wood/shaft sealer or conditioner
- Thread starter bBurton
- Start date
We did some testing on that stuff years ago and it yellowed. Does it still yellow or is it clearer now when aged?
These are the options I have tried, they all have advantages and disadvantages.
cyanoacrylate, shellac, which you can get in flakes or premixed.http://www.rockler.com/zinsser-bullseye-sealcoat The flakes can be mixed in any size batch you want but it does have a shelf life so small batches is recommended and I would also suggest supper blond or platina. http://www.shellacshack.com/purchase-shellac-flakes.html
There is also a product by minwax
http://www.homedepot.com/p/Minwax-1-qt-Satin-Polycrylic-Protective-Finish-63333444/202061476
And of course you have a variety of waxes which if you do a search has been well discussed.
I like shellac followed by wax.
cyanoacrylate, shellac, which you can get in flakes or premixed.http://www.rockler.com/zinsser-bullseye-sealcoat The flakes can be mixed in any size batch you want but it does have a shelf life so small batches is recommended and I would also suggest supper blond or platina. http://www.shellacshack.com/purchase-shellac-flakes.html
There is also a product by minwax
http://www.homedepot.com/p/Minwax-1-qt-Satin-Polycrylic-Protective-Finish-63333444/202061476
And of course you have a variety of waxes which if you do a search has been well discussed.
I like shellac followed by wax.
I have never seen Deft sanding sealer yellow even on an old shaft.
I have tried the water based stuff and I did not like it.
Shellac is ok until you wipe it with a alcohol wipe then it gets sticky.
The local stores stopped carrying Deft as it is lacquer and you are an environmental terrorist if you speak the name.......... I have to buy it online now.
Kim
Joe,
Don't you sell a proprietary shaft sealer? I have a bottle somewhere, but the last time I used it I wasn't getting a particularly smooth shine and finish from it. Are there any tips you might have when using your product? Maybe buffing with a certain type of cloth on higher speeds? Any advice would be appreciated.
To the OP, I've messed around with Qualasole and Unique's sealer. Although they both came in smaller containers, I think you can find the former in pints and gallons.
Last edited:
second on the sanding sealer, there are a few different brands of sanding sealer. i always wax after sealing.no yellowing.
Last edited:
It is the stinkiest most awful smelling one out there.
I can only imagine the stink if someone has a basement shop.
I've been using Joe's sealer for around two years and love it. I apply with a paper towel while spinning, let dry, hit it with 600 grit, apply second coat, hit with 600 grit, and wax.
It isn't Joe's instruction but it is what works well for me. I am getting much better results than I was with lacquer based sealers. Plus, no harsh chemicals.
I presume you are specifically referring to Speed Seal II?
Yes, sir. Its good stuff.
Due to fumes and dust, I developed a polyp in my sinus. I had to have surgery and numerous visits with tools stuffed into my skull. Enjoy the smell while you can...
My old cabinet maker back in Missouri was was spraying some cabinets with lacquer and one of his younger sons slipped into shop and was standing over the bucket of lacquer. The dad looked over and saw him and stopped spraying. The young boy looked up and said in a very slurred voice, "That stuff smells delicious."
Needless to say they got him out of there in a hurry.
I do wear a respirator that prevents me from smelling it while I work with it.............
Kim
Ryan answered it best: apply, let dry and lightly sand. Great stuff and safe too. Thanks guys!
likestorack
Registered
https://www.google.com/search?q=wat...txwIVRIYNCh14-Q5Y&dpr=1#imgrc=X2l7oyvUEPce6M:
this is what i use for sealer works great i put on 3 coats then sand smooth then wax feels great dries fast :thumbup:
this is what i use for sealer works great i put on 3 coats then sand smooth then wax feels great dries fast :thumbup: