White Linen Fiber Tube

C

CueCaps

AzB Silver Member
Silver Member
Delete my Post.. Did more harm than good.. Sorry Mason and all AZer's.
Sorry All, I will not review again..
 

Attachments

  • White Linen Fiber.jpg
    White Linen Fiber.jpg
    48.8 KB · Views: 231
Last edited:
JoeyInCali said:
I have them with .610 ID.
1 3/8 OD.
No weave, no cloth.
I just got some.
Click to expand...

Thanks Joey.
Always there to help others .. Cool!!!
Can't thank you enough.. I'm sure the whole AZ Famlily feels the same.. :)

Can't afford that..
That O.D. is too big to turn down. too much waste.
 
Alton....I have only two suggestions for you for white material with no trash. First is the Elforyn now being offered by Atlas...it machines easily & has zero trash. It does have a slight ivory tint so its not going to be the bright white you are looking for. My second suggestion...and maybe your best option is the Ivorine 4 that Atlas sells. This stuff is BRIGHT white and has absolutely zero trash in it. Its as clean a linen based product as I've ever seen. The downside is there is a definate weave pattern visable when looked at closely. The only other negative is its EXTREMELY hard and rough on tooling. You can't just spin it and hacksaw off a piece....it'll flatten the teeth on your hacksaw. You'll need carbide to cut it. It does machine nicely though when using sharp carbide tooling. I've yet to use any Ivorine 4 that had one single speck of thrash. It also cuts without pitting so you don't have to be so careful not to contaminate it either. Another plus is...like the Elforyn....they do now sell it in 1ft sections. The Elforyn is a bit pricey but the Iv4 is priced pretty fair...if I remember correctly, 1ft of the joint size solid rod of Iv4 is only about $24. 1ft of the Elforyn is almost twice that price. Hope this helps you buddy...this is the best solutions I can offer. Keep up the FANTASTIC work Alton...you are a true artist!:)
 
Mason does not sell trash!!

I choose to try the material for a purpose that it was not intended for..
I surrender.. Take me to the Gallows..
Note: I did not use the word "Trash" in my original post. It's such a ugly word.. Please be aware of this.. Thanks
 
Last edited:
1ft of the joint size solid rod of Iv4 is only about $24. 1ft of the Elforyn is almost twice that price
That's a freakin robbery if you ask me.:eek:
 
JoeyInCali said:
1ft of the joint size solid rod of Iv4 is only about $24. 1ft of the Elforyn is almost twice that price
That's a freakin robbery if you ask me.:eek:
Click to expand...

At least you aren't forced to buy 3ft minimum.:eek:
 
You must log in or register to reply here.
Back
Top