Requested pics of "WheatCues"

WheatCues said:
I cleared my PM's

Also, my address is: cuesmith1@yahoo.com

My # is: 321-631-1827 if you want to call anytime !



Thanks, Eddie Wheat


emailed twice, called twice ( no number display screening )

no reply ..

i guess it was not meant to be....

all the best,
kam
 
arm span

turbo said:
this is just killing me...

WTF is an armspand????? :confused: :eek:

In case you are serious instead of just making fun of the spelling, arm span, same as wing span, roughly the same as your height but it varies person to person.

Hu
 
ShootingArts said:
In case you are serious instead of just making fun of the spelling, arm span, same as wing span, roughly the same as your height but it varies person to person.

Hu

i wasn't trying to make fun, I just couldn't believe all this time nobody pointed this out to mr Wheat. i'm not surprised he doesn't know, although he almost uses it in every post he writes.
 
spell checker usually saves me

turbo said:
i wasn't trying to make fun, I just couldn't believe all this time nobody pointed this out to mr Wheat. i'm not surprised he doesn't know, although he almost uses it in every post he writes.

The spell checker usually saves me. I have some words that my brain knows how to spell perfectly well but my danged fingers don't! Too when typing fast I interchange words that sound the same. Or and are, to, too, and two, and so on. Interestingly the latest whine from academic circles is that chatroom shorthand is sneaking into formal writing.

Hu
 
kamdaswani said:
emailed twice, called twice ( no number display screening )

no reply ..

i guess it was not meant to be....

all the best,
kam
Kam,
I don't know if this helps but, he is a night owl. Right now he is probably sleeping and won't get up til 3 pm (Eastern time). As far as the emails? Couldn't tell you.
 
What in the hell ?????

I appreciate your interest in veiwing this thread but what in the hell is the last dozen or so posts about ?????

Armspand ??? wingspand ??? spellchecking ???? cars ????

I'm a wee bit confused !!!

will one or more of these poster's please explain what's goin on here !!!!



- Eddie Wheat
 
kamdaswani said:
emailed twice, called twice ( no number display screening )

no reply ..

i guess it was not meant to be....

all the best,
kam


KAm, Please leave a message this way I know you called and also have a number to get back to you with....

I receive quite a few calls a day and some are "sales" so it makes it hard to filter through the caller I.D.

I do return all calls and are looking forward to doing business with you so if you like... give me your number and I'll call you if that makes it easier !!!

Arm9baller is correct about my sleeping habits.... also I care for a 94 yr old grandma that resises with me so it makles it much easaier for me to work in the evening through the early a.m. hours....


Thanks, Eddie Wheat
 
Sorry for the hijack Eddie

I guess you are incorrect in using the term "armspand" as oppose to "wingspand". WE HAVE WINGS!

I just got caught up in car talk. Sorry.
 
ARM9BALLER said:
I guess you are incorrect in using the term "armspand" as oppose to "wingspand". WE HAVE WINGS!

I just got caught up in car talk. Sorry.

You might have wings...

But since I'm not an albatross and are of human origin I have ARMS !!!

Just kidding.... I figured as long as we are all on the same page what does it matter !!!!:D

Seriously though, since I am not using the measurement of the entire wingspand and are really only focusing on 1-1/2 of the non stretched wings.. it really doesn't make much sense to me to use the term wingspand when I am discussing armspand in it's correct context of the conversation.... :)


- Eddie WHeat
 
Last edited:
jesus christ!!

if you're going to constantly use a word, especially when you're using it in the context of your "profession", know how to spell it!

armspand.

arm, one word.
span, another.
spand, doesn't exist.
spanned, v2 form of span.
spandex, you get it...

also you might wanna look up satisfaction, and guaranteed.

cause as far as i know, it means you don't finalize your work when you upset a customer, by cracking their ivory ferrule during a simple tip replacement, blaming a seasoned master cuemaker for using weak ivory, saying your "out of" ivory and replacing it with a piece of crap that nobody would even use it for plumbing purposes, yet charge me for it along with the tips for both shafts, labor,and cleaning of shafts which made them uneven and bumpy, shortening the shaft that YOU already messed up, not having change for a $50 bill and asking your unsatisfied customer to run down to the gas station and get change, while im there pick up a six-pack, YET call me to tell me that the "good" ivory you ordered had come in and if i'm willing you'll be more than happy to replace it, ONLY FOR THE COST OF THE FERRULE!!!!!!!

now,

get it?
 
turbo said:
jesus christ!!

if you're going to constantly use a word, especially when you're using it in the context of your "profession", know how to spell it!

armspand.

arm, one word.
span, another.
spand, doesn't exist.
spanned, v2 form of span.
spandex, you get it...

also you might wanna look up satisfaction, and guaranteed.

cause as far as i know, it means you don't finalize your work when you upset a customer, by cracking their ivory ferrule during a simple tip replacement, blaming a seasoned master cuemaker for using weak ivory, saying your "out of" ivory and replacing it with a piece of crap that nobody would even use it for plumbing purposes, yet charge me for it along with the tips for both shafts, labor,and cleaning of shafts which made them uneven and bumpy, shortening the shaft that YOU already messed up, not having change for a $50 bill and asking your unsatisfied customer to run down to the gas station and get change, while im there pick up a six-pack, YET call me to tell me that the "good" ivory you ordered had come in and if i'm willing you'll be more than happy to replace it, ONLY FOR THE COST OF THE FERRULE!!!!!!!

now,

get it?

Now that you know armspand is the same thing as wingspand... just chill out and have a beer....jeeeeez :grin-square:
 
Bigjohn said:
Now that you know armspand is the same thing as wingspand... just chill out and have a beer....jeeeeez :grin-square:

please...

say no more...

i guess you didn't read my whole post before you quoted it.

;)
 
turbo said:
jesus christ!!

if you're going to constantly use a word, especially when you're using it in the context of your "profession", know how to spell it!

armspand.

arm, one word.
span, another.
spand, doesn't exist.
spanned, v2 form of span.
spandex, you get it...

also you might wanna look up satisfaction, and guaranteed.

cause as far as i know, it means you don't finalize your work when you upset a customer, by cracking their ivory ferrule during a simple tip replacement, blaming a seasoned master cuemaker for using weak ivory, saying your "out of" ivory and replacing it with a piece of crap that nobody would even use it for plumbing purposes, yet charge me for it along with the tips for both shafts, labor,and cleaning of shafts which made them uneven and bumpy, shortening the shaft that YOU already messed up, not having change for a $50 bill and asking your unsatisfied customer to run down to the gas station and get change, while im there pick up a six-pack, YET call me to tell me that the "good" ivory you ordered had come in and if i'm willing you'll be more than happy to replace it, ONLY FOR THE COST OF THE FERRULE!!!!!!!

now,

get it?

You're funny !

I think I have a pretty darn good vocabulary and a pretty accurate spelling sense too !

Although I may not always be 100% correctly spelled with everything I type... I darn sure know what I'm talking about as well as the customer does due to extensive details I'm not shy about expressing !!!

So basically, you just wanted to heckle me a little I take it !

I'm NOT trying to be perfect in everything I do so please do NOT include spellchecking in my cuemaking equation the 2 have ZERO to do with each other

By the way... if you are referring to HAN"S ivory ferrule... it's pretty friggin tough to chip a ferrule when you are 100% on the tip when trimming it off !!! the ferrule's intergrety was already compromised before I touched it... besides I offered to replace it with an exact Ivory one.... that is between me and HIM and has zero to do with you unless you are HAN !

Also why should I eat the cost of an ivory ferrule when I didnt touch it to begin with ????

I make sure my customers are 100% happy with my work and have never failed yet... I made several phone calls to HAN for him to come in and have the Ivory ferrule installed and I agreed to give it to him at WHOLESALE COST around 25.00 just to be nice and helpful... I never heard back from Han and now months later this is what I get for trying to rectify a situation that was not DIRECTLY my fault ????

Also my work never leaves my shop "bumpy or uneven" check your facts !

Just goes to show you that.... YOU CAN'T PLEASE EVERYONE REGARDLESS !


Get it ! !:D


- Eddie Wheat
 
Last edited:
WheatCues said:
You're funny !

I think I have a pretty darn good vocabulary and a pretty accurate spelling sense too !

Although I may not always be 100% correctly spelled with everything I type... I darn sure know what I'm talking about as well as they customer dir to extensive details I'm not shy about expressing !!!

So basically, you just wanted to heckle me a little I take it !


I'm NOT trying to be perfect in everything I do so please do NOT include spellchecking in my cuemaking equation the 2 a have ZERO to do with each other !:D




- Eddie Wheat

oh i get it! you don't remember this incident, evidently.

why would you? right?

im not to judge your cuemaking or toolmaking skills. i am telling a true event that happened right there where you're sitting, sipping on your beer right this second, in your garage.

but i guess ill just start another thread for this and get some opinions from fellow players, posters.

yes, i am Han.
maybe you should have told me that since the tip is so close to the ferrule, which i dont think it was, that it could possibly crack.
maybe you shouldn't have charged me for the so called ferrule that you put on "for the time being"
maybe you should have some change in your pocket for hmmm.. giving change back, or run your own ass down to the gas station to get some, instead of asking an already annoyed customer.
maybe you shouldnt have blamed Paul Drexler for installing such crappy ivory.

this time,

got it?
 
Last edited:
turbo said:
oh i get it! you don't remember this incident, evidently.

why would you? right?

im not to judge your cuemaking or toolmaking skills. i am telling a true event that happened right there where you're sitting, sipping on your beer right this second, in your garage.

but i guess ill just start another thread for this and get some opinions from fellow players, posters.

yes, i am Han.
maybe you should have told me that since the tip is so close to the ferrule, which i dont think it was, that it could possibly crack.
maybe you shouldn't have charged me for the so called ferrule that you put on "for the time being"maybe you should have some change in your pocket for hmmm.. giving change back, or run your own ass down to the gas station to get some, instead of asking an already annoyed customer.
maybe you shouldnt have blamed Paul Drexler for installing suck a crappy ivory.

this time,

got it?

LOOK HAN !!!

YOU COME TO MY SHOP IN THE LATE EVENING TIME TO GET A REPAIR JOB DONE... FORGIVE ME FOR NOT HAVING CHANGE for a 50.00 bill

secondly, no one gets anything for free especially since I did NOT build the cue....

Thirdly,ferrules are not supposed to crack when doing tip replacements so why would I even bother forwarning you about possible chipping when it's not warranted

finally... who gives a damn about what I drink or do in my personal life.... I offered to reapir it at 100% and you never return my calls

You are out of line coming on here publically bashing me for a defective ferrule... paul drexler is not above making a mistake and I am not saying he did... Ivory is a very peculiar bone and since it's grainy alot of varibles can cause it to come apart, chip or break throgh general playing and storing conditions... it's not common but happens.....

I still am willing to replace it for my cost of and Ivory ferrule and tip... just to make you happy and save face... but when you fail to call me back after I made every attempt to rectify thge problem and you go on here showing your ass about it, I think that is definitley uncalled for !


- Eddie Wheat
 
Back
Top