Real King Cobra hits New Orleans

I like working on pretty much any kind of quality built pool table, but my favorite is the Diamonds, the Professionals to be more direct, because I like to refinish them while I'm rebuilding them. It's like taking an F- student and turning them into an A- student. What I mean by that is yes, the play ability is for sure better on the Diamond's, but the LOOK is so much more improved overall, that it looks like a new table when it's finished. I even go so far as to install carpeting behind the leather drop pockets so you don't hardly hear a sound when a ball gets pocketed, and on this table I redyed the leather pocket liners to look like new as you can see in the pictures. It takes time to refinish a table like this one, stained twice, and 7 coats of tung oil for the finish. But, it's what I enjoy doing:D

View attachment 217972

View attachment 217973

View attachment 217974

WOW. Cleaner then the board of health right there sir. Props from a former employee of Cascade and KRC. :cool:
 
You make room for a table yet Jason?...or did you trade in your cue for pampers:D

Diapers....LOL. No. I'm not as old as you pal...

images.jpg


=

19381-depend20underwear201.jpg



:p Give me a shout when your near the grand canyon buddy. :cool:
 
Yes, but as soon as I get to the Diamond factory, I'm picking up a Diamond Pro 8 and taking off up to Canada to deliver it to one of my customers, it's long over due for delivery so I'm not taking on any other jobs until I get Ian his table first. What do you need done?

Glen

When?????? every week you say you have one more table left and your on your way with my table,and the next week it`s the same story,and this has been going on since April 13th.,2011. Glen either ship it,or deliver it,I just want my table. I paid for it,and paid you for a service that you are not completing.:(
 
When?????? every week you say you have one more table left and your on your way with my table,and the next week it`s the same story,and this has been going on since April 13th.,2011. Glen either ship it,or deliver it,I just want my table. I paid for it,and paid you for a service that you are not completing.:(

Ian, I finally delivered and set up the 7ft ProAm I told you I had to get done, what a job. Had to cut the slate in half, then steel plate join it back together again so I could still use the leveling system, and I added some trick trim to the bottom of the body between the legs all the way around to kind of break up the box look of the table and kind of picture frame it a little bit. Had to take out the 7ft Gabriel's Signature Pro from upstairs also to make room for the Diamond to go in. I'm trying to get back to the factory as quick as I can so I can get you your table, but if you'd like I'll again find out how much the shipping of the table to you up in Canada will run, but last time I asked about the cost, it was going to be about $200 maybe a little bit more than the $800 you still have left owing. I'll call Brian on Monday and see if we can schedule a date for shipping if I can't be turned around by next weekend headed back. I'm turning down jobs just to cut my time short, turned down 7 jobs alone in Kenner, LA while I was working on the Diamond there at the Corner Pocket. I only have a few things left to get done, one if them is to move Billy Incardona's 9ft ProAm/3 piece slate into another loft where he lives, I really don't want anyone else touching his pool table....you can understand that I hope:D

IMG_0061.JPG

IMG_0067.JPG

IMG_0068.JPG
 
Ian, I finally delivered and set up the 7ft ProAm I told you I had to get done, what a job. Had to cut the slate in half, then steel plate join it back together again so I could still use the leveling system, and I added some trick trim to the bottom of the body between the legs all the way around to kind of break up the box look of the table and kind of picture frame it a little bit. Had to take out the 7ft Gabriel's Signature Pro from upstairs also to make room for the Diamond to go in. I'm trying to get back to the factory as quick as I can so I can get you your table, but if you'd like I'll again find out how much the shipping of the table to you up in Canada will run, but last time I asked about the cost, it was going to be about $200 maybe a little bit more than the $800 you still have left owing. I'll call Brian on Monday and see if we can schedule a date for shipping if I can't be turned around by next weekend headed back. I'm turning down jobs just to cut my time short, turned down 7 jobs alone in Kenner, LA while I was working on the Diamond there at the Corner Pocket. I only have a few things left to get done, one if them is to move Billy Incardona's 9ft ProAm/3 piece slate into another loft where he lives, I really don't want anyone else touching his pool table....you can understand that I hope:D

View attachment 218463

View attachment 218464

View attachment 218465

It`s 85 and sunny today,blue skies,even the dogs are taking it easy.
 

Attachments

  • 546596_3536867698046_1162966018_33527895_1761152003_n.jpg
    546596_3536867698046_1162966018_33527895_1761152003_n.jpg
    73.1 KB · Views: 409
Price just went up, delivery & setup.....+ your dog...or no deal:thumbup:

That would be great,But he wouldn`t move.When playing he lies right by the table and doesn`t budge,and the balance and body posistion of your stance,lol.It`s like Tia Chi,and there are 2 of them and the wife want another!
 

Attachments

  • 391533_414526248563890_100000195542821_1781897_578723055_n.jpg
    391533_414526248563890_100000195542821_1781897_578723055_n.jpg
    89.3 KB · Views: 384
Nice pups!

That would be great,But he wouldn`t move.When playing he lies right by the table and doesn`t budge,and the balance and body posistion of your stance,lol.It`s like Tia Chi,and there are 2 of them and the wife want another!

Very nice pups! I assume bull mastiffs. A friend had one named James. James was trained to go to the door and bark when the door bell rang but overall a sweetheart when he knew you. Mr. Hagen's shop and office were at his home and we were working on several projects together so it made sense that I be on good terms with James. Normally Mr. Hagen gave James a treat after he barked but he started having me give him the treat after I was inside. Soon James quit barking when I rang the doorbell, refused to bark regardless of encouragement.

Once I was inside and could get to the treat barrel then James would bark! No sense wasting breath and effort when I couldn't give him a treat anyway. :D

Hu
 
When will you be in St. Louis

Real King Cobra, I've been waiting for you to visit St. Louis. I have a Diamond Professional ready to be tuned up with new rails, etc, etc.
 

Attachments

  • 100_0909.jpg
    100_0909.jpg
    94.3 KB · Views: 575

Attachments

  • 403968_10150753755415935_593995934_11674753_1618361753_n.jpg
    403968_10150753755415935_593995934_11674753_1618361753_n.jpg
    7.7 KB · Views: 495
Last edited:
There waiting

For the cobra-man,don`t worry,they don`t have teeth yet!
 

Attachments

  • 7610cd8_20.jpeg
    7610cd8_20.jpeg
    39.6 KB · Views: 422
Damn buddy...they feeding off da moma...or do you have a COW out back they're getting their milk from:yikes:....LOL
 
I don't go there

Hu, you ever get over to the Corner Pocket to try out that Diamond I rebuilt?:grin:

Glen


Glen,

I would like to but Jamie annoyed me one time too many and I vote with my wallet, I don't go to the corner anymore. I know that you didn't tighten any up that much at Buffalo's but I heard you recovered one table and recovered and tuned one. Which one did you tune?

Hu
 
Glen,

I would like to but Jamie annoyed me one time too many and I vote with my wallet, I don't go to the corner anymore. I know that you didn't tighten any up that much at Buffalo's but I heard you recovered one table and recovered and tuned one. Which one did you tune?

Hu

Sorry to hear that buddy, up at Buffalo's I just recovered the ProAm near the bathroom, and leveled the other one. One of these days I might make a trip back there to work on some of the other Diamond's, who knows;)
 
Back
Top