WTB: Cue for $800 or less

johnf_34

johnf_34

JF - Fitz Cues!!
Silver Member
I actually have some cash for another cue, case, or both since another deal I was workign on didn't pan out.

I'm open to pretty much any nice custom cue or case, but would love to find wrapless Titlist conversions, Hunter Classics, Abears, Kenny Murrell, Zylr, Justis cases, or anything along these lines. I would prefer to keep it under $800, but for the right cue, I may be able to squeeze out just a little more!

You can either post, PM, or email me at johnf_34@hotmail.com with any cues/cases/combos available!

Thanks!
 
Last edited:
-R- Rosewood Fullsplice w/Veneers & Ivory Hoppe

:D just in case....

100_3772.jpg


100_3776.jpg


here's a couple teaser pics ;)
 
Oh yeah! I got sidetracked with everything else....I'm glad you reminded me of it. It is a nice wrapless full-splice!
 
Good luck bump!!!

John,

Good luck on your search. That R is very nice!!
But then again, I got a Zylr in your range:D

I will probably start a similar thread soon, so good luck on your search.

Anybody who hasn't dealt with John before, just want to let you know that he is a great AZB'er, and no worries with him!!!

Michael
 
How about a really nice, brand new Paul Dayton? Birdseye forearm with 4 razor sharp, long ebony points with birdseye recuts, ebony butt sleeve with 4 birdseye windows, linen wrap, radial pin, 2 shafts. If interested, let me know and I will list the full specs...only $750 shipped in the US.

Joe

Daytonrecut4pointcomposite.jpg
[/IMG]
 
I was so excited at that cue, I missed the Y in Dayton....

Anyway, I will definitely be thinking about this one! I haven't tried one of his cues yet and this one is a nice looking cue. Would you say this cue is pretty stiff? I really like a very stiff cue.
 
johnf_34 said:
I was so excited at that cue, I missed the Y in Dayton....

Anyway, I will definitely be thinking about this one! I haven't tried one of his cues yet and this one is a nice looking cue. Would you say this cue is pretty stiff? I really like a very stiff cue.
Click to expand...

I would say it is pretty stiff, but not as stiff as Sugartree, Barnhart, Southwest, and those cues. Paul's cues have a stiff hit while maintaining a comfortable player's taper. Great balance...

Joe
 
Barry Cameron Cue / Judd Fuller Shaft w/ Effren Taper

I have a Custom made Barry Cameron Cue available. Specs are below. I'll include a 1x2 Imperial case. Looking to get $800, but will entertain offer as low as $700.

3 Hi and 3 Low Ebony points into Highly Figured Bird?s Eye Maple
Red and Black Veneers that really add a nice accent
Soft and supple Ostrich leather wrap
Ebony Butt with 6 Ivory Diamond Inlays
Ivory joint and Ivory Butt Cap
Butt portion is 29.25 inches long

Shaft is custom made by Judd Fuller
30 inches long with his signature Efren Reyes taper
approximately 12.25 ? 12.5 mm tip
Shaft has only been played for 7-10 hours

Total weight feels like 18.5 - 19 oz. I don?t have a scale to measure.
Well balanced. Balance point is about 19 inches from butt end.
Condition is very good. There are 2 minor chips in the finish smaller than a bb and the rubber bumper has seen better days.
 

Attachments

  • cameron whole2.JPG
    cameron whole2.JPG
    54.6 KB · Views: 99
  • cameron joint2.JPG
    cameron joint2.JPG
    56.9 KB · Views: 97
  • cameron butt2.JPG
    cameron butt2.JPG
    67.1 KB · Views: 87
I have definitely seen some nice cues! Keep them coming. I've got one or two that I'm definitely thinking about so far. Thanks for all the posts, PMs, and emails!

I would love to find the stiffest hit I can find in a 59"-60" cue if possible!! But a wrapless 58" cue works too as long as it has a very stiff hit!!
 
I definitely have it narrowed down....any more before I figure out which one it will be??
 
I can work with ya on my 6-point ebony into maple Steve Klein cue, sir.

If it's a real player you're after, this would be it!! :) ;) There's a thread about it here on the boards.
 
I actually saw that cue and was definitely excited to see it. It's definitely a sleek look for Steve. I currently have a titlist that he is converting.

I will probably talk with you more about that Klein cue! My only problem is that I'm not the biggest fan of the SS joint....the 5/16x14 pin doesn't bother me though....
 
Yeah, I noticed you put that up for sale....definitely playing towards that fact that I want an ebony titlist....

Well, I just went from having it narrowed down to maybe two....now back up to four I think. I love the options though....
 
Got another one

John,

Of course, I have another Carmeli with 2 shafts, but a phenolic joint that will also be a little under the tribute- around $700. It will be a 6 pointer (3hi-3low) ebony forearm. I should get it Monday. Just let me know.
Just another option to put on your list.

Decisions, decisions, decisions.

Michael
 
You must log in or register to reply here.
Back
Top