Obviously I asked too complicated of a question for you people. Why is it every time someone asks me a question I try to help them out as much as possible but when I ask something I have ten f*cking idiots chiming in with useless shit and being f*cking morons? If it was so easy to f*cking google it I would have had it already but instead I spent most of the day looking it up and still am no further along.
ElCorazonFrio
Yes I know what a radius is and I used the word radius because every wrap template I have ever seen advertised says "cut the radius" at the ends of the wrap blank.
https://www.cuesmith.com/a-leather-wrap-fixture-449.html
"Leather Wrap Template for cutting the proper radius on the ends of the leather wrap when cutting it to length."
http://www.uniqueinc.com/inc/sdetail/1933/5253
"Leather Cutting Template for cutting the ends of the leather. Radius is a median for cues, which allows the leather wrap to tuck into the channel very nice."
http://forums.azbilliards.com/showthread.php?t=353014&highlight=wrap+template
"Is there any interest in a leather wrap radius template and measuring guide?"
So obviously some very smart people that make the templates also call it a radius so I'm not alone. And since it is "the specific distance from the center in all directions" (webster dictionary not me) I would say it is definitely a radius because it is a specific distance from center. I am sorry; however, that everyone that sells these things calls it that. I will get right on notifying everyone that you said they were incorrect and that they should change their wording immediately.
KJ
If it is a relatively easy calculation then why instead of telling me how relatively easy it is, Didn't you just put the equation there. Probably took more time to write out a smart ass comment then it did to just write out the math. That is unless it isn't a n easy calculation. This is the closest thing I could find, and nowhere in there is anything resembling simple math.
http://www.woodweb.com/knowledge_base/Wrapping_a_cone_with_laminate.html
Oh and I'm not home before I knew it just in case you where wondering, and am still no closer to finding the answer . But thanks for all the great help you gave.
I am so f*cking tired of seeing some one say every two seconds google it. Every time I see it i just want to tell the person to go f*ck themselves. I mean seriously.
This is how my day started. I got up and and had this really great idea. But I needed an exact number to feed into my 3d rendering software so I could have the part built. So the first thing I did was spend an hour onl AZBilliards looking through old posts trying to find if it had ever been answered before. I know it had been asked before because I asked it and all I got was a bunch of *ssholes saying google it.
So then I went to google and spent another two hours just searching for anything even remotely close to what I am looking for. I found bits and pieces here and there but nothing definitive. So after two hours of searching google I figured well maybe I can ask a simple f*cking question and get a simple f*cking answer on AZBilliards. (I know your thinking, yeah right, that will work.)
Then the first reply I get is someone saying how superior they are to me because its "a relatively simple math calculation" And they ask if I need more clues? Really if I was there I would choke the f*ck out of them with my bare hands, but I'm not. Do I need more clues? Yes obviously I do. I google "simple f*cking math" and it came up way short of anything useful just like the reply I got from him!
Then he tells me to google it. F*ck you. I did google it. At this point I have been on google more today than I have been getting stuff done because of the stellar f*cking help I got from here saying google it.
Then I get someone saying "I don't think he knows what a radius is" Again F*ck you. Seriously? You're going to f*ck with me because I used a word that everyone in the industry uses. Go f*ck yourself. Then someone attaches pictures. I know how to find the radius of the f*cking circle it s the radius of the cut I cant figure out. Again if it's so f*cking easy why not just say how to do it instead of acting like a superior *sshole.
So now its 10 pm I have worked off an on all day trying to figure it out and have spent about 7 or 8 hours collectively researching it. I still have no Idea what the answer is.
At this point I have just given up hope that anyone at AZBilliards knows the answer and there is just a bunch of trolls with nothing better to do than f*ck with someone who needed a little bit of help. Why don't you guys just go to the hospital or old folks home and start pushing people down the stairs too. Self righteous pr*cks.
All you do by saying google it is show that either A you don't know the answer and should have kept your mouth shut in the first place, or B you know the answer and want to act like a self righteous *sshole and should have kept your mouth shut.
Dont give me the bullsh*t sob story that you spent a hundred years learning your craft. You didn't invent the f*cking wheel, you. And since 90 percent of the cues on the market today are made in mostly the same way, You got help from someone else, because you cant tell me every single person who ever built a cue came up with the exact same ideas on their own. Give me a break!!! All saying that does is prove your and idiot or an *sshole.
I realise that there are people out there way smarter than I am. I also realise that there are people that have spent many years, and a lot of money, perfecting the trade. However if you are so worried about giving out the radius of a f*cking cut on a wrap you will never touch and has no bearing on your business in any way, Then I feel sorry for you.
Now if there is anyone who actually either knows the answer, Knows how to get the answer and is willing to help, or Has a wrap fixture and wouldn't mind taking a couple seconds to take a few measurements. I would greatly appreciate it.
If all you are going to do is troll and act like an asshole then move along.