue is new condition. $2100.00 Tim 919 247 3391
Olney2008fancy-timcompositeLarge.jpg
 
Hope You Get The Cue You're Looking For

Seems like you have a bunch of thin handle cues to choose from but that Olney cue is just flat out great looking and I've been told that an Olney cue plays absolutely greatand even better when the cue has a ivory joint. Dunno if that's true but I'd take a chance on an Olney cue that looks this good.
 
Paul Allers....

You might not be familiar with Paul but, he is a very popular cuemaker up here in the Northwoods. Typically building longer 59 to 60 inch cues with a smaller profile in the handle area and generally speaking more foreward balanced -- builds a very nice players cue!

He's a really wonderful guy to work with on a cue projcect and, he can build you about anything you can imagine -- loves really nice types of woods too.

pcallers@comcast.net or 360-929-8425 :thumbup:
 
ironworker78 said:
i thought big butts where all the rage theses days whats up with the thin butts lol...hahahah:thumbup:
Click to expand...

I still like big butts, just on my collection cues:thumbup: Sooooooo here's the deal..I bought one, and am almost ready to pull the trigger on another......I thank all who sent me cues and who made suggested...I actually used a few:thumbup: So if you still have one at a great deal that you think i can't pass up then you can still let me know.......next I am looking for a plain player showman and a mobley...I also will be posting up a wrap less brand new Tasc and a Mottey later today or tomorrow for a steal:grin::thumbup:

Thanks to all
 
9BallKing said:
You want the most playing thin butt cue order a new Black Boar
Click to expand...

You did see where he mentioned a budget of roughly $500-$3000, for a 4 point/4 veneer cue, right? You let me know when Tony starts selling brand new 4 point/4 veneer cues for $3K or under.
 
krbsailing said:
You might not be familiar with Paul but, he is a very popular cuemaker up here in the Northwoods. Typically building longer 59 to 60 inch cues with a smaller profile in the handle area and generally speaking more foreward balanced -- builds a very nice players cue!

He's a really wonderful guy to work with on a cue projcect and, he can build you about anything you can imagine -- loves really nice types of woods too.

pcallers@comcast.net or 360-929-8425 :thumbup:
Click to expand...

I will absolutely second that recommendation!!!! The above is his cell #. His landline is 360-675-1408.
 
Jim Baxter said:
Hi I have this one , I started a couple months ago , right now on back =
burner . In sealer coat . 30.5 at butt . Can have Ivory joint . =
Right now not Ivory . I have both old growth and hard rock maple select =
shafts . Thanks Jim

IMG_2106.jpg


IMG_2105.jpg


IMG_2104.jpg
Click to expand...

This one makes me wish I could afford another cue. :frown:
 
I have an 8pt coco and bem Judd I'm going to put up- has a thinner handle and a jam up player. Just don't really use it or need it
 
lawman888 said:
I want a cue with a thinner handle or thinner butt taper. 2 shafts and I prefer a 4 point 4 veneer cue......ivory ferrules a plus and top makers only......shafts close to 13 and must be straight.....
I like ebony and I hate cocobolo, the rest I am not real picky about.

Budget is undetermined but can easily be between 500-3000. I also have some cues to use as trade bait for a bigger cue.......I have a wrap less Full splice Tasc unchalked with ivory joint, but I'd prefer to just buy something.....
I have a sickness.

With the wealth of knowledge from the Azers I would assume you all know who makes cues with that thinner butt taper so can help me:thumbup:

Email me what you got....pics and specs and price please
thecuehunter@yahoo.com

Thanks
Click to expand...

Loved my Judd for the exact same reason...the butt handle is perfect!

http://juddcues.com/

http://www.juddcues.com/prod1.html
 
Espiritu

I have about 14 cues from Russ Espiritu between $500 and $3000. 7 or so are one of a kind and very nice. the others are still nice but not the rare one of a kinds. He makes the thinest butts out of any of the other cues I've dealt with.
 
Thin handle BCM custom w/Ivory

This cue was designed by my Friend and built by Bryan Mordt from BCM cues !
It has two shafts w/ Ivory ferrules and Sniper tips....12mm both shafts
29-3/4" in length

Butt has Ivory slotted rings and 6-Ivory diamond inlays...3 on top and 3 on bottom
length of butt ...29-3/4"

Weight:
Butt 13.9 oz.
Shafts 3.2 and 3.3oz
3/8 s/s Radial joint pin

Handle dimesion...20.47mm at joint and 29.44mm at end of butt

****You can verify with Bryan what type of wood besides the beautiful Ebony ****

Cue was made for Thor !

photobucket-4696-1319865823464.jpg

photobucket-5381-1319864165693.jpg

photobucket-3845-1319863262355.jpg

photobucket-4836-1319861466945.jpg

photobucket-4102-1319860567536.jpg

photobucket-4726-1319858919177.jpg
 
You must log in or register to reply here.
Back
Top