Diamonized GC II
- Thread starter JoeyInCali
- Start date
The cushions were replaced by Glen and Donny ( SDBilliards ).
Donny installed the cloth meticulously.
Took him 3+ hours .
Glued to the side of the slates dead f'n square. Saw him how he did it .
Just da nuts.
I don't see any lines or creases ( sp ? ).
Donny even put a liner under the slates in the pocket area to cover the wood totally. Great touch.
They are supposed to be 1/2 to 3/4" wider than the corners I believe.
Joey, you left out Zack. We worked along side each other on your rails, under Glens instruction. Your subrails are the correct hieght, your bevel is at a better playing angle, we corrected the sanded down subrail head and many other things that would be to hard to explain without pictures. Funny I left your house at 11PM and you posted 30 minutes later, I'll take that as your happy.
thanks for your patience. Enjoy your table.
Donny
That would be correct Joey:grin:
Oops.
Thanks Donny. I'm trying to find my old pix of the table to show before and after pix.
Last edited:
:grineaper slate shelf and you got a Diamond
It's tough enough.
The opening tapers down pretty drastically.
So when people say they have a tight 4.5" corners or less but the two faces remain constant ( or close ), it'd be much more forgiving.
It's tough enough.
The opening tapers down pretty drastically.
So when people say they have a tight 4.5" corners or less but the two faces remain constant ( or close ), it'd be much more forgiving.
Now Joey...having had K66 cushions on your table before, switching to K55 cushions, and having the rails calibrated to the right spec's....can you tell if there's a difference in how your table plays today vs before?
Glen
HUGE DIFFERENCE!
The diamond system on the Kicking Academy pdf file here is dead-on.
An RKC Gold Crown template is needed on this table.
Last edited:
Nice work. I am looking forward to the day my table gets 'diamondized'
That days closer than you'd think:grin:
RKC'd you mean. :grin:
It'll play pretty tight.
The balls bounce off rails the table is a Verhoeven 3-c table.:smile:
How about cobra's engraved on the corner castings, wouldn't that be too cool!
All you probably lack is having "Diamond" engraved on the table and a few Simonis stickers. :grin:
Now if Gleno had some snake stickers made that would be
He really should just stamp serial numbers on RKC Gold Crowns. :grin:
I think mine is RKC GC 007. :grin:
Are you using I-10 to go from Cali to Maryland??????:grin-square::wink:
There is this nice little hick town on the way called Phoenix...It has great food, great weather and a few pool tables here and there that are in desparate need of a real mechanic.....I am sitting next to one of them right now....:wink: