i dont know abou the old cues , but ive seen some saying used titlelist points . is that good or bad , or cheap or good? you see it mentioned on bushkas and szams then you see mention of burton spain points . which are better ?
I would prefer a newly built butt by a compatent cuemaker over an old house cue conversion.i dont know abou the old cues , but ive seen some saying used titlelist points . is that good or bad , or cheap or good? you see it mentioned on bushkas and szams then you see mention of burton spain points . which are better ?
HUH?? The cues made by B'wick WERE made by competent cuemakers. Some of the best hitting cues ever made used Titleist blanks.I would prefer a newly built butt by a compatent cuemaker over an old house cue conversion.
The term "Titlist Points" refers to the color combination of the stacked veneers on the points; usually a combination of 4 of the following: green, orange, natural, violet, teal and possibly a few others.i dont know abou the old cues , but ive seen some saying used titlelist points . is that good or bad , or cheap or good? you see it mentioned on bushkas and szams then you see mention of burton spain points . which are better ?
If not abused a 30-40yr old Titleist still makes an awesome cue. I've hit cues made by Durbin, Gilbert and others that used old Titleist blanks and they played super good. Price have gotten high because of supply but that has nothing to do with how one plays. Those old B'wicks used very good wood and were made by craftsmen. Better than a lot of newer stuff i've seen.They were factory new, not found in a garage after 40 years. Just my opinion, I would not really want one, especially at the price some ask.
There is something about the history of old cues that can be intriguing. Converting them can be A LOT of work, often they are more work than building the cue from the beginning. For the Cue maker and If you use your imagination, Doing them can be quite the test but rewarding.i dont know abou the old cues , but ive seen some saying used titlelist points . is that good or bad , or cheap or good? you see it mentioned on bushkas and szams then you see mention of burton spain points . which are better ?
I deleted that post because I didn't want it to be a debate. I used to play in a bowling alley that had all Titleist for house cues. They were good cues as we're most house cues back then.If not abused a 30-40yr old Titleist still makes an awesome cue. I've hit cues made by Durbin, Gilbert and others that used old Titleist blanks and they played super good. Price have gotten high because of supply but that has nothing to do with how one plays. Those old B'wicks used very good wood and were made by craftsmen. Better than a lot of newer stuff i've seen.
Don't you have to be creative sometimes to get the points long enough to look pleasing?There is something about the history of old cues that can be intriguing. Converting them can be A LOT of work, often they are more work than building the cue from the beginning. For the Cue maker and If you use your imagination, Doing them can be quite the test but rewarding.
Yes, you have to be creative. You have to deal with every conversion on an individual bssis. No two are really the same. Some conversions start out as an already finished cue by someone else and some are over sized fatt butt house cues. Those that can be left wrapless are truly beautiful. It flat out broke my heart to have to cut a wrap on this one. It was a big butt fatty when it came to me that could have been left wrapless. The challenge starts when everything is measured and what the end result your looking for is determined. It's a test and can be a big one at that especially the area where the points are. As in any Cue, you have to accept what it's been thru over time and what it could be.Don't you have to be creative sometimes to get the points long enough to look pleasing?
In your pictures you have the wrap at the lowest point of the points. Did you have to add a piece to the end to get the length?
I bought a used Titlist conversion and was kinda bummed when I discovered that the points were not all even. I was told that is part of the charm of conversions because they are made from hand made cues. Im always sniffing around for Titlist conversions or original Hoppe Titlist's. I have a very nice unmolested Hoppe Titlist but cant bring myself to turning it into a conversion.There is something about the history of old cues that can be intriguing. Converting them can be A LOT of work, often they are more work than building the cue from the beginning. For the Cue maker and If you use your imagination, Doing them can be quite the test but rewarding.
Very rare to find an original Titlist with all four points even.I bought a used Titlist conversion and was kinda bummed when I discovered that the points were not all even. I was told that is part of the charm of conversions because they are made from hand made cues. Im always sniffing around for Titlist conversions or original Hoppe Titlist's. I have a very nice unmolested Hoppe Titlist but cant bring myself to turning it into a conversion.
Even points are rare as hens teeth on titlest cues.I bought a used Titlist conversion and was kinda bummed when I discovered that the points were not all even. I was told that is part of the charm of conversions because they are made from hand made cues. Im always sniffing around for Titlist conversions or original Hoppe Titlist's. I have a very nice unmolested Hoppe Titlist but cant bring myself to turning it into a conversion.
HUH?? The cues made by B'wick WERE made by competent cuemakers. Some of the best hitting cues ever made used Titleist blanks.
I don't blame you.I bought a used Titlist conversion and was kinda bummed when I discovered that the points were not all even. I was told that is part of the charm of conversions because they are made from hand made cues. Im always sniffing around for Titlist conversions or original Hoppe Titlist's. I have a very nice unmolested Hoppe Titlist but cant bring myself to turning it into a conversion.
Any (almost) Titlist conversion is good enough for me. All that matters is if I like it, I generally don't buy things to resell.I have a super old Tad made from a titlest. Points are pretty close on that one.
I remember a friend had about 40 of them in one piece still in the 80’s. Idk how many he has left, probably a few. He didn’t do many conversions. I looked through the stack and not one was perfect but some were “close enough”. I’ve seen a few that were just too far off to chop and do the work on.
Great cues,
I read somewhere at their peak B'wick's cue factory was making something like 400,000 cues/yr. with enough wood being dried to make 600,000 more. Wow.They made thousands of titlist house cues and I would think getting all the points even was not a top priority.
Anyone know about how many were made?
100's of thousands maybe?